Samsung 500N - CLP Color Laser Printer User manual
COLOR LASER PRINTER
Setup Guide
S
ETUP
G
UIDE
2
C
ONTENTS
Step 1.
Unpacking ............................................. 3
Step 2.
Understanding Your Printer ................... 5
Step 3.
Installing the Imaging Unit Transfer Belt
and Toner Cartridges ............................. 7
Step 4.
Loading Paper ..................................... 16
Step 5.
Connecting a Printer Cable .................. 19
Using a Parallel Cable .................................19
Using a USB Cable .....................................20
For Networking Printing ..............................21
Step 6.
Turning the Printer On ........................ 22
Step 7.
Printing a Demo Page .......................... 23
Step 8.
Changing the Display Language .......... 23
Step 9.
Installing the Printer Software ............ 24
Installing Printer So tware in Windows ..........24
Reinstalling Printer so tware ........................26
Removing Printer so tware ..........................26
Changing the Display Language ...................26
Step 10.
Viewing the User’s Guide ................... 27
In Windows ..............................................27
In Linux ...................................................28
S
ETUP
G
UIDE
3
English
Step 1.
Unpacking
1
Remove the printer and all o the accessories rom the
packing carton. Make sure that the printer has been packed
with the ollowing items:
N
OTES
:
• I any items are missing or damaged, noti y your dealer
immediately.
• Components may differ from one country to another.
• The CD-ROM contains the printer driver, the User’s Guide, and
the Adobe Acrobat Reader program.
• The power cord may be di erent depending on your country.
C
AUTION
:
This printer weighs 35kg including developer cartridge
and cassette. Use sa e li ting and handling techniques. I you need
to move the printer it must be moved by two people. Use the
li ting handles located as shown in the diagram (see page 5). Back
injury could be caused i a single person attempts to li t the
printer.
Toner Cartridges Power Cord Trans er Belt
Imaging Unit CD-ROM Setup Guide
SyncThru CD-ROM
(CLP-500N only)
SyncThru Quick Guide
(CLP-500N only)
S
ETUP
G
UIDE
4
2
Care ully remove all o the packing tapes rom the printer.
3
Pull the paper tray out o the printer and remove the
packing tapes rom the tray.
4
Select a location or the printer:
•Leave enough room to open the printer trays, covers, and
allow or proper ventilation.
•Provide the proper environment:
– A irm, level sur ace
– Away rom direct air low o air conditioners, heaters, or
ventilators
– Free o temperature, sunlight, or humidity extremes or
luctuations
– Clean, dry, and ree o dust
C
AUTION
:
You must place your printer in the level sur ace. I you
do not, the print quality problems can occur.
S
ETUP
G
UIDE
5
English
Step 2.
Understanding Your Printer
These are the main components o your printer:
Output Support
Control Panel
(re er to Chapter
5 in the User’s
Guide which is
on the CD-
ROM.)
Paper Output Tray
Top Cover
(Open to install the imaging unit,
and trans er belt.)
Front Cover
(Open to replace
the waste toner
container.)
Left Cover
(To install the toner cartridges
press the top cover release
button and open ully.)
Tray 1
(250-sheet paper eeder)
Top Cover
Release Button
Optional Tray 2
(500-sheet paper eeder)
Handle
(Li ting handles are
located at the lower
edge o both sides
o the printer.)
S
ETUP
G
UIDE
6
Optional Tray 2 Jam Cover
(Open to remove jams in the optional tray 2.)
Muti-purpose Tray
(Open to load special print materials.)
Right Cover
(Open to remove paper jams.)
Power Switch
USB Port
Power Receptacle
Control Board
Cover
(Open to install optional
accessories.)
Wireless Network
Antenna
*
Network Port
**
Parallel Port
***
* This wireless network port is not supplied with the printer. It is an option that must be purchased and
installed separately.
** The network port is fitted as standard on the CLP-500 . CLP-500 users can purchase and install
separately an optional etwork Card. For details, see the User's Guide of the printer in the CD-ROM.
*** The parallel port may not be available depending on your country.
Handle
(Use it to li t the printer.)
S
ETUP
G
UIDE
7
English
Step 3.
Installing the Imaging Unit Transfer
Belt and Toner Cartridges
1
Using the handle, completely open the le t cover until it is at
right angles to the main rame.
C
AUTION
:
I the le t cover is not completely open, the top cover
release button does not press.
2
Press the top cover release button to unlatch the top cover
and open it all the way.
Top cover release
button
S
ETUP
G
UIDE
8
3
Take the imaging unit out o the package using the handle.
4
Remove the paper covering the imaging unit by removing
the tape under the handle o the imaging unit.
CAUTIONS
:
• Do not use sharp objects, such as a kni e or scissors, to open the
imaging unit package and tape on the protective paper liner. You
could damage the sur ace o the imaging unit.
• To prevent damage, do not expose the imaging unit to light or
more than a ew minutes. Cover it with black paper, i necessary.
• Do not touch the sur ace o the green roller on the imaging unit
or print quality problems can occur.
5
Locate the imaging unit slots inside the printer, one on each
side.
S
ETUP
G
UIDE
9
English
6
Hold the handle on the imaging unit with the green roller
acing you. Align the imaging unit with the slots in your
printer so that the colors on both sides o the imaging unit
slide into the corresponding colors o the slots.
CAUTION
:
Insert the imaging unit care ully so as not to scratch
and damage the sur ace o the green roller.
7
Slide the imaging unit down into the printer until it cannot
be pushed in any urther and old the handle down.
CAUTION
:
To prevent damage, do not expose the imaging unit
to light or more than a ew minutes. Close the top and le t
cover should the setup need to be halted or any reason.
S
ETUP
G
UIDE
10
8
Take the trans er belt out o the package.
9
Remove the paper covering the trans er belt by removing
the tape.
CAUTION
:
Don’t use sharp objects, such as a kni e or scissors, to
open the trans er belt package. You could damage the sur ace o
the trans er belt.
10
Pinch the trans er belt tention levers on both sides o the
trans er belt. Then, pull them out, as shown below.
11
Locate the trans er belt slots inside the printer, one on each
side.
Other manuals for 500N - CLP Color Laser Printer
2
This manual suits for next models
4
Table of contents
Other Samsung Printer manuals
Samsung
Samsung CLP 350N User manual
Samsung
Samsung ML 1710 - B/W Laser Printer User manual
Samsung
Samsung Xpress CLP-680 series User manual
Samsung
Samsung Bixolon SRP-270 User manual
Samsung
Samsung Bixolon SRP-270 User manual
Samsung
Samsung ML-2251NP - Network Business Laser Printer User guide
Samsung
Samsung Xpress M2021 User manual
Samsung
Samsung ML-5200A User manual
Samsung
Samsung ML-1200 Series User manual
Samsung
Samsung ML-1615 User manual
Samsung
Samsung CLX-8640ND User manual
Samsung
Samsung ML-6512ND SERIES User manual
Samsung
Samsung SRP-250 Series User manual
Samsung
Samsung Xpress M2625D User manual
Samsung
Samsung SCX-4200/XAZ User manual
Samsung
Samsung ML-1200 Series User manual
Samsung
Samsung ML 2150 - B/W Laser Printer User manual
Samsung
Samsung SL-M3325ND/SEE User manual
Samsung
Samsung SRP-350U User manual
Samsung
Samsung ML-3310D User manual
