Samsung SW-903(P) User manual

BEFORE USING THE WASHING MACHINE 1

PRECAUTIONS 1

CONTROL PANEL 2

DESCRIPTION ANDCLEANINGOFPART 2

WASHING PROCEDURE 3

To Wash 3

To Spin Dry 3

To Rinsing 4

Overflow rinse 4

Additional rinse 4

INSTALLATION 5

Location 5

Mounting the legs 5

Connecting the drain hose 5

Changing the position of the drain hose

LAUNDRY GUIDE 5

MAINTENANCE 6

TROUBLE SHOOTING 6

WASHING MACHINE

Before operating the washing machine, please read this manual

thoroughly, and retain it for future reference.

Owner’s Instructions

SW-903(P)/SWT90C1(P)/SWT90C2(P)

•Remove the cap-hose

from the drain hose.

•In the case of pump drained

washer, remove

the cap-hose from

the drain hole.

•Don't use excessively hot water.

(50˚C or more)

Plastic parts may be deformed or damaged.

Also, clothing may be deformed or decolored.

•Before washing,check all pockets.

If nails or pins remain in pockets,they may

damage the washer or clothes.

•Close the water tap a little if the

water pressure is too high.

•Never splash water on the control panel.

•Be sure to cover with the inner

cover on laundry before spinning.

This prevents laundry from

being tossed out and damaged.

•To avoid water splashes, close the

wash tub lid.

•Be sure laythe drain hose down.

(in case no drain pump)

•Be sure that the washer is grounded.

To avoid electrical shock,use a

metal pipe for the ground

connection. But, don't ground the

washer with gas pipes or telephone

lines to avoid to dangers of explosion

or lightning strike.

•Do not put your hands into the

spin dryer basket when it is

spinning.

Your fingers can be caught by

spinning laundry and damaged.

•Never allow children to operate

or play with the washer.

Children playing with the

washer may accidentally

fall into the washing tub.

•Disconnect the power cord from the

power supply when not in use.

•Ventilation opening must not be obstructed

by carpeting when the washing machine is

installed on a carpeted floor.

•If the supply cord of this appliance is

damaged, it must only be replaced by a repair

shopappointed by the manufacturer, because

special purpose tools are required.

•Warning to avoid overfilling and damages this

appliance must be filled with the operator

present using a moderate water supply

pressure only.

•

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any

other appliance.

•

To avoid overfilling and damages this appliance

must be filled with the operator present using a

moderate water supply pressure only.

1.WASH TIMMER

This is used to set the

wash time, 1-15 minutes.

2.CYCLE SELECTOR

This is used to set the

Washing/Rinsing

or Draining.

3.SPIN DRY TIMER

This is used to set the

spin time, 1-5 minutes.

4.WATER SELECTOR

During washing, WATER SELECTOR

KNOB should be selected.

During spin rinsing, WATER

SELECTOR KNOB should

be selected.

5.WASH SELECTOR(CONTROL)

This is used to select wash action.

You can wash laundry effectively

by various methods.

6.DRAIN SELCTOR

Be sure to press the selector

knob to “WASH” while washing.

7.WATER INTAKE

Connect water inlet to

a tap with a suitable.

CONTROL PANEL

Wash/Rinse

Drain Rinse

CYCLE SELECTOR

Wash

Drain

CYCLE SELECTOR

SPIN DRY TIMER

Soft Heavy

Normal

WASH SELECTOR

Delicate

(LITE) Heavy

Normal

WASH CONTROL

12 6

WASH TIMER

WATER SELECTOR

Wash Spin

BEFOREUSINGTHEWASHING MACHINE

CAUTIONS

PRECAUTIONS WHEN OPERATING

Drain Wash

DRAIN SELECTOR

WATER INTAKE

HOW TO CLEAN THE FILTER

(In case drain pump)

1. Place a rag under the washer filter

not to wet the floor.

2. Rotate the filter counterclockwise

and pull out the filter.

3. Remove dirts and

rotate the filter

clockwise until it

locks in position.

When you open this

lid while the spin basket is

spinning,the spinning will

be stopped by the brake

system.

POWER CORD

EARTH WIRE

WATER DRAIN HOSE

(without pump)

SPIN DRYER BASKET

PULSATOR

CONTROL LEG

The plug’s shape

may not be similar to that

shown in this drawing.

SPIN DRYER LID

(with pump)

WASH TUB LID

Be sure to keep

the lid closed

during washing

and spinning.

WASH TUB

DRAIN FILTER

DRAIN HOSE

OVERFLOW

FILTER

LINT FILTER

INNER LID

DESCRIPTION AND /CLEANING OF PARTS

This is used for

gathering the

dregs made

during washing.

CLEANING THE LINT FILTER

• If the dregs are piled up in the

lint filter after finishing the wash,

push down and

pull it out as

shown in

the

figure.

• Wash the filter

net in water.

OVERFLOW FILTER

• Pull the upper side of the

overflow filter with your

fingers into the holes

in the direction of

arrow as shown

in the figure.

OVERFLOW FILTER

Pull the upper side of the

overflow filter with

two

fingers inserted into

hole ‘A’in the

direction of arrow

as shown in the figure.

CLEANING THE FILTER

• Pull the overflow filter out and take up

the filter by removing 3 screws as

shown in figure. Wash the filter and

washing tub.

CLEANING THE FILTER

• Push the strainer(filter) out and take

up the filter as shown in figure.

Wash the filter and washing tub.

DRAIN FILTER

In case of incomplete drain,

disassemble the drain filter with

screw driver(+), and remove

lints from the filter as shown

in the filter as shown in

the figure.

CLEANING THE WASH TUB

First, fill water in the wash tub to ‘L’level( , then drain water from the wash tub simultaneously with

operating wash cycle for 1~2 minutes. •Close the wash tub lid.

TO WASH (A-type)

1. Before starting to wash, proceed as follows,

Connect the water supply hose and open

the water tap.

•Lay the drain hose down toward

a sinkhole. (In case no drain pump)

•Place the drain hose in sink or bath.

(In case no drain pump)

•Connect the power cord to the power

supply outlet.

2. Set the CYCLE SELECTOR KNOB to

“WASH.RINSE”.(in case drain pump WASH)

3. Set the WTER SELECTOR

KNOB to the desired mode.

4. Set the WASH SELECTOR

KNOB to the desired mode.

5. Fill water in the wash tub

and add the detergent.

6. Load laundry in the

wash tub and fill water

to proper water level.

7. Set the WASH TIMER

1-15 minutes.

8. After washing, set the CYCLE

SELECTOR KNOB to

'DRAIN' for drain.

TO WASH (B-type)

1. Before starting to wash, proceed as follows,

Connect the water supply hose and open

the water tap.

•Lay the drain hose down toward

a sinkhole. (In case no drain pump)

•Place the drain hose in sink or bath.

(In case no drain pump)

•Connect the power cord to the power

supply outlet.

2. Select the WASH

CONTROL KNOB

for desired mode.

3. Press the

DRAIN SELECTOR KNOB

to ‘WASH’.

4. Fill water in the wash tub

and add the detergent.

5. Load laundry in the

wash tub and fill water

to proper water level.

6. Set the WASH TIMER

1-15 minutes.

7. After washing Press the

DRAIN SELECTOR KNOB to

‘DRAIN’for drain.

TO SPIN DRY

1. Transfer the clothes into the

spin basket and arrange the

clothes evenly.

2. Be sure to replace the safety

cover and close the

inner lid.

3. Close the spin

dryer lid.

4. Set the SPIN DRY

TIMER 1-5 minutes.

WASHING PROCEDURE

A-type : SWT90C1(P)/SWT90C2(P)/WT10S0(P)/WT10S1(P)/WT10S2(P) B-type : SW-903(P)

Delicate

(LITE) Heavy

Normal

WASH CONTROL

DRAIN WASH

DRAIN SELECTOR

DRAIN WASH

DRAIN SELECTOR

WATER SELECTOR

Wash Spin

Wash/Rinse

Drain Rinse

CYCLE SELECTOR

Wash

Drain

CYCLE SELECTOR

SPIN DRY TIMER

12 6

WASH TIMER

inner lid

safty cover

12 6

WASH TIMER

TO RINSING (A-type)

1. Set the cycle selector KNOB to

‘WASH.RINSE’.

(In the case of drain

pump ‘WASH’)

2. Supply the proper amount of water

so as not to delete one space overflow

the top of the washing tub.

3. Set the WASH TIMER to

2~3 minutes.

4. Drain the water.

Set the delete one space cycle

selector KNOB to ‘DRAIN’.

5. Repeat this cycle until drain

water is clean. (2~3 cycles)

TO RINSING (B-type)

1. Press the DRAIN SELECTOR

KNOB to ‘WASH’.

2. Supply the proper amount

of water so as not to

delete one space overflow

the top of the washing tub

and put the laundry

into the washing tub.

3. Set the WASH TIMER

2~3 minutes.

4. Drain the water.

Set the DRAIN SELECTOR

KNOB to ‘DRAIN’.

5. Repeat this cycle until drain

water is clean. (2~3 cycles)

OVER FLOW RINSE (A-type)

1. Keep supplying

water(adjust water

pressure to ensure

that the amount of

water supplied

does not exceed the amount

of water drained.)

2. Set the WASH TIMER

6~8 minutes.

3. As soon as the

WASH TIMER

shuts off, turn off

the water tap.

4. Set the CYCLE

SELECTOR KNOB

to ‘DRAIN’.

OVER FLOW RINSE (B-type)

1. Keep supplying

water(adjust water

pressure to ensure

that the amount of

water supplied

does not exceed the amount

of water drained.)

2. Set the WASH TIMER

6~8 minutes.

3. As soon as the

WASH TIMER

shuts off, turn off

the water tap.

4. Press the DRAIN SELECTOR

KNOB to ‘DRAIN’.

ADDITIONAL RINSE

1 After rinsing you can select this

course for more effective rinse

(Don't just select this course

for rinse.) Load the laundry

evenly into the spin basket.

2 Set the WATER SELECTOR

KNOB to SPIN and

CYCLE SELECTOR

KNOB to ‘DRAIN’.

3 Supply water for about 1 minute.

Adjust the water flow to prevent

overflow from the wash tub.

4 After completing the water supply,

cover the laundry with

safety cover and close

the inner lid.

5 Close the spin dryer lid.

6 Set the SPIN DRY

TIMER 2~3 minutes.

Wash/Rinse

Drain Rinse

CYCLE SELECTOR

Wash

Drain

CYCLE SELECTOR

Wash/Rinse

Drain Rinse

CYCLE SELECTOR

Wash

Drain

CYCLE SELECTOR

12 6

WASH TIMER

12 6

WASH TIMER

12 6

WASH TIMER

12 6

WASH TIMER

12 6

WASH TIMER

12 6

WASH TIMER

DRAIN WASH

DRAIN SELECTOR

DRAIN WASH

DRAIN SELECTOR

DRAIN WASH

DRAIN SELECTOR

WATER SELECTOR

Wash Spin

inner lid

safety

cover

SPIN DRY TIMER

WASHING TIME

The amount of detergent

is average. Follow the

instruction printed on the

package for amount of

detergent. Choose the

amount of detergent

according to the fabric type.

TYPE OF FABRIC

Thin (synthetic fiber)

wool

cotton

thick (cotton)

SPIN DRY TIME

DETERGENT

TIME

1 min.

1~2 min.

3~5 min.

5 min.

AMOUNT OF

DETERGENT

44g

56g

67g

WATER

LEVEL

Low (44l)

Medium (56l)

High (67l)

DETERGENT

In case the water level is at “High”,

amount of water is 42l.

Follow the directions printed on the package

for amount of detergent. Choose the amount of

detergent depending on the fabric type and

water level.

LAUNDRY GUIDE

-H-

Leave some space of

at least 15cm between the washing machine

and the wall.

Place the washing machine on a sturdy flat

surface.

If the washing machine is placed on an uneven

or weak surface, noise or vibration may occur.

(Allowable is 2˚)

Never install the washing machine near water.

Do not place the washing machine in steamy room or

where the washing machine is directly exposed to

rain. Moisture may damage electrical insulation

and cause an electrical shock to occur.

Avoid direct sunlight or heating devices.

As plastic and electrical components are

affected by direct heat, never place the washing

machine near heaters, boilers, etc., or under direct

sunlight.

Install the drain hose

about 70~80cm above

the ground for pump model.

MOUNTING THE LEGS

Lay down the washer with its back facing

downward. Insert four legs into the leg mounting

sections of the base corners of the main body.

Insert the claw of the

leg with the square

hole of the leg

mounting section,

and push the leg in

the arrow direction

as shown in the

figure until it clicks.

After attaching the connector ring(a), insert the

drain hose(b) in the draining direction.

CONNECTING THE DRAIN HOSE

1. Before connecting the drain hose, remove

the cover (a) from the drain hole.

2. After pressing the joint ring (b), insert the

drain hose(c) to drain direction.

CHANGING THE POSITION OF THE

DRAIN HOSE

Before attempting to change the position of the

drain hose, disconnect the plug from the outlet.

1. Route the drain hose inside the machine.

2.Take out the drain hose from the opposite hole

and insert the drain hose into the hose holder.

70~80cm

Claw Square

hole

Bottom face of

main body

Leg

INSTALLATION

LOCATION

CONNECTING THE DRAIN HOSE

(In case of pump

drained washer)

(C)

(b)

(C)

(b)

(a)

Hose holder

Water Level

Sgurts (Synthetics)

Under Shirts (Cotton)

Workign clothes (Cotton)

Low

22 Pieces

38 Pieces

16 Pieces

Middle

29 Pieces

48 Pieces

20 Pieces

High

35 Pieces

58 Pieces

25 Pieces

TO LOAD THE LAUNDRY INTO

THE SPIN BASKET.

Press the laundry evenly and put the safety

cover into the spin basket as shown in the

figure.

TO RETRIEVE THE CLOTHING THAT HAS

FALLEN BETWEEN THE BASKET AND TUB.

For safety reason, pull the power supply plug out

of the socket.

1. Unscrew the spin dryer hatch.

2. The spin dryer hatch is

fixed to the brim by the

concave and convex

parts at two places.

Expand the concave and

convex parts,and pull up

the spin dryer hatch to

remove it.

3. Retrieve the clothing.

4. Close the spin dryer hatch. Push the hatch

firmly until the catch at the front is securely

attached.

The washing

machine does

not work.

Clothes do

not move freely.

Incomplete

spinning

Incomplete

draining

The spin dryer

basket will not

run.

Check that the power cord is

properly connected to a power

outlet. Isthere a power failure?

Is the machine overloaded?

Is the laundry arranged

evenly?

Is the filter clogged with lint?

Is the spin dryer lid closed

completely?

Are laundry items (socks, etc.) falling

out of the spin dryer basket and

clinging to the axle?

•See “To retrieve...”on page 6.

TROUBLE CHECK POINT

AFTER OPERATION

1. Remove the power cord from the outlet.

2. Take out the laundry.

3. Close the water tap and disconnect the water

supply hose.

4. Clean the washing machine.

- Periodical cleaning will extend the life of your

washing machine.

- Do not spray the unit water or use tinner, benzene,

alcohol etc, for cleaning it.

MAINTENANCE TROUBLE SHOOTING

CLEANING THE WASHING MACHINE

Wipe off stains on the cabinet and operation pane

with a soft cloth. Neither use benzene, thinner,

cleanser, or wax, nor scrub the washing machine

with a brush. Painted surfaces or plastic parts will

be damaged.

IF YOU NEED HELP.

Do not hesitate to call your local Samsung Service Center.

They will be pleased to help you. Be sure to give them your name,

address, telephone number and the purpose of the call.

SPECIFICATIONS

DIMENSIONS

SWT90C1(P)/SWT90C2(P)

SW-903(P)

WT10S0(P)/WT10S1(P)/WT10S2(P)

WATER PRESSURE

WEIGHT

EXTRACTION EFFICIENCY

STANDARD QUANTITY OF WATER

RATING TIME

820 x 524 x 1000 mm

820 x 524 x 920 mm

820 x 524 x 993 mm

0.05~0.78 MPa(

0.5 ~ 8.0kg . f/cm2

)

36 kg

50 %

Low : 44 l Middle : 56 l High : 67 l

Washing 1 Hour / Spinning 15 minutes

DC68 - 01288A-01

Other manuals for SW-903(P)

This manual suits for next models

Table of contents

Other Samsung Washer manuals

Samsung

Samsung WF8604AH User manual

Samsung

Samsung WA70F5S4 User manual

Samsung

Samsung WF42H5600 Operating instructions

Samsung

Samsung WA50K8600AV/AA User manual

Samsung

Samsung WA90V3 User manual

Samsung

Samsung WF42H5000 Operating instructions

Samsung

Samsung WD-J1255(V/S/C/R) Owner's manual

Samsung

Samsung P1053 User manual

Samsung

Samsung WF-J1461 User manual

Samsung

Samsung WA127HA1 User manual

Samsung

Samsung WA24A8370G Series User manual

Samsung

Samsung WF457ARG SERIES User manual

Samsung

Samsung WA49B5205A Series User manual

Samsung

Samsung WA5451A User manual

Samsung

Samsung WA52M8650AW User manual

Samsung

Samsung WW85M7 Series User manual

Samsung

Samsung WF455ARG SERIES Installation guide

Samsung

Samsung WF6522S8 User manual

Samsung

Samsung WA47CG3500A Series User manual

Samsung

Samsung WW11R64 Series User manual

Samsung

Samsung WA45H7200A User manual

Samsung

Samsung WA49B5105 Series User manual

Samsung

Samsung WW9 TA Series User manual

Samsung

Samsung WF433BTGJWR/A1 User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide