Samsung SNB-2000P User manual
NETWORK CAMERA
User Manual SNB-2000(P)
2_ overview
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a
risk of electric shock is present within this unit.
This symbol indicates that there are important
operating and maintenance instructions in the literature
accompanying this unit.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture.
To prevent injury, this apparatus must be securely attached to the floor/
wall in accordance with the installation instructions.
If this power supply is used at 24V ac, a suitable plug adapter should be
used.
The camera is to be only connected to PoE networks without routing to
the outside plant.
WARNING
Be sure to use only the standard adapter that is specified in the
specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to
the product.
Incorrectly connecting the power supply or replacing battery may cause
explosion, fire, electric shock, or damage to the product.
Do not connect multiple cameras to a single adapter. Exceeding the
capacity may cause abnormal heat generation or fire.
Securely plug the power cord into the power receptacle. Insecure
connection may cause fire.
y
y
y
y
1.
2.
3.
4.
overview
English _3
●OVERVIEW
When installing the camera, fasten it securely and firmly. The fall of
camera may cause personal injury.
Do not place conductive objects (e.g. screwdrivers, coins, metal parts,
etc.) or containers filled with water on top of the camera. Doing so may
cause personal injury due to fire, electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. Doing so may
cause fire or electric shock.
If any unusual smells or smoke come from the unit, stop using the
product. In such case, immediately disconnect the power source and
contact the service center. Continued use in such a condition may
cause fire or electric shock.
If this product fails to operate normally, contact the nearest service
center. Never disassemble or modify this product in any way.
(SAMSUNG is not liable for problems caused by unauthorized
modifications or attempted repair.)
When cleaning, do not spray water directly onto parts of the product.
Doing so may cause fire or electric shock
Do not expose the product to the direct airflow from an air conditioner.
Otherwise, it may cause moisture condensation inside the Clear Dome
due to temperature difference between internal and external of the
dome camera.
If you install this product in a low-temp area such as inside a cold store,
you must seal up the wiring pipe with silicon, so that the external air can
not flow inside the housing.
Otherwise, external high, humid air may flow inside the housing, pooling
moisture or vapor inside the product due to a difference between
internal and external temperature.
5.
6.
7.
8.
9.
10.
11.
12.
overview
4_ overview
CAUTION
Do not drop objects on the product or apply strong blows to it. Keep
away from a location subject to excessive vibration or magnetic
interference.
Do not install in a location subject to high temperature (over 50°C), low
temperature (below -10°C), or high humidity. Doing so may cause fire or
electric shock.
If you want to relocate the already installed product, be sure to turn off
the power and then move or reinstall it.
Remove the power plug from the outlet when there is a lighting storm.
Neglecting to do so may cause fire or damage to the product.
Keep out of direct sunlight and heat radiation sources. It may cause fire.
Install it in a place with good ventilation.
Avoid aiming the camera directly towards extremely bright objects such
as sun, as this may damage the CCD image sensor.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily
operable at any time.
When using the camera outdoors, moisture may occur inside the
camera due to temperature difference between indoors and outdoors.
For this reason, it is recommended to install the camera indoors. For
outdoor use, use the camera with built-in fan and heater.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
English _5
●OVERVIEW
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that
may cause undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the
Canadian Interference.-Causing Equipment Regulations of
ICES-003.
overview
6_ overview
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as powersupply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
English _7
●OVERVIEW
CONTENTS
OVERVIEW
2
6Important Safety Instructions
9Product Features
9Recommended PC Specifications
10 What’s Included
11 At a Glance
INSTALLATION &
CONNECTION
13
13 Mounting the lens
15 Connecting with other Device
CAMERA SETUP
17
17
How to use the Keyboard Controller
18 Main Menu
18 Profile
19 Camera Setup
23 Privacy Zone
24 Others
25 System Info
NETWORK CONNECTION
AND SETUP
26
26 Connecting the Camera to an
Broadband Router with the
xDSL/cable Modem
27 Connecting the Camera to an
Broadband Router with Local
Area Networking
28
Connecting the Camera Directly to
a DHCP-based xDSL/cable Modem
29 Connecting the Camera Directly
to Local Area Networking
30 IP Address Setup
31 Static IP Setup
34 Dynamic IP Setup
35 Port Range Forward (Port
Mapping) Setup
35 Connecting to the camera from a
shared local PC
36 Connecting to the camera from a
remote PC via the Internet
overview
8_ overview
WEB VIEWER
37
37 Connecting to the camera
38 Login
39 Installing ActiveX
40 Using the Live Screen
41 Backup
SETUP SCREEN
43
43 Accessing the Setup screen
44 Default Setup
48 System Setup
51 Overlay Setup
52 Event Setup
58 Network Setup
APPENDIX
59
59 Profile
60 Terminology
61 Specifications
65 Frame Rate (NTSC)
71 Frame Rate (PAL)
77 Troubleshooting
79 GPL/LGPL Software License
English _9
●OVERVIEW
PRODUCT FEATURES
Support various communication protocols
Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various
internet protocols such as ARP, HTTP, HTTPS and DHCP.
Web Browser-based Monitoring
Using the Internet web browser to display the image in a local network environment.
Automatic Local IP Setup
Even a network novice can install it with minimum operations.
Alarm
If the camera equipped with an alarm sensor senses any motion, it will send a notification
to a user FTP/email account (SMTP) or send the corresponding signal to the Alarm Out
terminal.
Motion Detection
If the camera with a specified motion area detects a motion in that area, it will send a
notification to a user FTP/email account (SMTP) or send the corresponding signal to the Alarm
Out terminal.
ONVIF (Spec 1.01) Compliance
This product supports ONVIF Core Spec. 1. 01.
For more information, refer to www.onvif.org.
RECOMMENDED PC SPECIFICATIONS
CPU : Pentium4 / 2.4GHz or higher
Operating System : Windows XP(Service Pack2, Service Pack3) / Windows Vista / Windows 7
Resolution : 1024X768 pixels or higher
RAM : 512MB or higher
Web Browser : Internet Explorer 6.0 or higher
Video Card : Radeon, Nvidia
Video Memory : 128MB
DirectX 8.1 or higher
Compatible Broadband Router
Linksys
D-Link
Netgear
Compatible PoE Switches
Linksys SRW224G4P
D-Link DES-1316
SMC SMCPWR-INJ3
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
overview
10_ overview
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
Camera C Mount Adapter
Auto Iris Lens Connector
Camera Holder (Mount)
& Screws (2EA)
User Manual,
Installer S/W CD,CMS S/W DVD Quick Guide
Lens Options
CS Lens C Lens
This manual suits for next models
1
Table of contents
Other Samsung Security Camera manuals
Samsung
Samsung SIR-4260V User manual
Samsung
Samsung Beyond SCB-5003 User manual
Samsung
Samsung SID-42CN User manual
Samsung
Samsung SCC-C6439P User manual
Samsung
Samsung SHC-721N User manual
Samsung
Samsung SCC-B5353 User manual
Samsung
Samsung SCC-B9372 User manual
Samsung
Samsung SCC-B2315 User manual
Samsung
Samsung SID-460 User manual
Samsung
Samsung SID-450 User manual
Samsung
Samsung SCC-B9371 User manual
Samsung
Samsung SDC-241 SERIES User manual
Samsung
Samsung SCD-5083 User manual
Samsung
Samsung SUD-2080 User manual
Samsung
Samsung SDC-313 SERIES User manual
Samsung
Samsung SCC-B5394 User manual
Samsung
Samsung SVD4600 Series User manual
Samsung
Samsung SCZ-3430N User manual
Samsung
Samsung SCC-B5397 User manual
Samsung
Samsung SCC-ZM395 User manual
