Sanus LMF115 User manual

LMF115

INSTRUCTION MANUAL

Para Español ver página 18

Recommended placement Our US-based

install experts

are standing

by to help.

Call us at:

1-855-734-7805

Get it right the

ﬁrst time.

HeightFinder™

shows you

where to drill.

Check it out at:

SANUS.com/2850

Want to watch a

video that shows

how easy this DIY

project will be?

Watch it now at:

SANUS.com/2848

WE’RE HERE TO HELP

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Before getting started, let’s make sure this mount is perfect for you!

—

Perfect!

Yes

—

This mount is NOT compatible. Visit MountFinder.sanus.com or call

1-855-734-7805 to ﬁnd a compatible mount.

Do you have

all the tools

needed?

What is your

wall made of?

50 lb

(22.6 kg)

Ready to begin?

Does your TV

(including accessories)

weigh more than

50 lb (22.6 kg)?

Drywall with

wood studs?

Solid concrete or

concrete block?

Perfect!

Wood Stud Install

Concrete Install

Awl

Pencil Level Stud Finder

Screwdriver

Tape

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric

Drill Hammer

1/2 in.

(13 mm)

Socket

Wrench Drill Bit

3/8 in.

(10 mm)

Concrete

Unsure?

Call Customer Service: 1-855-734-7805

Concrete kit CMK1 (not included)

CAUTION:

DO NOT

install into

drywall alone

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use

of this product, contact Customer Service at 1-855-734-7805.

CAUTION: Avoid potential personal injury or property damage!

●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

●This product is designed for INDOOR USE ONLY

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Dimensions

7.87in

200mm

3.94in

100mm

MIN

3.94in

100mm

MIN

15.75in

400mm

MAX

15.75in

400mm

MAX

11.81in

300mm

8.27in

210mm

4.01in

101.9mm

9.92in

251.9mm

0.33in

8.4mm

17.07in

433.7mm

17.07in

433.7mm

6deg

ROLL

15.02in

381.4mm

15deg

DOWN

5deg

2.78in

70.6mm

WITHOUT

EXTENSION

BRACKETS

3.07in

78mm

45deg45deg

SIMULATED 46"

FLAT SCREEN TV

TV INTERFACE

WALL PLATE

TOP VIEW - EXTENDED

3-D

SIDE VIEW - EXTENDED

SIDE VIEW RETRACTED

TOP VIEW - RETRACTED

FULLY ASSEMBLED MOUNT

Before getting started, let’s make sure this mount is perfect for you!

M8 x 12mm

5/16 x 2¾ in.

M8 x 16mm M8 x 35mm

M8 x 25mm M8 x 50mm

M5 x 6mm

M6 x 12mm

M6 x 35mm

M6 x 20mm

M4 x 12mm M4 x 35mm

Fischer UX10 x 60R Anchor

NOTE: Not all hardware included will be used.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to

your dealer; contact Customer Service. Never use damaged parts!

Supplied Parts and Hardware

STEP 1 Parts and Hardware

TV Bracket

Extender

TV Bracket

Screw

TV Screws

(qty. 4 each) [Only one size ﬁts your TV]

Washers Spacer

[If necessary]

M6/M8

M4/M6/M8

22 mm

M4/M6/M8

2.5 mm

(qty. 4)

(qty. 1)

(qty. 8)

(qty. 4)

M8 x 12mm

5/16 x 2¾ in.

M8 x 16mm M8 x 35mm

M8 x 25mm M8 x 50mm

M5 x 6mm

M6 x 12mm

M6 x 35mm

M6 x 20mm

M4 x 12mm M4 x 35mm

Fischer UX10 x 60R Anchor

STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED]

STEP 2 Parts and Hardware

STEP 3 Parts and Hardware

Nut Cap

Arm Assembly

Wall Plate

Template

Lag Bolt

Concrete Anchor

Washer

Contact Customer Service to inquire about the CMK1

Concrete Installation Kit.

Locking Screw

(qty. 1)

(qty. 2)

(qty. 1)

(qty. 2)

(qty. 1)

07 (qty. 1)

inches

inch dimensions are approximate

inches cm mm

3 7.5 75

4 10 100

7 ⅞ 20 200

11 ¾ 30 300

15 ¾ 40 400

STEP 1 Attach TV bracket to TV

1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV bracket

Measure the width and height of your

TV hole pattern in cm.

Record your measurements:

Width_______cm x Height_______cm

Based on your TV hole pattern measurements

(Wcm x Hcm), determine your TV bracket

configuration: A, B, C, D or E.

20.0

[7.87]

20.0

[7.87]

40.0

[15.75]

40.0

[15.75]

These smaller hole patterns only use TV

bracket 04 . Do not use the four extenders

05 and eight screws 06 .

10.0

[3.94]

10.0

[3.94]

Assemble extenders 05 onto TV bracket

04 and secure using eight screws 06 in

the corner holes indicated.

05 05

30.0

[11.81]

30.0

[11.81]

10.0 x 10.0

20.0 x 10.0

20.0 x 20.0

For TV Hole Pattern

Measurements

(Dimensions in cm)

30.0 x 30.0

40.0 x 40.0

For TV Hole Pattern

Measurements

(Dimensions in cm)

D E

20.0

[7.87]

20.0

[7.87]

Assemble extenders 05 onto TV bracket

04 and secure using eight screws 06 in

the corner holes indicated.

Assemble extenders 05 onto TV bracket

04 and secure using eight screws 06 in

the corner holes indicated.

Assemble extenders 05 onto TV bracket

04 and secure using eight screws 06 in

the corner holes indicated.

40.0

[15.75]

40.0

[15.75]

40.0

[15.75]

06 06

30.0

[11.81]

40.0 x 30.0

For TV Hole Pattern

Measurements

(Dimensions in cm) 40.0 x 20.0

For TV Hole Pattern

Measurements

(Dimensions in cm) 20.0 x 40.0

For TV Hole Pattern

Measurements

(Dimensions in cm)

Too Long

Too Short

Correct

1.3 Select TV Screw Diameter 1.4 Select TV Screw Length

CAUTION:

Verify adequate thread

engagement with your screw/

washer/spacer combination

AND TV bracket.

–Too short will not hold the TV.

–Too long will damage the TV.

M4 M6 M8

a:For flat-back TVs,

no spacers 03

required.

b:Spacers 03 supplied for:

●Round (irregular) back TVs

●Extra space needed (for cables

or inset mounting holes)

FLAT BACK ROUND BACK CABLES INSET HOLES

Only one size fits your TV.

If your TV included inset

spacers or wall mount adapters,

use them

UNDER the

mount hardware.

1.5 Attach TV Bracket

TV Bracket Conﬁguration B

Illustrated (with spacers) 0203

a: Flat Back

b: Round Back / Extra Space

TV Bracket Conﬁguration A

Illustrated (with spacers)

Position your TV bracket configuration (A, B, C, D or E) onto your TV, making sure the bracket is both centered and level over your TV hole pattern.

NOTE: The hanging tab Hon TV bracket 04 must be oriented toward the top of the TV.

Secure the TV bracket using your selection: (a) screw/washer or (b) screw/washer/spacer.

CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to

secure the TV bracket to the TV. DO NOT overtighten the screws.

H01

1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

2. Position the template 07 at your desired height and line up the holes with your stud center line. Level the template and tape in place.

≤ 5/8 in.

(16 mm)

STEP 2A Attach Wall Plate to Wall Wood Stud Installation

CAUTION: Avoid potential personal injury or property damage!

●Drywall covering the wall must not exceed 5/8 in. (16 mm)

●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½x 3 ½in. (38 x 89 mm)

Table of contents

Languages:

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 