Digital Weighing Indicator
SI 4200
2. INTRODUCTION
2-1. Introduction
Thank you for purchasing, this “SI 4200” Industrial Digital Weighing Controller.
This “SI 4200” model is advanced model for “Quantity Control application”, with 2ports serial port
interfaces and precise weighing control system, you can upgrade your weighing process.
This “SI 4200” Weighing Controller is suitable for any kinds of Weight Capacity with Counting by “Unit
Weight Calibration”.
Enjoy your process with “SI 4200” Weighing Controller.
2-2. Cautions
1) Don’t drop on the ground or avoid serious external damage on item.
2) Don’t install under sunshine or heavy vibrated condition.
3) Don’t install place where high voltage or heavy electric noise condition.
4) When you connect with other devices, please turn off the power of item.
5) Avoid from water damage.
6) For the improvement of function or performance, we can change item specification without prior notice
or permission.
7) Item’s performance will be up-dated continuously base on previous version’s performance.
2-3. Features
1) All Modules and Option Cards are isolated to maximize accuracy and performance.
2) External input terminal inside.(4pcs:Can be set by F11 mode)
3) By using “Photo-Coupler” on each module(Option, Analog board, In/Out), we improved “Impedance
problem”, “Isolation ability among inputs”, “Leading power problem”, and “Noise covering function”.
4) Data back-up function, when the sudden power off.
5) “Set value Error”check function added. –Check “Set values for each weighing mode”.
- If there is any wrong set value, “E” will be display and will not start weighing process
6) Polycarbonate film panel, strong for dust and water.
7) Weight Unit selection Function added. (“g”, “kg”, “t” selectable – F40)
8) Variable options(Order in advance, Refer Chapter 6. Interface) –“RS-232C” Standard installed.
9)2port Serial Interface available –various applications are available.
10) Simulation Calibrate mode added (Can calibrate without Test weight)
