Sharkk Boombox User manual
Bluetooth Portable Boombox
Owner’s Guide
www.Sharkk.com
2
I
Thank you for your purchase of the SHARKK Bluetooth 4.0 Box Speaker. Please
take the time to read this manual carefully before you begin using your new
device.
Prepare to raise the roof with your new powerful 10W SHARKK Speaker. With
the rechargeable, high capacity 2500 mAh polymer Li-ion battery, you can
rock out with up to 10 hours consecutive playing time! Need to make a call, no
problem! The built in HQ Mic allows you to easily make and receive calls right
from your speaker! Among the supported media connections are: AUX Cable,
Bluetooth 4.0 and NFC, with “siri” function.
3
I
In addition to the Bluetooth 4.0 Speaker, the SHARKK Lifestyle Brand is
pleased to be able to oer a wide range of consumer accessories across many
dierent product categories. Keyboards, Tablet and Phone Cases, Speakers and
Wallets are but a few of the items that make up our extensive online catalog.
Here at SHARKK, the quality of our products and the satisfaction of our
customers are the two greatest passions of our enterprise, as we endeavor to
bring you top quality items at competitive prices.
4
G S
Box Content
•1x Bluetooth Speaker
•1x USB Charging Cable
•1x 3.5mm Audio Cable
•1x Power Adapter
•1x User Manual
5
I
2
1
76 8 9 10 11 12
3
4
5
6
G S
Power Indicator
•Blue: device is turned on.
•Red: device is charging (will go dark when fully charged).
•Flashing Blue and Red: indicates active Bluetooth pairing.
Power Button
•Press and hold to turn device on/o. You will hear a beep-like sound when
powering on and the power indicator will turn blue. The light behind this
button will turn green while speaker is in AUX mode.
Headphone Jack
•Press and hold M button to switch between headphone/AUX mode.
1
2
3
7
G S
AUX in port
•Here you can connect your speaker to external media devices.
Micro USB Jack
•This port cannot be used for external device connection, for charging use only.
M(ode) Button
•Use this button to toggle between Bluetooth/AUX modes.
•When using wired connection for multiple speakers, press and hold this
button to synchronize sound.
Note: When playing music from a Bluetooth device, the Bluetooth mode is always given priority.
Prev/Next
Use this button to navigate between tracks when Bluetooth device is connected.
5
6
7
4
8
G S
Play/Pause
•While in Bluetooth mode, press and hold to initiate Bluetooth pairing, then
continue to use normally for playing and pausing.
V-/V+
•Adjusts volume. While in Bluetooth mode, a beeping sound will alert you
when you have reached maximum volume.
Phone Button
•When connected via Bluetooth, press and hold to activate “Siri” or Android
Voice.
•Press twice to redial.
•Incoming Call: press once to answer, press and hold to reject/end call.
8
9
10
9
G S
NFC Area
•Hold your device over this area to use NFC for Bluetooth connection.
MIC
•For best results, keep within 3 feet of the mic while speaking.
Charging
1. To charge your device, firmly connect the supplied adapter to the USB port
on the side of the device.
2. Charging begins automatically regardless of whether the device is powered
on/o.
3. The indicator light will show red while charging and will go dark once the
charge is complete.
11
12
10
G S
Bluetooth
1. To connect your speaker to a Bluetooth enabled device, hold your phone or
other device within 3 feet of your speaker, press and hold the Play/Pause
button for 3 seconds, and the system will then enter pairing mode and you
should see the indicator light flashing blue and red.
2. Pairing mode will automatically be canceled (signaled by a beep) after 3
minutes. To reenter pairing mode, simply begin again at step #1.
3. Make sure that Bluetooth is enabled on the device you wish to pair with the
speaker.
4. When scanning for available devices, the speaker should appear as
“SHARKK” on the list of found devices.
Other manuals for Boombox
1
Table of contents
Other Sharkk Speakers manuals
