Rosewill VIPER Z User manual
VIPER
1© All rights reserved by Rosewill
User ManualVIPER Z
CASE
Contents
Open Chassis P.5
Install Power Supply P.5
Install Motherboard P.6
Install Add-in Card P.7
Disassembling Chart P.2
P.3Top I/O
P.4Accessory Box
P.8Install External 5.25" Device
P.9Install 3.5”/2.5” HDD/SSD
P.9System Ready
P.9Fan Installation
P.10Optional: Additional Fan & Liquid Cooling Radiator
Installation Guide
Product Overview
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at : http://www.rosewill.com
for complete warranty information and future support for your product.
If you have any questions while using our products, please visit our website : www.rosewill.com
for latest driver & user manual.
Support Phone Number: 800-575-9885
2© All rights reserved by Rosewill
Disassembling Chart
Top Panel
Left side panel
Right Side Panel
Front Panel
HDD Tray
Front I/O Cable Pinout ( Please refer to your motherboard’s user manual to connect. )
USB 3.0 CONNECTOR
USB2.0 CONNECTOR
Card Reader CONNECTOR
HD Audio CONNECTOR
USB+5V
LP
LP+
GND
NC
USB+5V
LP
LP+
GND
NO PIN
AUD GND
GND
NC
USB+5V
LP-
LP+
GND
USB+5V
LP-
LP+
PRESENCE#
SENSE1 RETURN
NO PIN
SENSE2 RETURN
PORT1L
PORT1R
PORT2R
SENSE SEND
PORT2L
NO PIN NO PIN
PIN
PIN
( Components vary by country )
User ManualVIPER Z
CASE
3© All rights reserved by Rosewill
Top I/O
User ManualVIPER Z
CASE
Audio
HD AUDIO connector
HD AUDIO connector
to M/B (1 Audio Connection per M/B,
please check HD Audio)
Card Reader
Card Reader
Card Reader connector
Card Reader connector
to M/B
Reset Button
to M/B
Reset SW
USB 2.0
USB
to M/B
USB 3.0
USB
TF
SD
USB USB USB S
H L
to M/B
Power Button
TO PSU
TO FAN
to M/B
POWER SW
1
2
3
4
4 3 2 1
4© All rights reserved by Rosewill
User Manual
Accessory Box
16x Screw-A 2.5” HDD/SSD
1x Screw-D Side Panel Lock
16x Screw-B 3.5”/5.25” ODD
1x M/B Sleeve M/B Standoff
1x PC Buzzer Motherboard
2x Cable Tie Cables
1x Side Panel Lock Side Panel
3x M/B Standoff Motherboard
19x Screw-C PSU + M/B
VIPER Z
CASE
Part’s Name FunctionFigure
2. Install Power Supply
5© All rights reserved by Rosewill
Installation Guide
1-1 Remove the 2 thumbscrews on each
panel and slide them out.
2-1 Rest the power supply unit on the bottom of
the case and secure it down with screw-C.
If the PSU is equipped with single fan, you
may have two options of installation:
- Fan Facing Upwards:
No special requirements.
- Fan Facing Downwards:
Make sure that there is enough room for
air-intake between the bottom of case
and the surface where the case is located.
- Clean the dust filter regularly to ensure
adequate airflow.
1. Open Chassis
User ManualVIPER Z
CASE
3. Install Motherboard
6© All rights reserved by Rosewill
3-1 Place the motherboard standoffs based on the form factor.
3-2 Secure the motherboard with screw-C.
User ManualVIPER Z
CASE
4. Install Add-in Card
7© All rights reserved by Rosewill
4-1 Unscrew to remove the
slot cover.
4-2 Install the add-in card.
4-3 Secure with screw.
User ManualVIPER Z
CASE
8© All rights reserved by Rosewill
5-2
- Insert the 5.25” drive into the bay and secure
with screw-B.
- Unscrew to retrieve the 3.5” adaptor.
- Rest the 3.5” deice onto the adaptor and
secure it down with screws.
- Install the adaptor back into the bay.
- Reinstall the front panel back onto the case.
5-1 Pull the front panel outwards and detach.
Remove the bay cover.
5. Install External 5.25” device
User ManualVIPER Z
CASE
9© All rights reserved by Rosewill
8-1 Slide the side panels back and secure
with thumbscrews.
6-1 Retrieve the HDD/SSD tray.
6-2 Install the 3.5” HDD onto the tray.
6-3 Secure the 2.5” HDD/SSD down to the tray with
screw-A.
6-4 Insert the tray back into the hard drive cage
until the latch clicks.
6. Install 3.5”/2.5” HDD/SSD
7. Fan Installation 8. System Ready
User ManualVIPER Z
CASE
7-1
The control panel on TOP I/O can connect
up to three fans. Please connect the desired
fans to the control panel, and then connect
the rest of them to the Fan Hub (the PCB
located near M/B). Make sure to connect the
fan hub and PSU with a 4-pin Molex
connector.
Fan Hub
Other manuals for VIPER Z
2
Table of contents
Other Rosewill Enclosure manuals
Rosewill
Rosewill ATX COMPUTER CASE R7439K User manual
Rosewill
Rosewill SRM-01 User manual
Rosewill
Rosewill CASE 422 Series User manual
Rosewill
Rosewill CULLINAN MX Series Instruction manual
Rosewill
Rosewill RX35-AT-SC BLK User manual
Rosewill
Rosewill RX-200-APU3-25B User manual
Rosewill
Rosewill METEOR XR Series Instruction manual
Rosewill
Rosewill THRONE User manual
Rosewill
Rosewill VIPER Z User manual
Rosewill
Rosewill RX35-AT-IU BLK User manual
Rosewill
Rosewill 6X series User manual
Rosewill
Rosewill r5 User manual
Rosewill
Rosewill MAXCUBE User manual
Rosewill
Rosewill PRISM S500 Instruction manual
Rosewill
Rosewill STEALTH User manual
Rosewill
Rosewill CASE 6A Series User manual
Rosewill
Rosewill RX35-AT-SU BLK User manual
Rosewill
Rosewill ZIRCON I User manual
Rosewill
Rosewill RX353 Series User manual
Rosewill
Rosewill FBM-05 User manual
