SereneLife PICKIT21RD.5 User manual
PortableInstantPhotoPrinter
PICKIT21RD.5
Wireless Digital Picture Printing for iPhone
orAndroid Smartphone Camera
Step 1 Before Start
www.SereneLifeHome.com2
IN/OUT
Follow the arrow to insert the cartridge
Step 2 App Installation
1. Android Device
A TYPE *NFC Support Android Device ONLY
1. Turn NFC on in your smart phone.
2. Tap the phone on the top of Pickit printer.
Google Play Store app installation page will show up.
3. Install the app into your smartphone from the store.
B TYPE
1. Go to Google Play Store in your smartphone.
2. Search "Pickit Printer"
3. Install "Pickit Printer'' into your smartphone.
www.SereneLifeHome.com 3
A TYPE
Step 2 App Installation
2.Apple Device
1. Go to Appstore in your iPhone, iPod touch or iPad.
2. Search "Pickit Printer"
3. Install "Pickit Printer" Application into your device.
www.SereneLifeHome.com4
B TYPE
Step 3 Connecting
1. WiFi Access Point (AP) "Apple and Android Devices.
a. Turn WiFi on in your smartphone.
b. Go to WiFi setting and nd "Direct-Cube-XXXX".
• Printer names ara vary and 4 digits. The 4 digits are combination at number
and alphabet.
c. Password is "12345678".
d. Select the WiFi network to connect the printer.
2. NFC and WiFiDirect *NFC.WiFi Direct eupport devices ONLY
a. Turn NFC and WiFi on in your smartphone.
• Set the NFC setting as P2P mode.
b. Tap your device on the center of the printer where the NFC mark is.
c. Within 20 seconds,the app will automatically connect to WiFi Direct
d. When the printer is connected to WiFiDirect, green mark will be shown in the
app.
www.SereneLifeHome.com 5
Step 3 Connecting
1. WiFi Access Point (AP) "Apple and Android Devices.
a. Turn WiFi on in your smartphone.
b. Go to WiFi setting and nd "Direct-Cube-XXXX".
• Printer names ara vary and 4 digits. The 4 digits are combination at number
and alphabet.
c. Password is "12345678".
d. Select the WiFi network to connect the printer.
2. NFC and WiFiDirect *NFC.WiFi Direct eupport devices ONLY
a. Turn NFC and WiFi on in your smartphone.
• Set the NFC setting as P2P mode.
b. Tap your device on the center of the printer where the NFC mark is.
c. Within 20 seconds,the app will automatically connect to WiFi Direct
d. When the printer is connected to WiFiDirect, green mark will be shown in the
app.
Step 4 Printing in the APP
www.SereneLifeHome.com6
App Launch Select Choose Photo Choose Photo
Select Print Select Printer Printing
*In case of multiple printers are available
Step 5 LED Indicator
Battery Status
Troubleshooting
www.SereneLifeHome.com 7
Step 6 Note & FCC
NOTE
• Photo Paper will go in and out 4 times (YMCO, Yellow, Magenta, Cyan, Overcoating).
Do NOT touch the paper during printing process for best image quality.
• Do not pull paper out by force during printing.
• Do not place an object in front of the paper exit slot.
• Use the latest Pickit application for best print quality. Check the latest app
version from Google Play Store and Apple Appstore.
• Printer has Built-in Battery. Charge the printer before using.
• Handle with care during charging to prevent electric shock.
• Do not disassemble or deform.
• Avoid too high or low temperature or humidity.
• If NFC tag is not read, check its position on the printer and smartphone.
Then try again.
• The higher resolution the image has, the higher quality the printed photo has.
Recommended image size is 1280 * 2448 pixel.
• Operating Temperature: 0-40°C (32-104°F)
FCC (Federal Communications Commission)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmfulinterference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution:
Any changes or modications to the equipment not expressly approved by the
party responsible for compliance could void user's authority to operate the
equipment.
This device (FCCID: PO5M1) complies with FCC SAR requirement.
www.SereneLifeHome.com8
Features:
• Snap Pics and Wirelessly Print 3.5" x 2" High Quality 291dpi Color Photos On the
Go from your Apple or Android Smartphone.
• Don't Miss Another Moment of Inspiration! Compact Portable Design Makes
Mobile Printing Easy and Instant on Any Adventure or Travel
• Don't Fuss with Ink or Paper Easy Change 10 Piece Cartridges are Self Contained
Preventing Unwanted Fingerprints and Hassles with Cleaning/Maintenance
• Use the App to Make Quick Edits and Adjustments Adjust Color, Add Filters,
Select Portrait or Landscape and Set the Image Borders
• D2T2 Technology means Images Have No Lines and Excellent Color Reproduction
Prints Have no Unsightly White Borders
Technical Specs:
• App Name: “PicKit”
• Support: IOS/Android
• Photo Size: 2.1”x 3.4”
• Files Supported: JPEG, PNG
• Photo Size: 2.1”x 3.4”
• Dimensions: 6.2” x 3.2” x 1”
• Cartridge Type: PRTPICKET22
• Printing Conditions: 50 - 95 degrees F - Under 70% RH
• Wireless: WiFi (IEEE 802.11 b/g/n)/WiFi Direct/NFC
• Charger Power: DC 5V/ 1 A
www.SereneLifeHome.com 9
Table of contents
Other SereneLife Printer manuals
