Samsung SNV-7080 User manual

NETWORK CAMERA

User Manual SNV-7080

Trademark

is the registered logo of Samsung Techwin Co., Ltd.

The name of this product is the registered trademark of Samsung Techwin Co., Ltd.

Other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this

document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of

Samsung Techwin.

Disclaimer

Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but

no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on

the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document

without prior notice.

Warranty

If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve

the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:

If the system behaves abnormally because you run a program irrelevant to the system operation.

Deteriorated performance or natural worn-out in process of time

•

Network Camera

User Manual

English _3

●OVERVIEW

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/ accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lighting storms or when unused for

long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

10.

11.

12.

13.

14.

overview

4_ overview

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC

OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS

ON THE EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects

filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the product.

English _5

●OVERVIEW

Class construction

An apparatus with CLASS construction shall be connected to a MAINS

socket outlet with a protective earthing connection.

Battery

Batteries(battery pack or batteries installed) shall not be exposed to excessive

heat such as sunshine, fire or the like.

Disconnection Device

Disconnect the main plug from the apparatus, if it’s defected. And please call

a repair man in your location.

When used outside of the U.S., it may be used HAR code with fittings of

an approved agency is employed.

CAUTION

These servicing instructions are for use by qualified service personnel only.

To reduce the risk of electric shock do not perform any servicing other than

that contained in the operating instructions unless you are qualified to do so.

The BNC Out terminal of the product is provided for easier installation, and is

not recommended for monitoring purposes.

If you keep the BNC cable connected, a risk of lightening may cause damage

or malfunction to the product.

Please use the input power with just one camera and other devices must not

be connected.

overview

6_ overview

Please read the following recommend safety precautions carefully.

Do not place this apparatus on an uneven surface.

Do not install on a surface where it is exposed to direct sunlight, near

heating equipment or heavy cold area.

Do not place this apparatus near conductive material.

Do not attempt to service this apparatus yourself.

Do not place a glass of water on the product.

Do not install near any magnetic sources.

Do not block any ventilation openings.

Do not place heavy items on the product.

User’s Manual is a guidance book for how to use the products.

The meaning of the symbols are shown below.

Reference : In case of providing information for helping of product’s usages

Notice : If there’s any possibility to occur any damages for the goods and

human caused by not following the instruction

ÚPlease read this manual for the safety before using of goods and keep it in

the safe place.

English _7

●OVERVIEW

CONTENTS

OVERVIEW

3Important Safety Instructions

9Product Features

9Recomended PC Specifications

10 Recomended SD/SDHC Memory

Card Specifications

10 What’s Included

11 At a Glance

INSTALLATION &

CONNECTION

13 Installation

18 Inserting/Removing an SD

Memory Card

19 Memory Card Information

(Not Included)

20 Connecting with other Device

NETWORK CONNECTION

AND SETUP

23 Connecting the Camera Directly

to Local Area Networking

24 Connecting the Camera Directly

to a DHCP Based DSL/Cable

Modem

25 Connecting the Camera Directly

to a PPPoE Modem

26 Connecting the Camera to a

Broadband Router with the

PPPoE/Cable Modem

27 Buttons used in IP Installer

28 Static IP Setup

31 Dynamic IP Setup

Port Range Forward (Port Mapping)

Setup

34 Connecting to the Camera from a

Shared Local PC

34 Connecting to the Camera from a

Remote PC via the Internet

overview

8_ overview

SETUP SCREEN

45 Setup

45 Audio & Video Setup

55 Network Setup

61 Event Setup

67 System Setup

APPENDIX

72 Specification

76 Product Overview

78 Troubleshooting

80 Open Source Announcement

82 GPL/LGPL Software License

WEB VIEWER

35 Connecting to the Camera

36 Login

37 Installing ActiveX

38 Installing Silverlight Runtime

40 Using the Live Screen

43 Playback

English _9

●OVERVIEW

PRODUCT FEATURES

Full HD Video Quality

Multi-Streaming

This network camera can display videos in different resolutions and qualities

simultaneously using different CODECs.

Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

Alarm

If an event occurs, the event-related video will be transferred to the email specified by the

user or saved to the SD memory, or the event signal will be sent to the Alarm Out port.

Video Motion Detection

Detects a motion from the video before triggering an event.

Face Detection / Smart Codec

Recognizes a face from the camera input video, or transfers a clearer image of your specified area.

Auto Detection of Disconnected Network

Detects network disconnection before triggering an event.

ONVIF (Spec 1.02) Compliance

This product supports ONVIF Core Spec. 1.02.

For more information, refer to www.onvif.org.

RECOMENDED PC SPECIFICATIONS

CPU : Intel Core 2 Duo 2.4GHz or higher

Operating System : Windows XP, VISTA, 7

Mac OS

Resolution : 1280X1024 pixels or higher

RAM : 2GB or higher

Web Browser : Internet Explorer 7.0 or higher, Firefox, Chrome, Safari

Neither a beta test version unlike the version released in the company website nor the developer version will

be supported.

On Firefox v3.5 or higher, displaying warning message dialog may cause an error.

If connecting to IPv6 in Windows XP, it can cause some problem.

It is recommended to connect to IPv6 in Windows 7.

Video Memory : 256MB or higher

If the driver of the video graphic adapter is not installed properly or is not the latest version, the

video may not be played properly.

•



•

J

overview

10_ overview

RECOMENDED SD/SDHC MEMORY CARD

SPECIFICATIONS

2GB ~ 32GB

To ensure proper recording of video data, it is recommended you use a memory card that

supports at least read/write speed 10Mbps and Class 6.

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Appearance Item Name Quantity Description

User Manual,

Installer S/W DVD,

CMS S/W DVD

Quick Guide 1

Template 1 Product installation guide

ASSY-Tapping Screw 4 Used for installation on the wall or ceiling

L Wrench 1 Used to remove/fix the dome cover

Plastic Anchor 4 For fixing a screw, Inserted in a hole

(reinforced anchoring force)

Machine Screws 4

Used for assembling the dome case when

installing the product on the pipe, wall

mount, etc. or blocking a hole.

Cable for the testing monitor 1 Used to test the camera connection to a

portable display device

•

Table of contents

Other Samsung Security Camera manuals

Samsung

Samsung SNB-7000 User manual

Samsung

Samsung SOD14DC User manual

Samsung

Samsung SNC-B5395 User manual

Samsung

Samsung SCC-C6413P User manual

Samsung

Samsung SCV-2081R User manual

Samsung

Samsung SCC-B5395 User manual

Samsung

Samsung iPolis SNV-7080R User manual

Samsung

Samsung SCP-2370TH User manual

Samsung

Samsung SCB-6001 User manual

Samsung

Samsung STC-14 User manual

Samsung

Samsung SCZ-3370 User manual

Samsung

Samsung SNC-L200 User manual

Samsung

Samsung SCC-C6407(P) User manual

Samsung

Samsung SCP-3430(P) User manual

Samsung

Samsung SCC-C6453P User manual

Samsung

Samsung SCC-C6405 User manual

Samsung

Samsung SID-50 User manual

Samsung

Samsung SCC-B2313 User manual

Samsung

Samsung SNZ-6320 User manual

Samsung

Samsung WV SCP-2270H User manual

Samsung

Samsung SHC-721N User manual

Samsung

Samsung iPolis SNB-5000 User manual

Samsung

Samsung SMARTCAM SNH-1011N User manual

Samsung

Samsung SCC-B5313 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Vitek

Vitek VTC-C544 Specifications

Lumens

Lumens VC-A50PNW installation guide