Sensaphone FGD-0108 User manual

FGD-0108

Temperature and Humidity Sensor

Quick Installation Guide

Informational Reference for Authorized Installers and Fitters

1. Overview

FGD-0108 temperature and humidity sensor is compact and user friendly. It measures and

displays both ambient temperature and relative humidity at the same time.

Page 1

Main Features:

1. 12V DC (5-15V DC) Main Power Input

2. Temperature Sensing Range: -20℃–70℃ (-4℉–158℉) (Accuracy: ± 0.5℃ at 25℃)

3. Humidity Sensing Range: 0 –100% RH (Accuracy: ± 5% RH at 25℃)

4. Temperature Display Unit: Degree Celsius or Degree Fahrenheit

5. Normally Open (NO) Solid State Output

6. Dimension: 80 x 80 x 28mm

7. Weight: 220g

8. Material: ABS

2. Wiring Connection

Page 2

1 2

5 6

1: 12V DC+

2: GND

3: Temperature NO

4: Temperature COM

5: Humidity NO

6: Humidity COM

Page 3

3.1 Configure High / Low Temperature Limit

1. Press and hold for 3 seconds

3. Press to save, press to go to next page

ENTER MENU

5. Press to save, press to go to next page

ENTER MENU

7. Press to save, press for 5 times to exit

ENTER MENU

2. Use and to set high temperature limit Set 35℃

4. Use and to set low temperature limit Set 15℃

6. Use and to set temperature hysteresis width Set 0.5℃

3.2 Configure High / Low Humidity Limit

1. Press and hold for 3 seconds and then press for 3 times

3. Press to save, press to go to next page

ENTER MENU

5. Press to save, press to go to next page

ENTER MENU

7. Press to save, press twice to exit

ENTER MENU

2. Use and to set high humidity limit Set HI

80%

4. Use and to set low humidity limit Set Lo

30%

6. Use and to set humidity hysteresis width Set dL

3.3 Reset to Factory Default

1. Press and hold for 3 seconds and then press for 6 times

3. Press to exit

2. Press to restore to factory default

ENTER

dEFt

Page 4

3.4 Configure Temperature Display Unit ℃ / ℉

3. Press to save, press for 3 times to exit

ENTER MENU

1. Press and hold for 3 secondsand ENTER

2. Press for Degree C / for Degree F Set ℃Set ℉

3.5 Configure Humidity Display RH.

3. Press to save, press twice to exit

ENTER MENU

2. Press for no RH display /for RH display Set

Set

1. Press and hold for 3 seconds and then pressand ENTER MENU

ENTER

3.6 Temperature and Humidity Offset Value Setting

4. Press to save, press to go to next page

ENTER MENU

6. Press to save, press to exit

ENTER MENU

1. Press and hold for 3 secondsand ENTERMENU

2. Use and to input password: 11 and then press PS

3. Use and to input temperature offset value ERR 0.0℃

SET

5. Use and to input humidity offset value ERR RH

SET 0.0 %

Table of contents

Other Sensaphone Temperature Controllers manuals

Sensaphone

Sensaphone FGD-0109 User manual

Popular Temperature Controllers manuals by other brands

Swegon

Swegon LUNAd MB Instructions for use

Lucky Reptile

Lucky Reptile Thermo Control II Operation instructions

SENSORMETRIX

SENSORMETRIX Argon 100 manual

Fuji Electric

Fuji Electric PXE4 instruction manual

Yuyao gongyi

Yuyao gongyi XMT-808 series Operation manual

Selec

Selec TC544C user guide

P.W. KEY

P.W. KEY rt-208gt operating manual

Future Design

Future Design FDC-9200 user manual

BH Thermal

BH Thermal BriskONE owner's manual

Omron

Omron E5EX-H manual

West Control Solutions

West Control Solutions KS 45 Operation Notes

MCS

MCS RITC-15B Operator's manual

SMC Networks

SMC Networks Thermo-con INR-244-639 Operation manual

eltherm

eltherm Ex-TC It Series operating instructions

Omron

Omron C200H-TV Series Operation manual

industrie technik

industrie technik CA1 instructions

KRAL

KRAL EET 32 operating instructions

dixell

dixell XR420C Installing and operating instructions