Samson Graphite MF8 User manual

Quick Start Guide

Samson Technologies

278-B Duffy Ave

Hicksville, New York 11801

Phone: 1-800-3-SAMSON (1-800-372-6766)

www.samsontech.com

Apple, Mac, Mac OS, and iPad are trademarks of Apple Inc., registered in the U.S. and

other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and

is used under license.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to

alert the user to the presence of non-insulated “dangerous voltage” within the product’s

enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance instructions in the literature accompa-

nying the appliance.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD. DO NOT USE THIS PLUG WITH AN EXTEN-

SION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD.

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL

SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND FULLY INSERT.

ATTENTION

RISQUE D’ÉLECTROCUTION !

NE PAS OUVRIR !

Graphite MF8 · USB Control Surface

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

CAUTION

Any changes or modiﬁcations to the construction of this device which are not expressly

approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or tele-

vision reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

If you want to dispose this product, do not mix it with general household waste.

There is a separate collection system for used electronic products in accordance

with legislation that requires proper treatment, recovery and recycling.

Private household in the 28 member states of the EU, in Switzerland and Norway

may return their used electronic products free of charge to designated collection facilities

or to a retailer (if you purchase a similar new one).

For Countries not mentioned above, please contact your local authorities for a correct

method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment,

recovery and recycling and thus prevent potential negative effects on the environment and

human health.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufactur-

er’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including ampliﬁers) that produce heat.

9. Only use attachments/accessories speciﬁed by the manufacturer.

10. Use only with the cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

11. Unplug the apparatus during lightning storms, or when unused for long periods

of time.

12. Refer all servicing to qualiﬁed personnel. Service is required when the apparatus

has been damaged in any way, such as power supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus has been exposed

to rain or moisture, does not operate normally, or has been dropped.

13. This appliance shall not be exposed to dripping or splashing water and that no

object ﬁlled with liquid such as vases shall be placed on the apparatus.

14. Caution-to prevent electrical shock, match wide blade plug wide slot fully insert.

15. Please keep a good ventilation environment around the entire unit.

16. Always unplug cables by gripping the plug ﬁrmly, not by pulling on the cable.

Important Safety Information

Graphite MF8 · USB Control Surface

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

Introduction

Thank you for purchasing the Samson Graphite MF8, compact USB control surface! The

Graphite MF8 gives you the performance and production control to easily integrate with

Windows or Mac digital production workstations. The controller can also be powered

directly by an Apple iPad (using the Apple iPad Camera Connection Kit or Lightning to

USB Camera Adapter, not included), to be used to control many iOS MIDI applications.

The Graphite MF8 is a full-featured control surface with eight channels with volume

faders, pan knobs, solo/mute and record arm buttons, as well as transport controls. For

expanded control the controller has ﬁve programmable function buttons, an assignable

master encoder and crossfader. Five presets provide access to additional layers of control.

To take full advantage of adjusting parameters and saving presets, you will need to

download the free Graphite Mini computer editor from the Samson website

(www.samsontech.com)

In these pages, you’ll find a detailed description of the features of the Graphite MF8

control surface, as well as a guided tour of its control panel, and instructions for setup

and use. You’ll also find a warranty card enclosed. Please don’t forget to fill it out and

mail it in so that you can receive online technical support, and so that we can send you

updated information about this and other Samson products in the future.

We recommend you record your serial number in the space provided below, for future

reference.

Serial number: ____________________________________________

Date of purchase: __________________________________________

With proper care and maintenance, your Graphite MF8 will operate trouble-free for many

years. Should your controller ever require servicing, a Return Authorization (RA) number

must be obtained before shipping your unit to Samson. Without this number, the unit

will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for an

RA number prior to shipping your unit. Please retain the original packing materials and,

if possible, return the unit in its original carton. If your Graphite MF8 was purchased

outside of the United States, contact your local distributor for warranty details and service

information.

The Samson Graphite MF8 utilizes state-of-the-art technology and is engineered to the

ﬁnest detail. Here are some of its main features:

• Eight assignable channel faders and knobs

• Channel Solo/Mute and Record Arm buttons

• Master encoder

• Crossfader

• Five assignable function buttons

• Transport controls

• Five global Presets for extended control

• Channel up and down buttons for shifting the eight channels’ control area in

software

• Compact design, perfect for live performance and studio applications

• USB plug and play and bus powered

Features

Graphite MF8 · USB Control Surface

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

System Components

• Samson Graphite MF8 USB Controller

• One (1) USB Cable

• Graphite MF8 Owner’s Manual

Minimum System Requirements

Windows (PC)

• Windows XP/Vista/Win 7/Win 8

• 800MHz or higher, 256MB RAM or larger, USB port

Mac OS

• Mac OS X 10.4.9 or higher

• 733MHz or higher, 512MB RAM or larger, USB port

Apple iPad

• iOS v4.2 or higher

Quick Start

1. Connect the Graphite MF8 to your computer or iPad* using the supplied USB

cable. The unit will receive power and transmit MIDI data via the USB connection.

If the Graphite MF8 is connected to a non-powered USB hub, it may not receive

enough power to turn on. It is recommended that you connect the Graphite MF8

directly to your computer or to a powered USB hub.

2. Launch your DAW or virtual instrument software.

3. Set the Graphite MF8 as the MIDI Input and MIDI Output device.

*To connect directly to an iPad, you will need to use the Apple iPad Camera Connection

Kit or Lightning to USB Camera Adapter (not included).

Computer

Table of contents

Languages:

Other Samson Controllers manuals

Samson

Samson EB 8315 EN User manual

Samson

Samson 3273 Service manual

Samson

Samson TROVIS 5571 Service manual

Samson

Samson TROVIS 6495 Series Service manual

Samson

Samson TROVIS 5500 User manual

Samson

Samson TROVIS 5500 Service manual

Samson

Samson 2371-10 Service manual

Samson

Samson 2780-1 Service manual

Samson

Samson 3271-5 Service manual

Samson

Samson EB 31a Service manual

Samson

Samson 2357-11 Service manual

Samson

Samson 3730-4 User manual

Samson

Samson 3767 Service manual

Samson

Samson 3375-10 Setup guide

Samson

Samson TROVIS 3730-1 Service manual

Samson

Samson 3374 Service manual

Samson

Samson 3730 Series Service manual

Samson

Samson Trovis 6493 Service manual

Samson

Samson TROVIS 5757-7 Service manual

Samson

Samson SS AT054U Service manual

Samson

Samson 3372 Service manual

Samson

Samson 42-36 Service manual

Samson

Samson Type 5824 Service manual

Samson

Samson TROVIS 5433 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide