Samsung Data Migration v2.0 Reference manual
2013. 3 (Rev 2.0.)
1
Samsung Data Migration v2.0
Introduction and Installation Guide
2013. 3 (Rev 2.0.)
2
Legal Disclaimer
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS,
INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes
only. All information discussed herein is provided on an “AS IS” basis,
without warranties of any kind. This document and all information
discussed herein remain the sole and exclusive property of Samsung
Electronics. No license of any patent, copyright, mask work, trademark or
any other intellectual property right is granted by one party to the other
party under this document, by implication, estoppels or otherwise.
Samsung products are not intended for use in life support, critical care,
medical, safety equipment, or similar applications where product failure
could result in loss of life or personal or physical harm, or any military or
defense application, or any governmental procurement to which special
terms or provisions may apply. For updates or additional information
about Samsung products, contact your nearest Samsung office.
Copyright © 2013
This material is copyrighted by Samsung Electronics. Any unauthorized
reproductions, use or disclosure of this material, or any part thereof, is
strictly prohibited and is a violation under copyright law.
Trademarks & Service Marks
The Samsung Logo is the trademark of Samsung Electronics. Adobe is a
trademark and Adobe Acrobat is a registered trademark of Adobe
Systems Incorporated. All other company and product names may be
trademarks of the respective companies with which they are associated.
2013. 3 (Rev 2.0.)
3
Introduction
The Samsung Data Migration software is designed to help users quickly,
easily, and safely migrate all of their data – including their current
operating system, application software, and user data – from their
existing storage device (e.g. HDD) to their new Samsung SSD.
Samsung Data Migration software is developed and distributed exclusively
for owners of Samsung Solid State Drives (SSDs).
Precautions
1. When cloning the content of the source drive (e.g. HDD), all data on the
Target Disk (Samsung SSD) will be deleted and is impossible to recover.
Therefore, if you have stored any data that you would like to keep on
the Target Disk, please back it up in advance.
2. Samsung Electronics assumes no responsibility for any loss of data
that may occur on the Target Disk in the course of using this software
and will not be held liable for data recovery services. Even if the
migration process fails, data contained on the Source Disk is not
affected.
Improvements
Samsung Data Migration v2.0 supports advanced cloning that
automatically clones your PC data onto your new Samsung SSD,
regardless of how large the data size is.
2013. 3 (Rev 2.0.)
4
System Requirements
Component
Requirement
Operating System
Windows XP SP2 (32-bit)
Windows Vista (32/64-bit)
Windows 7 (32/64-bit)
Windows 8 (32/64-bit)
PC Memory (RAM)
1 GB or more
Disk Space
Minimum 10 MB required for installation
Supported Partition Types
MBR, GPT
Supported Languages
English
Source Disk
The Source Disk (HDD or SSD) must contain the
operating system installation
Target Disk
The Target Disk must be one of the following:
Samsung SSD 840 Series
Samsung SSD 840 PRO Series
Samsung SSD 830 Series
Samsung SSD 470 Series
2013. 3 (Rev 2.0.)
5
Limitations
1. This software only supports the Windows operating systems listed in the
User Manual.
2. This software only supports the Samsung SSDs listed in the User Manual.
OEM storage devices provided through a computer manufacturer or
supplied through another channel are not supported.
3. This software will run only if the operating system is installed on the Source
Disk. It will not function on disks that lack an operating system installation.
4. If the amount of data stored on the Source Disk exceeds the capacity of the
Target Disk, cloning will not proceed. The Source Disk (e.g. “C:” drive) must
consist of at least 20% free space. If more than 80% of the Source Disk is
filled with data, the cloning process cannot proceed normally. Secondary
partitions require at least 5 GB of free space.
5. On systems with two (2) drives or more (e.g. “C:”, “D:”, and “E:” drives) with the
operating system installed on the “C:” drive, only the first two drives will be
cloned. The “System” partition that is created during Windows installation is
automatically replicated.
6. OEM recovery partitions, generated at the factory by computer
manufacturers, cannot be replicated.
7. A difference of a few GB of data capacity between the Source and Target
Disks is normal after cloning. The software does not copy the files Windows
automatically generates to manage virtual memory (page files and
hibernation files).
8. This software cannot clone encrypted disks. In order to clone an encrypted
disk, you must first remove the password from the disk.
9. If the mainboard chipset drivers are not up to date when cloning, this
software may not function properly.
10. If there are multiple operating systems installed on the PC (e.g. Windows 7
is installed on the C drive and Windows 8 is installed on the D drive), the
cloned disk may not function properly.
2013. 3 (Rev 2.0.)
6
11. If the Source Disk is damaged (e.g. the disk has bad sectors), the cloned disk
may not function properly.
12. When attempting to clone a disk using this software, it is recommended that
you close all other programs and free up sufficient memory before cloning.
13. If you have instant PC recovery software installed on your system, this
software may not function properly.
14. If a Source Disk is converted into a dynamic disk, the software may not
function properly.
15. The files in the user's Library folder are listed by default on the screen for
selecting files to exclude during cloning.
16. To exclude files that are not in the Library folder, you can search for them
by scanning folders. Program Files, Windows files, and Recycle Bin files are
not scanned.
2013. 3 (Rev 2.0.)
7
www.samsung.com/ssd, www.samsung.com/samsungssd
All brand and product names are trademarks of their respective companies.
Design and contents of this manual are subject to change without notice.
©2013 Samsung Electronics, Co., Ltd. All rights reserved.
Table of contents
Other Samsung Software manuals
Samsung
Samsung ML 2851ND - B/W Laser Printer User manual
Samsung
Samsung WE VoIP User manual
Samsung
Samsung CLX3175FN - COL LASERPR MLTFUNC 4/17PPM... User manual
Samsung
Samsung ANYCAM SNC-35E User manual
Samsung
Samsung CLX 6210FX - Color Laser - All-in-One Manual
Samsung
Samsung ML-2550 User manual
Samsung
Samsung SCX 4725FN - B/W Laser - All-in-One User manual
Samsung
Samsung HMX-U10RN Instruction Manual
Samsung
Samsung Auto Backup User manual
Samsung
Samsung SCX 6322DN - B/W Laser - All-in-One User manual
Samsung
Samsung PS63A756T1M User manual
Samsung
Samsung ML 3471ND - B/W Laser Printer User manual
Samsung
Samsung 4116 - SCX B/W Laser Release note
Samsung
Samsung S1A0905-S0B0 User manual
Samsung
Samsung HMX-S10BN User manual
Samsung
Samsung HXDU010EB - Story Station 1 TB External Hard... User manual
Samsung
Samsung MFP SCX-6345N User manual
Samsung
Samsung UN50EH5300F User manual
Samsung
Samsung CLX 6210FX - Color Laser - All-in-One Manual
Samsung
Samsung ML 1630 - B/W Laser Printer User manual
