Seagull Models JU-87 STUKA User manual

ASSEMBLY MANUAL

Code: SEA284

“ Graphics and specications may change without notice “ .

JU-87 STUKA GIANT SCALE

Specications:

Wingspan---------------90 in (228.6 cm).

Wing area---------------1328.7 sq.in (85.7 sq.dm).

Weight-------------------17.6 lbs (8.0 kg).

Length-------------------68.3 in (173.4 cm).

Gasoline Engine--------38-50cc

Radio--------------------7 channels with 7 servos.

JU-87 Instruction Manual.

ank you for choosing the JU-87 ARF by SG MODELS . e JU-87 was designed

with the intermediate/advanced sport yer in mind. It is a semi scale airplane which

is easy to y and quick to assemble. e airframe is conventionally built using balsa, ply-

wood to make it stronger than the average ARF, yet the design allows the aeroplane to be

kept light. You will nd that most of the work has been done for you already. e motor

mount has been tted and the hinges are pre-installed. Flying the JU-87 is simply a joy.

is instruction manual is designed to help you build a great ying aeroplane. Please read

this manual throughly before starting assembly of your JU-87 . Use the parts listing below to

indentify all parts.

Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is

capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU

ASSUME ALL RISK & REPONSIBILITY.

If you are inexperienced with basic R/C ight we strongly recommend you contact your R/C

supplier and join your local R/C model Flying Club. R/C Model Flying Clubs oer a variety of

training procedures designed to help the new pilot on his way to successful R/C ight. ey

will also be able to advise on any insurance and safety regulations that may apply.

INTRODUCTION.

WARNING.

KIT CONTENTS

KIT CONTENTS.

SEA284 JU-87 STUKA GIANT

1. Fuselage

2. Wing set

3. Tail set

4. Canopy

5. Cowling

6. Pilot

7. Aluminum wing tube

8. Wheel pants

ADDITIONAL ITEMS REQUIRED.

TOOLS & SUPPLIES NEEDED.

in cyanoacrylate glue.

Medium cyanoacrylate glue.

30 minute epoxy.

5 minute epoxy.

Hand or electric drill.

Assorted drill bits.

Modelling knife.

Straight edge ruler.

2mm ball driver.

Phillips head screwdriver.

220 grit sandpaper.

90° square or builder’s triangle.

Wire cutters.

Masking tape & T-pins.

read-lock.

Paper towels.

�38-50cc gasoline engine.

�Computer radio with 7 servos.

�Glow plug to suit engine.

�Propeller to suit engine.

�Protective foam rubber for radio

system.

HINGING THE AILERON.

2x10mm

Note: adjust decal rim straight away.

JU-87 Instruction Manual.

HINGING THE FLAP.

INSTALL THE AILERONS

CONTROL HORN.

Epoxy.

Aileron control horn.

Flap control horn.

Epoxy.

Fiberglass control horn

INSTALL FLAP CONTROL HORN.

INSTALL LED LIGHT.

Install the ap control horn using the

same method as same as the aileron con-

trol horns.

JU-87 Instruction Manual.

Epoxy.

HINGING THE FLAP FOR

CENTER WING.

1) Repeat steps to install hinging for

center wing as same as steps done for ai-

lerons.

2) en, t the joiner wire into the ap of

center wing as below pictures.

3) Slide the wing tube into the wing tube

socket.

4) Slide the wing panel into position,

guiding the extensions from the side

wing into center wing.

INSTALLING THE AILERON SERVOS.

Because the size of servos dier, you

may need to adjust the size of the precut

opening in the mount. e notch in the

sides of the mount allow the servo lead to

pass through.

1) Using a small weight (Weighted fuel

pick-up works well) and string, feed the

string through the wing as indicated.

2) Place the servo between the mounting

blocks and space it from the hatch. Use a

pencil to mark the mounting hole loca-

tions on the blocks.

JU-87 Instruction Manual.

3) Use drill bit in a pin vise to drill the

mouting holes in the blocks.

4) Apply 2-3 drops of thin C/A to each

of the mounting holes. Allow the C/A to

cure without using accelerator.

C/A glue

5) Use dental oss to secure the connec-

tion so they cannot become unplugged.

6) Secure the servo to the aileron hatch

using Phillips screwdriver and the screws

provided with the servo.

7) Apply 1-2 drops of thin C/A to each of

the mounting tabs. Allow the C/A to cure

without using accelerator.

8) Remove the string from the wing at

the servo location and use the tape to at-

tach it to the servo extension lead. Pull

the lead through the wing and remove

the string.

9) Set the aileron hatch in place and use a

Phillips screw driver to install it with four

wood screws.

INSTALLING THE FLAP SERVO.

Repeat the procedure as above for the

ap servo.

2x10mm

AILERON PUSHROD

INSTALLATION.

Please see below pictures.

100mm

M3 clevis. M3 lock nut.

JU-87 Instruction Manual.

INSTALLING THE FLAP PUSHROD.

INSTALLING THE LANDING GEAR.

Repeat the procedure as aileron push-

rod.

100mm

M3 clevis. M3 lock nut.

This manual suits for next models

Table of contents

Other Seagull Models Toy manuals

Seagull Models

Seagull Models SPACE WALKER II User manual

Seagull Models

Seagull Models SEA 285 User manual

Seagull Models

Seagull Models GIANT SCALE P-47 RAZORBACK 50-61cc/EP ARF User manual

Seagull Models

Seagull Models PILATUS B4 User manual

Seagull Models

Seagull Models Embraer EMB-312 Tucano T-27 Brazilian Air Force 85 span... User manual

Seagull Models

Seagull Models fair child PT19 User manual

Seagull Models

Seagull Models Mini Nemsis EP User manual

Seagull Models

Seagull Models GROB TUTOR G115 User manual

Seagull Models

Seagull Models Nemesis 114 User manual

Seagull Models

Seagull Models STEEN SKYBOLT N250SB 15CC User manual

Seagull Models

Seagull Models YAK 54 User manual

Seagull Models

Seagull Models Mehari Aerobatics CEA-309 User manual

Seagull Models

Seagull Models SEA232 User manual

Seagull Models

Seagull Models SPARROW HAWK 1.6-2.0 User manual

Seagull Models

Seagull Models Maxi Lift SEA209N User manual

Seagull Models

Seagull Models Swift 40 User manual

Seagull Models

Seagull Models THUNDERBOLT P47G SNAFU 60 ARF User manual

Seagull Models

Seagull Models YAK 54 User manual

Seagull Models

Seagull Models A6M Zero Fighter 67 User manual

Seagull Models

Seagull Models JUNKERS CL1 G-BUYU User manual

Seagull Models

Seagull Models SEA385 User manual

Seagull Models

Seagull Models Boomerang 40 User manual

Seagull Models

Seagull Models AT-6 TEXAN User manual

Seagull Models

Seagull Models CLASSIC UGLY STICK User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions