Russell Hobbs RHI392 Guide

WARRANTY AND INSTRUCTION

RUSSELL HOBBS STEAM, SPRAY, DRY IRON

RHI392

Congratulations on purchasing your Russell Hobbs Iron. Each unit is manufactured

to ensure safety and reliability. Before using this appliance for the first time, please

read the instruction manual carefully and keep it for future reference.

FEATURES OF THE RUSSELL HOBBS STEAM, SPRAY, DRY IRON

•1600W

•Dry, steam, and spray ironing

•Powerful burst of steam

•Vertical Steam

•Self-Cleaning, anti-calk, anti-drip

•Convenient swivel cord with a cord wrap area

•Overheat safety protection circuit

•Ceramic soleplate

•Includes 50ml water measuring cup

•With indicator light and heel rest

•Water spray feature

•Anti-drip feature

•Anti-calcium feature

•Vertical steam feature, ideal for suits, dresses and delicate fabrics

•High wattage for faster heat-up time and performance

•Adjustable thermostat and steam control

•Fabric temperature guide

•Self-cleaning

•Soft grip handle

•230ml Water tank capacity

•Handy long 1.5m power cord

•For domestic use only

•1 year warranty

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be

followed including the following:

1. Please read the instructions carefully before using any appliance.

2. Always ensure that the voltage on the rating label corresponds to the mains

voltage in your home.

3. Make sure to unplug the appliance from the socket when leaving the iron even for

a short while, and stand the iron upright

4. The iron will be of high temperature when used, never touch it with hand or close

to the flammable product in order to avoid an accident.

5. Incorrect operation and improper use can damage the appliance and cause injury

to the user.

6. The appliance is intended for household use only. Commercial use invalidates the

warranty and the supplier cannot be held responsible for injury or damage caused

when using the appliance for any other purpose than that intended.

7. Avoid any contact with moving parts.

8. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

9. Children should be supervised to ensure that they do not play with the appliance.

10. Check the power cord and plug regularly for any damage. If the cord or the plug

is damaged, it must be replaced by the manufacturer or a qualified person in order to

avoid an electrical hazard.

11. Do not use the appliance if it leaks, has been dropped or damaged in any way. In

case of damage, take the unit in for examination and/or repair by an authorised

service agent

12. To reduce the risk of electric shock, do not immerse or expose the motor/

electrical assembly, plug or the power cord to water or any other liquid.

13. Never immerse the unit in water or any other liquid for cleaning purposes.

14. Remove the plug from the socket by gripping the plug. Do not pull on the cord to

disconnect the appliance from the mains. Always unplug the unit when not in use,

before cleaning or when adding or removing parts.

15. The use of accessory attachments that are not recommended or supplied by the

manufacturer may result in injuries, fire or electric shock.

16. A short cord is provided to reduce the hazards resulting from becoming

entangled in or tripping over a longer cord.

17. Do not let the cord hang over the edge of a table or counter. Ensure that the cord

is not in a position where it can be pulled on inadvertently.

18. Do not allow the cord to touch hot surfaces and do not place on or near

flammable goods, near an open flame, hot gas or electric burner or a heated oven.

19. Use of an extension cord with this appliance is not recommended. However, if it

is necessary to use an extension cord, ensure that the cord is suited to the power

consumption of the appliance to avoid overheating of the extension cord, appliance

or plug point. Do not place the extension cord in a position where it can be pulled on

by children or animals or tripped over.

20. This appliance is not suitable for outdoor use. Do not use this appliance for

anything other than its intended use.

21. DO NOT carry the appliance by the power cord.

22. Always operate the appliance on a smooth, even, stable surface. Do not place

the unit on a hot surface.

23. Ensure that the switch is in the “0” or “OFF” position after each use.

24. Don’t iron clothing while it’s being worn – you’ll burn or scald the wearer.

25. Don’t touch the soleplate and keep away from the steam emitting from it.

26. Take care when emptying the iron – it may contain hot water.

27. Don’t use the iron in the vicinity of children.

28. Use the iron on a stable, level, heat-resistant surface, preferably an ironing

board.

29. Don’t leave the iron unattended while plugged in, or while it’s standing on the

ironing board. It could be knocked over by you, by a child or by a pet.

30. Don’t fill the iron directly from the tap, use the water beaker provided.

31. Don’t fill past the MAX level mark shown on the water tank or water leak from the

iron during use.

32. Deposits or minerals in the water supply will generate scale and block the steam

holes in the soleplate. It is advisable to use distilled water when filling your iron. Do

not use chemically distilled water.

33. Leave the iron upright to cool down fully before cleaning and storing away.

34. Don’t use the iron for any purpose other than those described in these

instructions.

35. Take care not to scratch the soleplate – avoid buttons, zips, etc.

36. When placing the iron on its heel rest, ensure that the surface on which is has

been placed is clean and stable.

37. The iron has a protective thermal fuse, which will blow if it overheats. If this

happens, the iron will stop working and must be returned for repair.

38. Always unwind and straighten the power cord before use.

39. Unplug the iron from the mains electrical supply before:

•Cleaning

•Filling with water or emptying the water tank

•Immediately after use

•When not in use

•When moving

40. The appliance generates high temperature steam. Always handle with care

and warn other users of potential danger.

41. The iron is not to be used if it has been dropped , if there are visible signs of

damage or if it is leaking

42. Don’t let the power cord touch the soleplate as it may result in damage as well as

a potential fire hazard.

43. Empty the water tank after each use.

44. Do not add perfume, vinegar or other chemical liquids into the water tank as they

may result in damage to the appliance.

45. Do not operate this appliance by means of an external timer.

46. The manufacturer does not accept responsibility for any damage or injury caused

by improper or incorrect use, or for repairs carried out by unauthorised personnel.

47. In case of technical problems, switch off the appliance and do not attempt to

repair it yourself. Return the appliance to an authorised service facility for

examination, adjustment or repair. Always insist on the use of original spare parts.

Failure to comply with the above mentioned pre-cautions and instructions, could

affect the safe operation of this appliance.

A. Front tip

B. Spraying nozzle

C. Water tank

D. Water filling cover

E. Spray button

F. Steam button

G. Handle

H. Flexible cord protector

I. Rear cover

J. Power indicator light

K. Steam knob/Self cleaning

L. Temperature dial

OPERATING INSTRUCTIONS

BEFORE FIRST USE

Remove any protective films or stickers from the soleplate and the Iron’s body. Wipe

the soleplate with a dry soft cloth. Unwind and straighten the power cord. Fill the

iron as described in the section “How to Fill the Water Tank”. Connect the appliance

to a suitable mains power supply outlet. Turn the Temperature Dial to the MAX

position; the pilot light will glow to indicate that the iron is heating up. Once the pilot

light goes off, then the required temperature is reached. Move the steam knob to the

ON position - steam starts to come out from the vents on the soleplate. Begin first

time ironing with an old towel. When the water tank is empty and there is no more

steam that can be produced; the preparation work is completed. The iron is now

ready for proper use.

Note: It is normal for small amount of smoke to be produced the first time you use

the iron, this will quickly disappear. When using the steam function for the first time,

do not direct the steam towards the laundry, as there could be debris from the steam

vents.

HINTS AND TIPS FOR IRONING

1. Sort the articles to be ironed according to the type of fabric. This will minimize the

frequency of temperature adjustment for different garments.

2. Start ironing the fabrics requiring the lowest temperature and progress to the

higher ones because the iron heats up quicker than it cools down.

3. “Test iron” a small area on the backside or inside of the garment if you are unsure

about the type of fabric. Start with a low temperature and increase gradually.

4. Wait for about three (3) minutes before ironing heat sensitive fabrics. ‘Temperature

adjustment’ will need a certain time to reach the required level no matter if it is higher

or lower.

5. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth

to prevent shine marks.

6. You may need to press the steam button a few times to activate the steam burst

function.

7. Always keep the soleplate smooth – avoid contact with sharp, hard, metal objects.

READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S

IRONING INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR

TO THE FOLLOWING:

Caution：

Please note that on the label means that this article

may not be ironed.

Instructions on

Label

Type of Fabric

Thermostat Dial

Nylon

Silk

MIN

MAX

Wool

Cotton

Linen

NOTE: If the fabric consists of various kinds of fabrics, always select the temperature

required by the most delicate fabrics.

HOW TO FILL THE WATER TANK

1. Disconnect the appliance from main power supply outlet.

2. Ensure that the temperature dial and steam knob are in the “MIN” and “OFF” positions.

3. Open the water inlet cover.

4. Place the iron on its heel rest and tilt forward approximately at a 45 degree angle.

5. Fill water through the water-filling inlet hole up to the MAX level mark indicated on the

side of the iron/ water tank. Never fill above this mark.

6. Close the water inlet cover and wipe off any spillages on Iron.

Note: For the best result, it is advisable to use de-mineralized water or distilled water. Do

not use chemically de-scaled water or any other liquids.

WATER SPRAY FUNCTION

This function can be used at any time and it does not affect other functions. Press the spray

button to spray water on clothes, as often as required.

NOTE: When using the water spray function, ensure that there is enough water in the water

tank. You may have to pump the spray button several times during first use in order to start

the spraying function.

DRY IRONING

This function irons without the use of steam.

1. Connect the iron with a suitable mains power supply outlet.

2. Set the steam knob to position “0”/ “no steam”/ “OFF”.

3. Turn the temperature dial to the correct ironing temperature according to the

recommendation of the garment label.

4. The pilot light will glow to indicate that the iron is heating up.

5. When the required temperature is reached, the pilot light goes off. The iron is ready to

use.

6. After use, turn the temperature dial to the “0”/ “OFF”/ “MIN” position to switch off.

7. Disconnect the iron from mains power supply outlet.

8. Follow cleaning and maintenance instructions.

STEAM IRONING

This function can only be used at a higher ironing temperature – moderate or max position.

1. Fill the iron as described in "How to Fill the Water Tank".

2. Connect the iron to a suitable mains power supply outlet.

3. Turn the temperature dial to the MAX position.

4. The pilot light will glow to indicate that the iron is heating up.

5. The pilot light will go off when the required temperature is reached. During ironing, the

pilot light on the iron automatically switches on/off as the thermostat maintains the set

temperature (you may continue ironing during this process).

6. The iron is ready for use.

Caution: Synthetic fabric, Nylon, Synthetic Silk and Silk cannot be steam

ironed as it will damage the finish of the fabric.

1. After use, turn the temperature dial to the “0”/ “OFF”/ “MIN” position - the

iron is now switched off.

2. Disconnect the iron from mains power supply outlet.

3. Follow the cleaning and maintenance instructions.

Note: This iron has an anti-drip feature: if you are ironing garments for long period of

time, the soleplate temperature may decrease. The anti-drip function will ensure that

water does not leak from the soleplate during this time.

BURST OF STEAM

This function works well for tough wrinkles and heavy fabrics. By pressing the steam

button, an intense burst of steam is emitted from the soleplate. This can be very

useful when removing stubborn creases. This function can be used once the iron

has reached maximum temperature. For optimal results, there should be a five (5)

second interval between presses of the steam button. To prevent leaking water from

the soleplate, do not press the steam button continuously for more than three (3)

seconds. Allow at least a one (1) minute interval before press the steam button

again. Stubborn creases should be removed within three (3) steam button presses.

BURST OF STEAM IN VERTICAL POSITION

Burst of steam can also be applied when holding the iron

in a vertical position. This function is useful for removing

wrinkles on garments in hanging position, hanging

curtains, or other hanging fabrics.

Note: It may be necessary to press the burst of steam button few times to start this

function. During the use of ‘Burst of Steam’, stop ironing when the pilot light turns on

and then start ironing again only after the pilot light has turned off.

Table of contents

Other Russell Hobbs Iron manuals

Russell Hobbs

Russell Hobbs Accusteam Plus RHC906 Installation guide

Russell Hobbs

Russell Hobbs Supreme Steam 23393 User manual

Russell Hobbs

Russell Hobbs RHC909 Installation instructions manual

Russell Hobbs

Russell Hobbs Steam Iron User manual

Russell Hobbs

Russell Hobbs POWERSTEAM ULTRA 20630AU Installation guide

Russell Hobbs

Russell Hobbs RHI910 Installation guide

Russell Hobbs

Russell Hobbs RHI628 Installation guide

Russell Hobbs

Russell Hobbs RHI901 Installation guide

Russell Hobbs

Russell Hobbs Supreme Steam Ultra User manual

Russell Hobbs

Russell Hobbs 14845 Installation guide

Russell Hobbs

Russell Hobbs 14993 User manual

Russell Hobbs

Russell Hobbs 22470 User manual

Russell Hobbs

Russell Hobbs 14995 User manual

Russell Hobbs

Russell Hobbs 24440-56 User manual

Russell Hobbs

Russell Hobbs Diamond Elite RHC590 Installation guide

Russell Hobbs

Russell Hobbs 26731 User manual

Russell Hobbs

Russell Hobbs Easyfill User manual

Russell Hobbs

Russell Hobbs 26340-56 User manual

Russell Hobbs

Russell Hobbs Diamond Elite User manual

Russell Hobbs

Russell Hobbs Light & Easy Brights User manual

Russell Hobbs

Russell Hobbs 24430-56 User manual

Russell Hobbs

Russell Hobbs RHI002 Installation guide

Russell Hobbs

Russell Hobbs 14856 User manual

Russell Hobbs

Russell Hobbs RHI226 Installation guide

Popular Iron manuals by other brands

Clatronic

Clatronic DB 3703 instruction manual

TEFAL

TEFAL FV4093Z0 manual

Gorenje

Gorenje SIH 2200 BS instruction manual

Philips

Philips GC6012 Service manual

Bosch

Bosch 2 Series operating instructions

Riffel

Riffel Catena KB-819 instruction manual

Texi

Texi Hestia Instructions for use

Maxwell

Maxwell MW-3010 Manual instruction

TREVIDEA

TREVIDEA Girmi ST60 user manual

Philips

Philips HI5914/30 quick start guide

Primula

Primula Vapormat instruction manual

Magio

Magio MG-541 manual

Scarlett

Scarlett SC-1334S instruction manual

Bosch

Bosch Sensixx B22L manual

Philips

Philips GC651 Specifications

Vitek

Vitek VT-1247 VT Manual instruction

Cleanmaxx

Cleanmaxx 3397 instruction manual

Philips

Philips GC800 user manual