Rosewill RNX-G100 User manual

Wireless G USB Adapter RNX-G100

Wireless G PCMCIA Adapter RNX-G200

Wireless G PCI Adapter RNX-G300(E)

Quick Installation Guide

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

1. About This Guide

This Quick Installation Guide only provides you some basic instructions. For more detailed

information, please refer to the User Manual.

Before you begin, you must have at least the following:

zA notebook /desktop pc with an available 32-bit Cardbus/PCI/USB slot

zAt least a 300MHz processor and 32MB of memory

zCardbus/PCI/USB controller properly installed and working in the computer

zAn 802.11g or 802.11b Access Point (for infrastructure Mode) or another 802.11g or 802.11b

wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)

2. Install Driver and Utility

Windows Vista

zThe operating system will install all necessary driver files when a wireless adapter is plugged

into your computer. After approximately 1 minute, a message will appear at the lower

right-hand corner “Your new hardware is now installed and can be used.” The hardware and

software installation is completed.

Windows 98SE/ME/2000/XP/VISTA

zInsert the Driver and Utility CD-ROM into the CD-ROM driver.

zThe Wizard should run automatically, and Figure 2-1 should appear. If it doesn’t, click the

Start button and choose Run. In the field that appears, enter C:\autorun.exe (if ‘’C’’ is the

letter of your CD-ROM drive).

Figure 2-1

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

zClick Install Driver & Utility on the Wireless Client Configuration Utility screen

Figure 2-2

zFollow the Install Shield Wizard steps, and click Finish when done.

Figure 2-3

zNow the installation is complete

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

3. Install Wireless adapter

3.1 Cardbus Adapter - RNX-G200

zPower on your notebook, let the operating system boot up completely, and login as needed.

zHold the adapter with the LOGO facing up and insert it into a Cardbus slot.

Figure 3-1

zIf the Found New Hardware Wizard displays, choose install the software automatically

(Recommended), and click Next button. The driver will be installed automatically.

Figure 3-2

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

3.2 PCI Adapter - RNX-G300(E)

zOpen your PC case and locate an available PCI on the motherboard.

zSlide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s

contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the

adapter is firmly in place, secure its fastening tab to your PC’s chassis with a mounting screw.

Then close your PC.

zAttach the external antenna to the adapter’s antenna port.

zPower on the PC.

Figure 3-3

zIf the Found New Hardware Wizard displays, choose install the software automatically

(Recommended), and click Next button. The driver will be installed automatically.

3.3 USB Adapter - RNX-G100

zPower on your PC, let the operating system boot up completely, and login as needed.

zHold the adapter and insert it into a USB slot.

zIf the Found New Hardware Wizard displays, choose install the software automatically

(Recommended), and click Next button. The driver will be installed automatically.

Figure 3-4

You have now completed the driver and hardware installation for the Adapter

4 Configuration your wireless adapter

zThe Wireless Client Configuration Utility screen will appear automatically.

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

Figure 4-1

zClick the Site Survey tab then click the Refresh button to search for available wireless

networks.

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

Figure 4-2

zTo connect to one of the networks on the list, select the wireless network, and click Associate

button.

Congratulations! You’ve successfully configured your wireless adapter!

Please read detail user manual and trouble shooting from the driver disk.

Or contact [email protected] for more support.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for

your product.

Other manuals for RNX-G100

This manual suits for next models

Table of contents

Other Rosewill Adapter manuals

Rosewill

Rosewill RNX-N600UB User manual

Rosewill

Rosewill RNX-N250UB User manual

Rosewill

Rosewill RNX-N180PCE User manual

Rosewill

Rosewill RPLC-201P User manual

Rosewill

Rosewill RNX-BT402 User manual

Rosewill

Rosewill RNX-N300UB User manual

Rosewill

Rosewill RNX-G1-G1W User manual

Rosewill

Rosewill WIRELESS N ADAPTER RNX-N150UBE User manual

Rosewill

Rosewill RNX-N180UB User manual

Rosewill

Rosewill AC600 User manual

Rosewill

Rosewill RNX-N150HG User manual

Rosewill

Rosewill RNX-N150UBEv3 User manual

Rosewill

Rosewill RNX-G300EX User manual

Rosewill

Rosewill N900UBE User manual

Rosewill

Rosewill RNWD-N1501UB User manual

Rosewill

Rosewill RNX-AC600NUBv2 User manual

Rosewill

Rosewill RNX-N1/N1MAC User manual

Rosewill

Rosewill RNX-AC600HGUBEv2 User manual

Rosewill

Rosewill RNX-N2X User manual

Rosewill

Rosewill RC103 User manual

Rosewill

Rosewill RCW618 User manual

Rosewill

Rosewill RNX-N1/N1MAC User manual

Rosewill

Rosewill RNX-G1LX User manual

Rosewill

Rosewill RPLC-200 User manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide