Samsung SDH-B73023BF User manual

English _1

ALL-IN-ONE SECURITY SYSTEM

Quick Start Guide

KIT MODEL

SDH-B73023BF/SDH-B73043BF/SDH-B74043BV/

SDH-B74043DF/SDH-C74083HF/SDH-C75083BF/

SDH-C75123BF

DVR MODEL

SDR-B73303/SDR-B74303/SDR-B75303

Thank you for purchasing the DVR Security System.

Follow the simple steps in this guide to set up and start using your new security system.

If you have any questions or need help installing your new product, please contact our free technical support.

US:

Telephone: +1-877-349-3149 (Toll free)

6am - 6pm PST (7 days a week)

Web: www.samsungsv.com

Europe:

Telephone: 00800-801-08022 (Toll free)

8am - 4pm CET, Monday - Friday (5 days a week)

Web: www.hanwha-security.eu

❒Front

❒Back

`The following figures are based on Model SDR-B75303.

Part Name Function

1Video input Connect with (analog) video input device, standard BNC port

2Audio input Connect with audio input signals, RCA port

3VGA port Connect with VGA display devices, such as PC monitor.

4HDMI Connect with HDMI display devices, such as PC monitor.

5RS-485 RS485 port. Connect by referring to the interface definition below

6USB port Connect with USB.

7Audio output Audio signal output, RCA port

8LAN: (RJ45)

Network port Connect with LAN, Ethernet cable.

9Power port Connect with the power supply DC12V 2A, included with the device

USB

REC NET PWR

HDMI

VGA

LAN

12 10

3 1

4 2

AUDIO

INPUT AUDIO

OUTPUT

VIDEO INPUT

RS-485

12V

CAUTION

RISKOF ELECTRI SHOCK

DONOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK

DO NOT OPEN COVERS. NO USER SERVICEABLE

PARTSINSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT

EXPOSE UNITS NOT SPECIFICALLYDESIGNED

FOR OUTDOOR USE TO RAIN OR MOISTURE.

RS-485

7 8 9

1 2 3

2_ English

Startup Wizard

After DVR startup is completed, the startup wizard will be displayed.

Wizard setting menu includes:

• Homepage

• Admin password setting

• Hard drive management

• Video recording schedule

• Basic system configuration

• Network setup

• E-mail setting

• DDNS setting

You can click on "Don't show this window next time" if you do not want the setting wizard to start automatically next time.

Set Admin Password

Please create a username and password for your DVR. Password

MUST be 8~13 characters long. When password is 8~9 characters

long, it should be with at least a combination of letters, digits and special

symbols. If it is 10~13 characters long, it should be with at least a com-

bination of two types of characters. 4 or more contiguous or repeated

characters or key arrangement are prohibited, for example 1111, 1234,

abcd, qwerty.

Hard Drive Management

New hard drive(s) connected must be formatted before use. Upon

connection, it will indicate to format new hard drive. Click on "Select" to

select the unformatted hard drive. Click on "Format HDD" to pop up the

user login window and enter the password to log in. A notice window will

indicate "Entire Data Will Be Erased. do You Want To Continue?". Click

"OK" to format the disk. When the progress bar is complete, the format-

ting process is completed.

Video Recording Schedule. Select the channel and the date to be set. One week's schedule can be set. The record "sched-

ule" of the current channel can be copied to any other channel or all channels.

M`If there is no color in the record menu and record search, there is no recording

saved.

`"Green" stands for normal record and "yellow" stands for motion record.

English _3

Basic System Configuration- You can set date, time, date format, time

format, language, video format and menu timeout.

Network Setup (DHCP). In DHCP mode, the router will automatically allo-

cate IP address to the DVR. If the DVR fails to obtain an IP address, refer

to the DVR Router Guide. If the problem still cannot be resolved, contact

technical support.

Email Setting. Receive or Send DVR alarm email and set parameters like

email address, SSL, email enable, and interval.

• Encryption: Disable, SSL, TLS and Auto optional. Auto means it can

detect the encryption type automatically. It is recommended to set the

encryption type as Auto.

• SMTP Port: Mail sending port used by SMTP (Simple Mail Transfer

Protocol). Server is generally Port 25 or Port 465 when SSL is used by

Gmail.

• SMTP Server: Enter the address of the server for the mailbox in use.

• User Name: Enter a server to connect to. For example, email “aaa@

gmail.com” should correspond to server “smtp.gmail.com”

• Password: Enter the password of the SMTP server user.

• Sender Address: Sender's email address, which must correspond to the server used. For example, email "aaa@gmail.

com" should correspond to server "smtp.gmail.com".

• Receiver 1/2/3: Recipient’s mail address, used to receive alarm image and message from DVR side. If system alarms

continually and sends email images frequently, save the images to another location or remove them, so as to avoid

excessive space occupation and thereby affect your normal use of mailbox.

• Time Interval: A mail will be sent every three minutes by default. If the time interval for mail notification is set too short,

email server may deem mails as junk mails, so they cannot be transferred normally.

• Click on "Test Email". If connection succeeds "Test E-mail" will be sent out.

4_ English

DDNS SETTING. User may set DDNS under network type of PPPoE/

Static/DHCP after applying dynamic domain service. User may remotely

access DVR through domain by using browser in the form of http://ap-

plied domain: mapped HTTP port number when using DDNS domain

name to access DVR.

• Server address: Select dynamic domain name server provider.

Available domain name servers (DDNS_3322, DYNDNS, NO_IP,

CHANGEIP, DNSEXIT)

• Host name: Dynamic domain name of the host obtained from dynamic

domain name service provider upon registration, for example, dvr2016.

no-ip.org.

• User Name: The user name registered upon application for dynamic

domain name.

• Password: The password set upon registration.

• Click on "Test DDNS". If connection is made, it will indicate "DDNS Test is Successful!". Perform remote access to the

DVR by using dynamic domain name, for example, http://dvr2016.no-ip.org: HTTP port number (e.g. 19010)

Click on "Save" to finish setting of startup wizard.

English _5

❒Main Interface

In real-time preview mode: right click on any area to access the desired menu. Right click on it to open a context menu. Menu items

may vary depending on the condition, such as sign-in, sign-out, split screen mode and various operation conditions.

Left click on any channel to access shortcut menu. Image capture, recording and image zoom-in are in this section.

The video recording marks are shown below

means common Recording.

means Motion detection recording.

means Motion detection without recording.

Component Name Function

1Camera Type A means AHD camera. Absence of it means 960H camera.

2Date & Time Display current date and time

3Channel Name Display channel name

4SAMSUNG Logo The logo of SAMSUNG will display only when video is loss.

5Image Capture Make a snapshot of current video

6Manual Recording Enable or disable manual recording

7Quick Playback Playback of the last five minutes of the video

8Digital Zoom-In Hold and drag mouse cursor to select a frame of current video to zoom in.

9Channel Color Setting Set hue, brightness, contrast and saturation of current channel.

0PTZ PTZ control.

!Main Menu Access the main menu

@Lock Sign out or access sign-in page.

#4-Channel Layout Display four channels of video.

$9-Channel Layout Display nine channels of video.

%12-Channel Layout Display Twelve channels of video.

1 2 3 4

! @ # $ % ^ & * ( ) a

567890

6_ English

Component Name Function

^16-Channel Layout Display sixteen channels of video.

&N-Channel Layout

Display six channels of video.

Display eight channels of video.

*Screen Mode Press this button to switch the screen mode in sequence.

(Sound Adjust volume or mute.

)Playback Replay video recorded

aInformation System Information.

M`Channel layout is different depending on the model.

Network Settings

• DNS: DNS is usually provided by local ISP. Enter the IP address of your domain name server.

• UPnP (Plug and Play): function of automatic upload from port. It is important that UPnP function be available on the router and

should be enabled before use. When UPnP is enabled, port does not need to be mapped on router.

• Tips: When settings are confirmed and saved, they will be applied after the "Exit" button is clicked.

When selecting DHCP, router will allocate IP address to the DVR auto-

matically, and the IP address allocated to DVR varies upon each start

of the DVR or DHCP server, so the corresponding IP address and port

number shall be confirmed and mapped prior to remote access to the

DVR each time. The operation procedure is as shown below:

Select DHCP and then click on Save.

Enter client port and HTTP port (they must be different from each

other).

Set the IP address obtained by DVR on router and the port set for

mapping, as detailed in router setting.

Use the IP address to perform remote access to DVR:

http://IP in public network: HTTP port (e.g. 00080)

http://IP in intranet: HTTP port (e.g. 00080) (available only in one LAN)

When choosing Static, you have to set IP address, subnet mask, gate-

way and port number. The operation procedure is as shown below:

Select Static as network type.

Set port (client port), which shall be mapped on router.

Enter HTTP port (which must be different from client port), which shall

be mapped on router.

Enter the specified IP address to this bar, which will become

the unique DVR address code in regional network, for example,

192.168.2.128 as shown below.

Subnet mask: view the router to set a same mask as that in it, or

consult your network operator.

DNS: Enter DNS (domain name server) address. View the router to set the same gateway as that , or consult your net-

work operator.

Click on "Save" to save changes.

English _7

Select PPPoE for direct dial-up in the following procedure:

Enter Client port.

Enter HTTP port (which must be different from Client port).

Enter user name and password for PPPoE, which are provided by

network operator.

Enter DNS (domain name server) address.

Click on "Save" to exit and restart it, and then the DVR will obtain an

IP address.

Perform remote access to the DVR by using the IP address followed

by port number (IP: HTTP port number).

Web Application Manager

❒Download and Installation of Plugin.

If you are using Windows 7, you may need to setup the user authority for remote control, or you may be unable to backup or record.

Vista System: Start ;Setup ;Control Panel. Set user authority in control panel as shown below.

Remove the check mark "√" in front of "Use UAC to help protect your computer" and click "OK".

WIN7

Vista

M`If the Web plugin is not downloaded successfully, please check if your browser's safety level or

firewall setting is set too high. Please open IE browser ;[Menu Bar] Tools ;Internet options ;

Security ;Internet ;Custom level ;Enable the options.

8_ English

Download and installation of plugin for IE

Enter IP address plus HTTP port of the DVR in the address bar of IE, for example,

http://192.168.2.173:80.

Click "Download" and then "Run" to begin downloading the file.

When you see the dialog box, "Do you want to run this software?", click on "Run".

Click on "Install" in the "Setup-Web Plugin" dialog box.

Close your IE browser and restart it. Enter IP address plus HTTP port of the DVR

in address bar to access the login page.

English _9

Download and installation of plugin for Mac SAFARI

Enter the IP address and HTTP port for the DVR in the address bar of Mac SAFARI

browser. For example, http://192.168.2.173:80, and click on "Download" to

download the plugin.

Locate the downloaded plugin "SurveillanceClient.dmg" and double click on it.

Install the plugin by double clicking on "SurveillanceClient.pkg".

Click on "Continue" > "Install". Enter user name and password for login to your Mac. Click on "Install" > "Close" to finish installation.

10_ English

Close your Mac Safari browser and restart it. Enter the IP address and HTTP port

for the DVR in the address bar to access login page.

M`The above instruction is to install the initial plugin. You can use the same plugin for IE, for

Google Chrome and Firefox. If plugin for windows OS was installed on IE, Firefox or Google

Chrome once, you can use IE which needs to be run as administrator, Firefox or Google

Chrome to log in to DVR.

If you use Google Chrome to log in, please use Version 41 or lower. If you use V42 to V44 to log in, you need to enable NPAPI

plugins. You can enter chrome://flags/#enable-npapi on URL bar of Google Chrome to find and enable NPAPI. Please note that it

doesn't support V45 or above.

When you download and install plugin on Firefox, please close Firefox when it is prompted to. After installation is finished, you can

restart Firefox to log in to the DVR.

When you do a firmware upgrade, please close the browsers in order to have the new plugin replace the old one. Depending on

your situation, the plugin may not be work on your browser. In this case, please install the plugin unavailable on the CD provided.

(Web_plugin_Windows_YYYY_MM_DD.exe for Windows system, and SurveillanceClient_Mac_YYYY_MM_DD.dmg for Mac).

❒Web Application Manager Login

After plugin installation, please enter user name and password, select Main Stream

or Sub Stream (In general, select main stream for intranet and sub stream for

extranet), and select language in the interface. There is an option for opening all

channel preview, select it to open all live pictures. Click Login to log in remotely

view the DVR.

❒Live Interface

This manual suits for next models

Table of contents

Other Samsung Security System manuals

Samsung

Samsung SSA-P102 User manual

Samsung

Samsung LTE eNB User manual

Samsung

Samsung SOD-14C4LN User manual

Samsung

Samsung SOD-14C4LN User manual

Samsung

Samsung SSC-21WEB User manual

Samsung

Samsung SDS-P3042 User manual

Samsung

Samsung SDH-C5100 User manual

Samsung

Samsung SDS-P4040 User manual

Samsung

Samsung SMARTCAM A1 User manual

Samsung

Samsung ADT Security Hub User manual

Samsung

Samsung SDS-P3042 User manual

Samsung

Samsung SCU-9051 User manual

Samsung

Samsung SMO-150QP User manual

Samsung

Samsung SSA-S4000 User manual

Samsung

Samsung SME-2220N Owner's manual

Samsung

Samsung SMM-15FDQ User manual

Samsung

Samsung SSA-R2010 User manual

Samsung

Samsung SSA-S2100 User manual

Samsung

Samsung SDR-B85300 User manual

Samsung

Samsung SSA-M2000 User manual

Samsung

Samsung SDH-P4041 User manual

Samsung

Samsung SCU-9051 User manual

Samsung

Samsung SEW-3037W User manual

Samsung

Samsung SDS-P4082 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual