Sharp MX-6240N User manual
QUICK START GUIDE
Keep this manual close at hand for reference whenever needed.
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
Model: MX-6240N/MX-7040N
BEFORE FIRST USE ......................................2
OPERATION MANUALS AND
HOW TO USE THEM ......................................6
CAUTIONS ......................................................7
NAMES OF PARTS AND POWER INPUT .....11
HOME SCREEN .............................................12
COPY .............................................................13
FAX.................................................................15
SCAN .............................................................17
DOCUMENT FILING .....................................19
PRINTER ........................................................21
COPY OUTPUT ..............................................22
MANUAL FINISHING .....................................24
SPECIFICATIONS .........................................26
SUPPLIES .....................................................32
OPTIONS ......................................................33
ADMINISTRATOR ..........................................36
OTHERS
(NOISE/MATERIAL EMISSION) ....................37
2
For the users of the fax function
ABOUT THE TELEPHONE CONSUMER PROTECTION ACT OF 1991
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message
clearly contains in a margin at the top or bottom of each transmitted page or on the rst page of the transmission, the date and time it is sent and an identication of the business or other entity, or
other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual.
(The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)
In order to program this information into your FAX machine, you should complete the following steps:
See “Own Name and Destination Set” of User's Manual.
• If any of your telephone equipment is not operating properly, you should immediately remove
it from your telephone line, as it may cause harm to the telephone network.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specically designed for wet
locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm. There may
be a remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
• Do not install or use the machine near water, or when you are wet. Take care not to spill any
liquids on the machine.
• Save these instructions.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA.
On this equipment is a label that contains, among other information, a product identier in the
format US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
The REN is used to determine the number of devices that may be connected to a telephone
line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call.
In most but not all areas, the sum of RENs should not exceed ve (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN for this product is part of the product
identier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, your telephone company may
disconnect your service temporarily. If possible, They will notify you in advance. If advance
notice is not practical, you will be notied as soon as possible. You will also be advised of your
right to le a compliant with the FCC.
FCC Notice to users:
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of your equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modications to
maintain uninterrupted service. If the equipment is causing harm to the telephone network, your
telephone company may ask you to disconnect the equipment until the problem is resolved.
If you have any questions or problems which cannot be solved by reading this manual, please
contact.
Sharp Electronics Corporation
1 Sharp Plaza,
Mahwah, NJ 07495
Telephone: 1-800-BE-SHARP
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Important safety instructions
BEFORE FIRST USE
BEFORE FIRST USE
3
This equipment connects to the telephone network through a standard USOC RJ-11C network
interface jack.
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this equipment does not disable your alarm equipment.
If you have questions about what will disable alarm equipment, consult your telephone
company or a qualied installer.
NOTICE FOR USERS IN CANADA
“NOTICE : This product meets the applicable Industry Canada technical specications.”
“NOTICE : The Ringer Equivalence Number is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the RENs
of all the devices does not exceed ve.”
The REN of this equipment is indicated on the facsimile expansion kit.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines service is subject to state tariffs.
Contact your state’s public utility commission, public service commission or corporation
commission for more information.
BE SURE TO ASK YOUR AUTHORIZED SHARP DEALER ABOUT THE WARRANTY THAT
YOUR SELLING DEALER EXTENDS TO YOU. In order to assure you, the end-user, of
warranty protection, Sharp extends a limited warranty to each of its authorized dealers and,
in turn, requires each of its authorized dealers to extend its own warranty to you on terms
that are no less favorable than those given to the dealer by Sharp. You should be aware,
however, that Sharp does not itself extend any warranties, either express or implied, directly
to you, the end-user, and no one is authorized to make any representations or warranties on
behalf of Sharp. Specically, SHARP DOES NOT EXTEND TO YOU, THE END-USER, ANY
EXPRESS WARRANTY OR ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR USE OR FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE
HARDWARE, SOFTWARE OR FIRMWARE EMBODIED IN, OR USED IN CONJUNCTION
WITH THIS PRODUCT. Sharp is not responsible for any damages or loss, either direct,
incidental or consequential, which you, the end-user, may experience as a result of your
purchase or use of the hardware, software or rmware embodied in or used in conjunction
with this Product. Your sole remedy, in the event that you encounter any difculties with this
Product, is against the authorized dealer from which you purchased the Product.
MX-6240N/MX-7040N Digital Full color Multifunctional System
In the event that this authorized dealer does not honor its warranty commitments, please
contact the General Manager, Business Products Group, Sharp Electronics Corporation,
1 Sharp Plaza, Mahwah, NJ 07495-1163, so that Sharp can try to help assure complete
satisfaction of all the warranty rights to which you are entitled from the authorized dealer.
AVIS POUR NOS UTILISATEURS AU CANADA
AVIS : Le présent matériel est conforme aux spécications techniques applicables d’Industrie
Canada.
Remarque : L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal
de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une
interface peut consister en une combinaison quelconque de dispositifs, à la seule condition
que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
L’indice d’équivalence de la sonnerie (IES) de cet équipement est indiqué sur le kit d’extension
télécopieur.
Sharp Electronics of Canada Ltd.
335 Britannia Road East,
Mississauga, Ontario, L4Z 1W9
Canada
NOTICE for users in the USA
BEFORE FIRST USE
4
Each instruction also covers the optional units used with these products.
Caution!
For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
FAX interface cable and Line cable
These special accessories must be used with the device.
To reduce the risk of re, use only UL-Listed No.26 AWG or larger telecommunication line cord.
FOR YOUR RECORDS ...
To protect against loss or theft, record and retain for reference the machine’s serial number located at the lower left corner of the left side of the machine.
Model Number
Serial Number
Date of Purchase
Place of Purchase
Authorized Sharp Printer
Service Department Number
Notice for Users in U.S.A.
EMC (this machine and peripheral devices)
WARNING:
FCC Regulations state that any unauthorized changes or modications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate
this equipment.
Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
BEFORE FIRST USE
5
This machine contains the software having modules developed by Independent JPEG
Group.
This product includes Adobe® Flash® technology of Adobe Systems Incorporated.
Copyright© 1995-2007 Adobe Macromedia Software LLC. All rights reserved.
SOFTWARE LICENSE
The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all or any portion of the software on the CD-ROM or in the machine, you are
agreeing to be bound by the terms of the SOFTWARE LICENSE.
The explanations in this manual are based on American English and the North American version of the software.
Software for other countries and regions may vary slightly from the North American version.
• The explanations in this manual assume that you have a working knowledge of your Windows or Macintosh computer.
• For information on your operating system, please refer to your operating system manual or the online Help function.
• The explanations of screens and procedures in this manual are primarily for Windows Vista® in Windows® environments. The screens may vary depending on the version of the
operating system.
• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please contact your dealer or nearest SHARP Service
Department.
• This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem is discovered, please contact your dealer or nearest
SHARP Service Department.
• Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product
and its options, or other failures, or for any damage that occurs due to use of the product.
Products that have earned the ENERGY STAR® are designed to
protect the environment through superior energy efciency.
Warranty
While every effort has been made to make this document as accurate and helpful
as possible, SHARP Corporation makes no warranty of any kind with regard to its
content. All information included herein is subject to change without notice. SHARP is
not responsible for any loss or damages, direct or indirect, arising from or related to
the use of this operation manual.
© Copyright SHARP Corporation 2012. All rights reserved. Reproduction, adaptation
or translation without prior written permission is prohibited, except as allowed under
copyright laws.
BEFORE FIRST USE
6
Quick Start Guide (this document)
Features important safety notes, names of parts
and components, information about the power-on
procedure, operation overviews, information for people
who manage the machine, and information about other
aspects of this machine.
Read this section before using the machine for the rst
time.
ダミー
Software Setup Guide (CD-PDF)
Explains how to install the various drivers needed
when using this machine as a printer, network scanner,
or fax machine. Refer to this document when using this
machine from a computer. The Software Setup Guide
can be found on the “Software CD-ROM”.
User's Manual (PC)
Can be downloaded from the machine to a computer
and viewed. Refer to this document to learn more
about printer mode and settings mode, and to learn
about the details of each type of mode. ダミー
Operation Guide (Built-in)
Can be viewed by touching the operation guide icon
on the machine’s touch panel. When you are using
this machine, use this document to see an overview
of a particular mode or when you are having trouble
operating the machine.
ダミー
OPERATION MANUALS AND HOW TO USE THEM
OPERATION MANUALS AND HOW TO USE THEM
1Conrm the machine’s IP address
First, tap the [Settings] key on the home screen, and then tap [System Settings] → [List
Print (User)] in the left menu.
Next, tap the [Print] key in the [All Custom Setting List], and conrm the IP address in
the printed list.
2Insert the machine’s IP address into the
address bar of your web browser to access
the machine.
http://machine’s IP address/
User verication may be required depending on the
machine’s settings.
Please check with the machine’s administrator
to obtain the account information necessary for
verication.
3Download the [User's Manual]
Click [Operation Guide Download] on the displayed page. Next, select the desired
language from the “Language to download” list, and then click the [Download] button.
4Double-click on the downloaded le to display the User's Manual.
Downloading the User's Manual
You can download the [User's Manual] by following the procedures below while the machine is connected to the network.
7
Symbols in this manual
To ensure safe use of the machine, this manual uses various safety symbols. The safety
symbols are classied as explained below. Be sure you understand the meaning of the
symbols when reading the manual.
WARNING CAUTION
Indicates a risk of death or serious injury. Indicates a risk of human injury or property
damage.
CAUTIONS
If you notice smoke, a strange odor, or other abnormality, do not use the machine.
If used in this condition, re or electrical shock may result.
Immediately switch off the main power and remove the power plug from the power
outlet.
Contact your dealer or nearest SHARP Service Department.
Do not use a ammable spray to clean the machine.
If gas from the spray comes in contact with hot electrical components or the fusing unit
inside the machine, re or electrical shock may result.
Do not make any modications to this machine.
Doing so may result in personal injury or damage to the machine.
Do not remove the machine casing.
High-voltage parts inside the machine may cause electrical shock.
Do not place a container of water or other liquid, or a metal object that might fall
inside, on the machine.
If the liquid spills or the object falls into the machine, re or electrical shock may result.
If a thunder storm begins, switch off the main power and remove the power plug
from the outlet to prevent electrical shock and re due to lightning.
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a
location that will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk
of re.
The fusing unit and paper exit area are hot. When removing a
misfeed, do not touch the fusing unit and paper exit area. Take
care not to burn yourself.
When loading paper, removing a misfeed, performing
maintenance, closing the front and side covers, and
inserting and removing trays, take care that your ngers
are not pinched.
WARNING
CAUTIONS
Handling precautions
Meaning of the symbols
CAUTION!
HOT
PINCH POINT
KEEP CLEAR
PROHIBITED
ACTIONS
DO NOT
DISASSEMBLE
MANDATORY
ACTIONS
The machine includes the document ling function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a
hard drive failure occurs, it will no longer be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of
important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.
8
Wave length 790 nm ± 10 nm
Pulse times
MX-6240N/MX-7040N
Normal paper mode (P/S = 178 mm/s) = (3.49 µs ± 0.02 ns) / 7 mm
MX-6240N/MX-7040N
Normal paper mode (P/S = 225 mm/s) = (2.76 µs ± 0.02 ns) / 7 mm
Heavy paper mode (P/S = 95 mm/s) = (3.27 µs ± 0.02 ns) / 7 mm
Output power Max 0.672 mW (LD1 + LD2)
Caution
Use of controls or adjustments or performance of procedures other than those
specied herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)
SAFETY PRECAUTIONS
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and
1040.11 of the CDRH standards. This means that the equipment does not produce
hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The equipment’s exterior covers contain several safety interlock switches. Do not bypass any
safety interlock by inserting wedges or other items into switch slots.
“BATTERY DISPOSAL”
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP
BATTERY THAT MUST BE DISPOSED OF PROPERLY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED
SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS
BATTERY.
This product utilizes a CR coin Lithium battery which contains a Perchlorate
material. Special handling for this material may apply, California residents,
See www.dtsc.ca.gov/hazardouswaste/perchlorate/
Others, consult local environmental ofcers.
This product utilizes tin-lead solder, and uorescent lamp containing a small
amount of mercury. Disposal of these materials may be regulated due to
environmental consideration. For disposal or recycling information, please
contact your local authorities, the Electronics Industries Alliance: www.eiae.org,
the lamp recycling organization: www.lamprecycle.org or Sharp at 1-800-BE-
SHARP. (For U.S.A. Only)
Laser information
CAUTIONS
9
Do not install the machine in a location with poor air circulation.
A small amount of ozone is created inside the machine during printing. The amount
of ozone created is not sufcient to be harmful; however, an unpleasant odor may be
noticed during large copy runs, and thus the machine should be installed in a room
with a ventilation fan or windows that provide sufcient air circulation. (The odor may
occasionally cause headaches.)
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output may result.
Locations with ammonia gas
Installing the machine next to a diazo copy machine may cause dirty output.
Locations subject to vibration.
Vibration may cause failure.
WARNING
Do not install the machine on an unstable or slanted surface. Install the machine
on a surface that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
Be sure to connect the power cord only to a power outlet that meets the specied
voltage and current requirements. Also make certain the outlet is properly
grounded. Do not use an extension cord or adapter to connect other devices
to the power outlet used by the machine. Using an improper power supply may
cause re or electrical shock.
* For the power supply requirements, see the name plate in the lower left corner of the
left side of the machine.
Near a wall
Be sure to leave the clearances shown right between the unit
and the nearest wall or other surface.
For easy maintenance, you should also leave the clearances
shown right around the unit.
Locations that are excessively hot, cold, humid, or dry. (near heaters, humidiers,
air conditioners, etc.)
The paper will become damp and condensation may form inside the machine, causing
misfeeds and dirty output.
30cm
30cm 45cm
Installation notes
CAUTION
The machine includes a built-in hard drive. Do not subject the machine to shock or
vibration. In particular, never move the machine while the power is on.
• The machine should be installed near an accessible power outlet for easy connection.
• Connect the machine to a power outlet which is not used for other electric appliances. If a lighting
xture is connected to the same outlet, the light may icker.
CAUTIONS
10
Do not throw a toner cartridge into a fire.
Toner may y and cause burns.
WARNING
About consumables
Store a toner cartridge out of the reach of children.
Do not insert or remove the power plug with wet hands.
This may cause electrical shock.
When removing the power plug from the outlet, do not pull
on the cord.
Pulling on the cord may cause damage such as wire exposure
and breakage, and may result in re or electrical shock.
If you will not use the machine for a long time, be sure to remove the power plug
from the outlet for safety.
Be sure to connect the power cord only to a power outlet that meets the specied
voltage and current requirements.
Also make certain the outlet is properly grounded. Do not use an extension cord or
adapter to connect other devices to the power outlet used by the machine. Using an
improper power supply may cause re or electrical shock.
* For the power supply requirements, see the name plate in the lower left corner of the
left side of the machine.
WARNING
Power notes
CAUTIONS
Other manuals for MX-6240N
5
This manual suits for next models
1
Table of contents
Other Sharp All In One Printer manuals
Sharp
Sharp AR-M150 Online User manual
Sharp
Sharp MX-B201D User manual
Sharp
Sharp MX-M503N User manual
Sharp
Sharp MX-B467F User manual
Sharp
Sharp MX-5112N User manual
Sharp
Sharp AR-M236 User manual
Sharp
Sharp MX-4110N User manual
Sharp
Sharp AL-1035-WH A User manual
Sharp
Sharp AR-168N User manual
Sharp
Sharp AL-1651CS User manual
