Samsung PN58A550S1F User manual
1
Samsung TV
F/W Upgrade Guide
Samsung Electronics
PN50A550S1FXZA, PN58A550S1FXZAP550
Model CodeSeries (P5)
2
Notice: Please read completely prior to upgrade
¾There are two separate firmware packages required to
complete the upgrading process of the P550 series:
Version 1005.2 or higher for the main processor
P550 firmware 1005.2.exe
Version 1005.3 for the sub processor
P550 firmware 1005.3.exe
¾First determine what the current firmware version is for the
main processor (see below). If the version is 1005.2 or higher
proceed to Step 2 and upgrade the sub processor with 1005.3.
¾How to check the firmware version
User Menu -> Setup -> SW Upgrade
When highlighted the “SW Upgrade”, press the “Info” button on Remote
TV F/W Version : XXXX
3
Step1. Upgrade the firmware version 1005.2
2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file
P550 firmware 1005.2.exe.
1. Save the firmware file onto your computer.
File : P550 firmware 1005.2.exe
4. Press “Unzip” button. 5. Unzipping is in progress.
6. After completing, press
“OK” and “Close” button.
7. The USB driver should contain one folder
named T-SPNAUS
8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
4
9. Turn your TV on, and then insert
the USB Memory Drive containing
the firmware upgrade into the
WISELINK port at Side-AV Panel.
NOTE: If you get the “WiseLink” on-
screen selection menu, select “NO”
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
10. Press the Menu button on your
Remote Control.
11. Go to Setup.
On the Setup Menu,
select SW Upgrade, and then
press Enter or the arrow button
(▶) on your remote.
12. The TV will scan the USB Memory
Drive.
5
13. When the software upgrade is
complete; the TV will turn off and
then back on by itself.
Proceed with the ‘Plug & Play’
setup.
14. Once ‘Plug & Play’ is complete;
“Enjoy your watching.” is displayed.
Press the ‘Enter’ key and you are
done.
You can find more information in
User Manual.
※Do not pull the USB drive out and
unplug the power cable until
complete
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
6
Step2. Upgrade the firmware version 1005.3
3. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
4. Go to the USB Memory Drive and then double click the file
P550 firmware 1005.3.exe.
2. Save the firmware file onto your computer.
File : P550 firmware 1005.3.exe
5. Press “Unzip” button. 6. Unzipping is in progress.
7. After completing, press
“OK” and “Close” button.
8. The USB driver should contain one folder
named ‘T-SPNAUS’
9. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
1. If you completed Step 1 from above, remove the File and Folder (listed
below) on your USB drive.
File : P550 firmware 1005.2.exe
Folder : T- SPNAUS
7
10. Turn your TV on and insert
the USB Memory Drive containing
the firmware upgrade into the
WISELINK port at the Side-AV panel.
NOTE: If you get the “WiseLink” on-
screen selection menu, select “NO”
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
11. Press the Menu button on your
Remote Control.
12. Go to Setup.
On the Setup Menu,
select SW Upgrade, and then
press Enter or the arrow button
(▶) on your remote.
13. The TV will scan the USB Memory
Drive.
8
14. When the software upgrade is
complete the TV will turn off and
then back on by itself.
Proceed with the ‘Plug & Play’
setup
15. Once ‘Plug & Play’ is complete;
“Enjoy your watching.” is
displayed. Press the ‘Enter’ key
and you are done.
You can find more information in
User Manual.
※Do not pull the USB drive out and
unplug the power cable until
complete
※Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has smaller version
number than the version on your TV, do not install it.
This manual suits for next models
3
Table of contents
Other Samsung Flat Panel TV manuals
Samsung
Samsung BN68-02714F-02 Installation and operation manual
Samsung
Samsung LED 7450 User manual
Samsung
Samsung LN19B650 - 19" LCD TV User manual
Samsung
Samsung FP-T5094W User manual
Samsung
Samsung LT-P326W Instruction Manual
Samsung
Samsung UN75F8000XZA Guide
Samsung
Samsung PPM42M8HB User manual
Samsung
Samsung PN50A410C1D User manual
Samsung
Samsung LN26C350D1D User manual
Samsung
Samsung PN42C450B1D User manual
Samsung
Samsung PC490-ZC User manual
Samsung
Samsung 5070 Series User manual
Samsung
Samsung LN26C450E1D User manual
Samsung
Samsung LN40B50 User manual
Samsung
Samsung LW22A13W Quick start guide
Samsung
Samsung UN40B6000 - 40" LCD TV User manual
Samsung
Samsung LNS2352WX User manual
Samsung
Samsung 800 PN42A450PD User manual
Samsung
Samsung UN19C4000PD User manual
Samsung
Samsung CT-21K40ML User manual
