Sharp FO-2150CM User manual
SETUP GUIDE
SHARP COLOR MFP
MODEL
FO-2150CM
1. Unpacking Checklist
Before setting up,
make sure you
have all of the
following items.
If any are
missing, contact
your dealer or
retailer.
Handset Handset
lead
Telephone
line cord
Rapid key
labels
Setup Guide
Paper
cover
Paper tray
Color and black
print cartridges
(one each)
Quick
Reference
Guide
Sharp Color
MFP CD-ROM
Document
tray
Adapter
(for Australia)
Adapter
(for New Zealand)
Business
products dealer
installation
report
1
2. Trays
Attach the document tray.
Insert the paper tray into the back of the machine as shown.
Pull out the original document support and the output tray.
Note: When receiving faxes, copying or printing, do not
letalargenumberofpagesaccumulateintheoutputtray.
This may obstruct the outlet and cause paper jams.
2
3. Connections
Handset
Connect the handset as shown and place it on the handset rest.
♦The ends of the handset lead are identical, so they will go into
either socket.
Make sure the
handset cord goes
into the unmarked
socket on the side
of the machine!
Use the handset to
make ordinary phone
calls, or to transmit
and receive
documents manually.
3
Parallel cable
Connect the Sharp Color MFP to your computer with a parallel cable.
♦If you do not have a parallel cable, you can purchase one from
your dealer or any computer store.
♦Make sure the cable is IEEE 1284-compliant. We recommend a
shielded cable no longer than 2 meters.
1
Make sure your computer is turned off
and the Sharp Color MFP is
unplugged.
2
Connect one end of the cable to the
port on the Sharp Color MFP. Snap
the clips on each side of the port onto
the cable connector to secure it.
3
Connect the other end of the cable to
the parallel port on the back of your
computer.
Note: The parallel port mode of your computer must be set to Nibble mode
or an equivalent mode such as Compatible, PS/2, Standard, Normal or Tra-
ditional mode. Note that ECP, EPP, Byte, and Bidirectional modes may not
allow correct operation. To check or change the parallel port mode, run
your computer’s setup (BIOS) program after powering on your computer.
(Refer to your computer documentation for more information).
Connections
4
Power lead
Plug the power lead into a 230-240 V, 50 Hz, earthed (3-prong) AC
outlet.
♦Caution: When disconnecting the fax, unplug the telephone line
cord before unplugging the power lead.
♦Caution: The mains outlet (socket outlet) should be installed near
the equipment and be easily accessable.
The machine does not
have a power on/off switch,
so the power is turned on
and off by simply plugging
or unplugging the power
lead.
Note: If your area experiences a high incidence of lightning or
power surges, we recommend that you install surge protectors for the
power and telephone lines. Surge protectors can be purchased at
most telephone specialty stores.
Moving your fax and reconnecting
Should it be necessary to move your fax to a new location, first
disconnect the telephone line cord before disconnecting the power
lead. When reconnecting, it is necessary to connect the power lead
before connecting the telephone line cord.
Connections
5
Telephone line cord
Insert one end of the telephone line cord into the adapter. Insert the
other end of the line cord into the socket on the back of the fax marked
TEL. LINE. Plug the adapter into the telephone socket on the wall.
For Australia
For New Zealand
Be sure to insert the
telephone line cord into
the TEL. LINE socket.
Do not insert it into
the TEL. SET socket.
Note: The Sharp MFP is set for tone dialling. If you are on a pulse
dial line, you must set the Sharp MFP for pulse dialling. Press the
following keys on the operation panel:
Press until
display
shows: DIAL MODE
TONE PULSE
or PSEUDO RING DUR.
Connections
6
Extension phone (optional)
If desired, you can connect an extension phone to the TEL. SET
socket on the fax.
♦To connect an answering machine to the Sharp Color MFP, see
Answering Machine Connection in Chapter 7 of your online
Operation Guide.
1
Remove the seal covering the TEL.
SET socket.
2
Connect the extension phone line to
the TEL. SET socket .
Important: In New Zealand, not all standard telephones and
answering machines will respond to incoming ringing when connected
to the extension socket of the equipment.
Connections
7
4. Installing a Print Cartridge
Your Sharp Color MFP
uses either a FO-25CC
color print cartridge or a
FO-21BC black print
cartridge.
We recommend that you
keep a black cartridge
installed for normal use,
and change to a color
cartridge only when you
need to print a color job.
Note:If you receive a fax when a color print cartridge is installed,
the fax will be held in memory and printed out when a black
cartridge is installed.
CARTRIDGE key
1
Press the CARTRIDGE key.
•• The cartridge carrier will move to the centre of the print
compartment.
8
2
Open the front cover of the Sharp Color MFP.
Note on changing cartridges:
When you need to change a print
cartridge, remove the currently
installed cartridge after Step 2 above.
Remove the cartridge by pulling the
knob on the cartridge toward you until
you hear a click.
If the cartridge is still useable, insert it
into the cartridge holder on the back of
the machine. Push back on the
cartridge until it snaps into place.
•• To prevent the used print cartridge
from drying out, be sure to store it
in the cartridge holder.
3
Remove the new print cartridge from its packaging.
Installing a Print Cartridge
9
Other manuals for FO-2150CM
1
Table of contents
Other Sharp All In One Printer manuals
Sharp
Sharp TINSE2026QSZZ User manual
Sharp
Sharp MX-M753 User manual
Sharp
Sharp MX-B401 User manual
Sharp
Sharp UX-5000 User manual
Sharp
Sharp MX-C381 User manual
Sharp
Sharp MX-5141N Installation guide
Sharp
Sharp MX-2314N User manual
Sharp
Sharp AM-400 User manual
Sharp
Sharp AL-2030 User manual
Sharp
Sharp FO-2081 Guide
Sharp
Sharp AL-1045 Setup guide
Sharp
Sharp MX-C312 User manual
Sharp
Sharp AR-5516S User manual
Sharp
Sharp MX-M260 User manual
Sharp
Sharp MX-4100N User manual
Sharp
Sharp MX-B355W User manual
Sharp
Sharp MX-2610N User manual
Sharp
Sharp MX-C380P User manual
Sharp
Sharp MX-C358F User manual
Sharp
Sharp MX-2310U Guide
