Sennheiser AC 3000 User manual
8
Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones para el uso
Gebruiksaanwijzing
AC 3000
Active Transmitter Combiner 8:1
AC3000_093908_0406_Sp6.book Seite 1 Donnerstag, 6. April 2006 1:59 13
AC3000_093908_0406_Sp6.book Seite 2 Donnerstag, 6. April 2006 1:59 13
1
8
Instructions for use
AC 3000
Active Transmitter Combiner 8:1
AC3000_093908_0406_Sp6.book Seite 1 Donnerstag, 6. April 2006 1:59 13
2
Contents
Brief description .................................................................... 2
Safety instructions ............................................................... 2
Delivery includes ................................................................... 4
Operating elements .............................................................. 4
Connection diagram ............................................................. 5
Putting the unit into operation .......................................... 5
Operation ................................................................................ 7
Troubleshooting .................................................................... 7
Accessories ............................................................................. 8
Specifications ......................................................................... 8
Manufacturer declarations .................................................. 9
Brief description
With the AC 3000 8-to-1 active transmitter combiner, the signals
of up to eight SR 3054 transmitters or up to four SR 3056 twin
transmitters can be combined onto a single antenna (A 2003 UHF
directional antenna or A 1031 U omni-directional antenna).
The active transmitter combiner allows you to make high-
quality transmission systems with up to 8 channels.
Areas of application:
y
Multi-channel in-ear monitoring system for broadcast or stage use
y
Multi-channel system suitable for any application where talk-back
signals are to be transmitted (e.g. studio)
Safety instructions
Danger!
Overheating or overvoltages (caused by lightning striking the
mains supply etc.) can cause units with a mains connection to
catch fire!
Always set up the unit in a well-ventilated place! Make sure that
the air vents of the unit are not covered or blocked! Never stack
more than two units directly one above the other! Do not set up
the unit near any heat sources and never expose the unit to
AC3000_093908_0406_Sp6.book Seite 2 Donnerstag, 6. April 2006 1:59 13
3
direct sunlight (see page 15)! Use an overvoltage protection
or, during a thunderstorm, disconnect the unit from the mains!
Warning!
If you open units or use damaged mains cables, you can
receive a dangerous electric shock!
Never open the unit and only use undamaged mains cables!
If a unit should be defective, repair must be carried out by
authorized personnel! If units are opened by you in breach
of this instruction, the warranty becomes null and void.
Warning!
If units and cables are set up improperly, persons can be
injured or units can be damaged!
Set up the unit on an even surface or mount it into a rack!
Lay the cables in such a way that no-one can stumble over
them!
Attention!
If liquids or small parts which conduct electricity find their
way into the interior or to the sockets of the unit, this can
cause a short-circuit which may damage the unit!
Keep liquids and small parts which conduct electricity away
from the unit! Use a damp cloth for cleaning the unit. Do not
use any solvents or cleansing agents!
Attention!
The AC 3000 contains mechanically moving parts (fans).
Since dust and pollution can impair their function, you should
regularly check the fans for proper operation and clean out
any dust if necessary. The failure of one or several fans can
cause overheating and permanent damage to the unit.
AC3000_093908_0406_Sp6.book Seite 3 Donnerstag, 6. April 2006 1:59 13
4
Delivery includes
y1 active transmitter combiner 8:1
y1 mains cable
y1 rack-mounting kit
y4 set of self-adhesive plastic feet
y1 instruction manual
You additionally require BNC cables for connecting the
transmitters and the antenna to the AC 3000, an antenna
(A 2003 UHF passive directional antenna or A 1031 U pas-
sive omni-directional antenna) and up to eight SR 3054
transmitters or up to four SR 3056 twin transmitters.
Unused inputs do not require a terminating resistor.
Operating elements
POWER LED
POWER (ON/OFF) switch
8 RF inputs RF IN 1 to RF IN 8 for connecting the
transmitters
3 low-noise fans
BNC socket for antenna output ANT
IEC mains socket
8 LEDs for RF signal indication
8
AC3000_093908_0406_Sp6.book Seite 4 Donnerstag, 6. April 2006 1:59 13
5
Connection diagram
The below connection diagram shows the connections for
an 8-channel system.
Putting the unit into operation
Setting up the unit
왘Set up the AC 3000 on an even, horizontal surface so that
it cannot fall over or mount it into a 19" rack.
Warning!
During operation, the AC 3000 and the connected
transmitters produce considerable waste heat! Make
sure that the air vents of the units are not covered or
blocked and provide for a duct of sufficient size to ensure
a free air flow between the units – especially when
mounting several transmitter combiners or transmitters
into a desk, chassis or rack! Never stack more than two
units directly one above the other!
ANT
8:1
AC3000_093908_0406_Sp6.book Seite 5 Donnerstag, 6. April 2006 1:59 13
6
Connecting the antenna
The AC 3000 active transmitter combiner can be used with
either the A 2003 UHF directional antenna or the A 1031 U
omni-directional antenna. The antenna transmits the sig-
nals of all connected transmitters. The signals are combined
onto the antenna output with no distribution attenuation.
왘Connect the antenna to the antenna output ANT .
Note:
Each AC 3000 requires its own antenna! Several
AC 3000s cannot be daisy-chained!
Connecting the transmitters
You can connect up to eight SR 3054 transmitters or up to
four SR 3056 twin transmitters to the AC 3000.
왘Use 50-Ohm BNC cables to connect the transmitters to
the RF inputs RF IN 1 to RF IN 8 .
Connecting the mains cable
왘Connect the mains cable to the IEC mains socket and
to the mains.
Note:
The AC 3000 can be connected to any mains power
supply with 100 V to 240 V AC (50 to 60 Hz).
8
AC3000_093908_0406_Sp6.book Seite 6 Donnerstag, 6. April 2006 1:59 13
7
Operation
Turning the AC 3000 on and off
왘To turn the AC 3000 on, press the POWER (ON/OFF)
switch .
The POWER LED lights up red.
왘To turn the AC 3000 off, press the POWER (ON/OFF)
switch once more. The POWER LED goes off.
RF signal indication
왘The AC 3000 features eight control LEDs which will
light up if an input signal is present at the corresponding
input.
Troubleshooting
One or several LEDs for input signal indication do not
light up
왘Check if transmitters are connected to the corresponding
inputs.
왘Check if the corresponding transmitters are turned on.
Disturbed reception or no reception
Possible causes:
yTransmitting antennas are not within the reception area
yTransmitters or receivers are not turned on
yBatteries are not inserted into the receiver or batteries
are low
yThe antennas are not connected correctly
yThe connecting cables are defective
yToo high cable attenuation due to too long antenna
cables or wrong type of antenna cable
yThe selected transmission and receiving frequencies are
not within the frequency window
yThe frequencies are not intermodulation-free
AC3000_093908_0406_Sp6.book Seite 7 Donnerstag, 6. April 2006 1:59 13
8
Accessories
The following accessories are available from Sennheiser:
A 2003 UHF Passive directional antenna Cat. No. 03658
A 1031 U Passive omni-directional antenna
Cat. No. 04645
GZL 1019 A1 BNC-BNC coaxial cable, length 1 m
Cat. No. 02324
GZL 1019 A5 BNC-BNC coaxial cable, length 5 m
Cat. No. 02325
GZL 1019 A10 BNC-BNC coaxial cable, length 10 m
Cat. No. 023266
Specifications
Antenna combiner 8-to-1
Frequency range 470 – 870 MHz
Distribution attenuation 0 dB (±1 dB)
RF input power max. 100 mW per input
Impedance 50 Ω
Power supply 100 V – 240 V AC, 50 – 60 Hz
Current consumption max. 120 VA
Temperature range –10 °C to +55°C
Weight 3 kg
AC3000_093908_0406_Sp6.book Seite 8 Donnerstag, 6. April 2006 1:59 13
Other manuals for AC 3000
2
Table of contents
Other Sennheiser Transmitter manuals
Sennheiser
Sennheiser SYSTEM 2020 User manual
Sennheiser
Sennheiser SI 1013 User manual
Sennheiser
Sennheiser SI 434 User manual
Sennheiser
Sennheiser XSW IEM Series User manual
Sennheiser
Sennheiser ZI 460 S User manual
Sennheiser
Sennheiser BF1083-UHF User manual
Sennheiser
Sennheiser SK 5212 User manual
Sennheiser
Sennheiser SR 300 IEM User manual
Sennheiser
Sennheiser SK 500 G2 User manual
Sennheiser
Sennheiser GP SK 3202 User manual
Sennheiser
Sennheiser BT T100 User manual
Sennheiser
Sennheiser SKM 1030 Dimensions
Sennheiser
Sennheiser SKP 100 G3 User manual
Sennheiser
Sennheiser SKP 30 User manual
Sennheiser
Sennheiser SI 1019 A User manual
Sennheiser
Sennheiser SK 100 G3 User manual
Sennheiser
Sennheiser SK 5012 User manual
Sennheiser
Sennheiser SK 2000 User manual
Sennheiser
Sennheiser SK 2012 User manual
Sennheiser
Sennheiser SK 500 G3 User manual
Popular Transmitter manuals by other brands
Dejero
Dejero EnGo 3x manual
Rosemount
Rosemount 4600 Reference manual
Speaka Professional
Speaka Professional 2342740 operating instructions
trubomat
trubomat GAB 1000 instruction manual
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 instructions
Rondish
Rondish UT-11 quick start guide
