Rosewill RX-35MV Series User manual

ENCLOSURE

RX-35MV Series

User’s Manual

ENCLOSURE RX-35MV Series User Manual

Foreword

Congratulations on purchasing of USB enclosure series product. It is to show

you a new storing concept with safety and convenience. It is our pleasure to give

you the best solution on removing the storage equipment and enhancing your

data’s reliability in PC system or MAC system. Before using the product, please

follow all of procedure of the manual to use the product correctly.

System Requirement

Basic environment for setup this device:

Hardware requirement

－a PC ,Notebook or Mac system with free USB interface ;

Operation system

－Windows98SE/ME/2000/XP/VISTA, Mac OS 8.6 or above .

Performance

－External USB interface, supporting USB1.0,1.1/2.0;

－Supports Microsoft Windows98/ME/2000/XP/VISTA & Mac OS 8.6 or above;

－Plug and play.

USB Enclosure Series

－Enclosure Series

y 5.25” USB Enclosure supports to install with D-ROM/CD-R/CD-RW/DVD/3.5”

HDD/MO, ect.

y 3.5” USB Enclosure supports to install with 3.5” HDD.

y 2.5” USB Enclosure supports to install with 2.5” HDD only.

－Checking packing list

y 1 USB Enclosure

y 1 floppy or CD drive

y 1 Power cable (5.25” Enclosure only)

y 1 Power Adapter (3.5” Enclosure only)

y 1 USB connecting cable

y 1 PS/2 cable and 1 portable bag (2.5” Enclosure only)

y 1 bag of mounting screws

y 1 bag of desiccant (Dangerous, no eating)

ENCLOSURE RX-35MV Series User Manual

Setup mode under Windows 98/SE

Driver should be setup when firstly using the product, then plug-play available.

The below is an example for setup procedure under Windows98/SE system:

1. Take out the USB Enclosure, then pull out the inner case and take the inner

cover away.

2. Set your Hard Drive into the case, connect the cables carefully (Note: do not

connect 40p signal cable and 4p power cable mistakenly, meanwhile set the

Hard Drive device as “Master/MA”) and fix the screws tightly.

3. Slide the inner case into the frame, fix the screws and connect the power

cable & USB cable. (Note: the USB cable’s square end for USB mobile rack

and the flat end for your operating system or USB port of USB HUB)

4. Start Windows98/SE system. (or open)

5. Turn on the power of USB Enclosure (5.25” &3.5” Enclosure).

6. Windows98/SE will automatically find USB device and go into “add new

hardware” then enter “next”.

7. Choose “search available driver ” ,enter “next”.

8. Insert the right driver floppy or CD, choose “appointed device”, type

“corresponding product code” , and enter “next”.

9. Computer will display:

“USB Mass Storage Device”(USB1.1 Enclosure) or “USB Storage Adapter

AT2 (TPP)” (USB2.0 Enclosure)

10.Enter “finish”, the system will finish the setup automatically. Right setup will

be as the illustration: the circle shows the new device, no yellow, red, or green

question mark or praise mark. After finishing setup, the USB device will be

displayed on “My Computer”

Setup mode under Windows ME/2000/XP/VISTA system

Under Windows ME/2000/XP, the system can find and setup “USB Mass Storage

Device” directly.

Setup mode under MAC OS system

If your system is Mac OS 9.0 or above, the system can find the driver directly. If

your system is 8.6, you have to download and setup “USB MASS SORAGE

SUPPORT1.3.5” from SOFTWARE SUPPORT website: http://www.apple.com.

Note

ENCLOSURE RX-35MV Series User Manual

y For new HDD: Before connecting USB Enclosure, please partition and format

your HDD into FAT16 or FAT32. If your HDD partition is NTFS, UNIX, please let

your HDD be FAT16 or FAT32 before connecting USB Enclosure .Furthermore,

USB HDD in PC system is available in Mac system; USB HDD in Mac system is

not available in PC system, please make it to be PC partition

y USB can provide a rated 5V/500mA power to USB device . For 2.5” USB

Enclosure series: if your HDD operation current is not over 500mA, no need to

provide power to USB Enclosure through PS/2 cable. Otherwise, you’d better to

connect the PS/2 end of PS/2 cable with keyboard and other PS/2 end for USB

Enclosure.

Tips

If your computer cannot setup the driver automatically, please choose “setup

from floppy” through “controller”/”add new hardware”, and choose available

setup path according to the product type , follow setup suggests to finish the

procedure .

Partitioning & Formatting

Please be aware that this will destroy all your existing data on the drive, so make

sure you have a backup!! This step is usually only required the first time you

install the HDD or if you have a factory new HDD.

Windows 98SE, Windows ME

1. Dos command “fdisk”.

2. Type “fdisk” and press Enter.

3. Select “Y”.

4. Enter “5” to change the disk.

5. Select the drive you want to format.

6. Choose “1” follow the instruction.

Windows 2000, Windows XP, Windows VISTA

Disk management program:

1. Select “My Computer”, then right click --> “Manage”.

2. Select “Disk Management”.

3. Choose the drive you want to format and right click on it for further

commands.

ENCLOSURE RX-35MV Series User Manual

4. Follow the partition wizard.

5. If you want to use it on many different OS including Mac, we recommend

FAT 32.

Mac OS

Mac OS 9.2 and before does not support creating partitions on an external

drive. To do that, you have to purchase additional software. Initializing is no

problem on all operating systems. For OSX use the Disk Utility to format and

create partitions on your external disk.

1. Select “Disk Utility” in the Utilities folder

2. Choose your external drive and format it according to your

requirement.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future

support for your product.

Table of contents

Other Rosewill Enclosure manuals

Rosewill

Rosewill RX 304-PU3-35B User manual

Rosewill

Rosewill Lineom User manual

Rosewill

Rosewill FBM-05 User manual

Rosewill

Rosewill RX35-AT-SC BLK User manual

Rosewill

Rosewill CULLINAN MX Series Instruction manual

Rosewill

Rosewill RX35-AT-SU3 User manual

Rosewill

Rosewill PRISM S500 Instruction manual

Rosewill

Rosewill RX81-MP Series User manual

Rosewill

Rosewill RX81US-HT35A-BLK User manual

Rosewill

Rosewill Himars Instruction manual

Rosewill

Rosewill RISE User manual

Rosewill

Rosewill RX200R-APU3-25B User manual

Rosewill

Rosewill RX25-AT-SC-BLK/SLV User manual

Rosewill

Rosewill CULLINAN V Series User manual

Rosewill

Rosewill LINE User manual

Rosewill

Rosewill Cullinan MX Instruction manual

Rosewill

Rosewill Legacy V3 Plus User manual

Rosewill

Rosewill ATX Computer Case R9859 User manual

Rosewill

Rosewill RX35-AT-SU BLK User manual

Rosewill

Rosewill PRISM S Instruction manual

Rosewill

Rosewill CASE 6A Series User manual

Rosewill

Rosewill RISE User manual

Rosewill

Rosewill Cullinan MZ Instruction manual

Rosewill

Rosewill CASE 422 Series User manual

Popular Enclosure manuals by other brands

SilentiumPC

SilentiumPC Armis AR5 Hardware installation

Pulsar

Pulsar 17/TRP80/DSPR Assembly instructions

Thermaltake

Thermaltake V150 TG user manual

MSI

MSI MPG SEKIRA 500X quick start guide

Antec

Antec Dark fleet DF-10 user manual

Nexans

Nexans WTC05 installation manual

Peavey

Peavey DS 1502 Specifications

D-Link

D-Link ShareCenter Pro DNS-1550-04 user manual

QNAP

QNAP SAS JBOD CLI 1.0 user guide

GAMDIAS

GAMDIAS Talos P1 Quick installation guide

Auvs

Auvs KR615 user manual

Digitus

Digitus DA-71114 manual

CommScope

CommScope FDH 3000 user manual

FS FHD-FWME4 quick start guide

JBL

JBL CS1215T owner's manual

Pulsar

Pulsar ARAD-S4 manual

Pulsar

Pulsar AWO454 Assembly instruction

NewerTech

NewerTech Voyager S3 user guide