Rose electronics QuadraVista User manual

QUADRAVISTA™ QUAD VIDEO KVM SWITCH

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.CO

Quick Installation Guide

QuadraVista Quick Start Guide

The QuadraVista has been designed to take the guesswork out of the installation

process. The auto-sensing features will determine the type of video monitor

each of the four connected computer has, digital or analog. QuadraVista also will

determine the type of keyboard (USB, PC1, PC2, PC3) and mouse (USB, PS/2,

PS/2 wheel). With these features, you will be up and running in no time.

First, make sure that power is off on QuadraVista and all computers being

connected. Next, connect your KVM user station as shown below. Connect a

USB mouse and USB keyboard to the corresponding USB ports. If a PS/2

keyboard and mouse are used, a PS/2 to USB converter must be used. Next,

connect a VGA or DVI monitor to the DVI-I port. If a VGA monitor is used, a VGA

to DVI converter cable must be used.

Connect up to four computers to the corresponding video (DVI-I),

keyboard/mouse ports on the QuadraVista as shown below.

If a VGA (HD15F) connector is on the computer, a VGA to DVI cable must be

used. If the keyboard and mouse are PS/2, use a PS/2 "Y" cable.

Apply power to the QuadraVista, then computers and user

station monitor. The KVM user stations monitor will display

in the quad mode, all connected computers video.

Refer to the Installation and Operations manual for

additional information about the on-screen menus and other

configurations that can be performed.

KVM user station

QuadraVista Quick Start Guide

Keyboard commands

(Default "HOTKEY" is the CTRL + ALT keys pressed at the same time

followed by the needed command)

Command* Description

"HOTKEY" + Q Change display to quad mode

"HOTKEY" + F Change display to full screen mode

"HOTKEY" + P Change display to PIP function

"HOTKEY" + 1 Switch to computer 1 (Full Screen)

"HOTKEY" + 2 Switch to computer 2 (Full Screen)

"HOTKEY" + 3 Switch to computer 3 (Full Screen)

"HOTKEY" + 4 Switch to computer 4 (Full Screen)

"HOTKEY" + F1 Switch to quad mode and activate channel 1

"HOTKEY" + F2 Switch to quad mode and activate channel 2

"HOTKEY" + F3 Switch to quad mode and activate channel 3

"HOTKEY" + F4 Switch to quad mode and activate channel 4

"HOTKEY" + O Invoke the on-screen menu system

"HOTKEY" + I PIP menu

"HOTKEY" + V Reset video resolution to default setting

(640 x 480 @ 60 Hz)

The QuadraVista has been designed to take the guesswork out of the

installation process. The auto-sensing features will determine the type of

video monitor each of the four connected computer has, digital or analog.

QuadraVista also will determine the type of keyboard (USB, PC1, PC2, PC3)

and mouse (USB, PS/2, PS/2 wheel). With these features, you will be up and

running in no time.

First, make sure that power is off on QuadraVista and all computers being

connected. Next, connect your KVM user station as shown below. Connect

a USB mouse and USB keyboard to the corresponding USB ports. If a PS/2

keyboard and mouse are used, a PS/2 to USB converter must be used.

Next, connect a VGA or DVI monitor to the DVI-I port. If a VGA monitor is

used, a VGA to DVI converter cable must be used.

Connect up to four computers to the corresponding video (DVI-I),

keyboard/mouse ports on the QuadraVista as shown below.

If a VGA (HD15F) connector is on the computer, a VGA to DVI cable must be

used. If the keyboard and mouse are PS/2, use a PS/2 "Y" cable.

KVM user station

QuadraVista Quick Start Guide

Apply power to the QuadraVista, then computers and

user station monitor. The KVM user stations monitor will

display in the quad mode, all connected computers

video.

Refer to the Installation and Operations manual for

additional information about the on-screen menus and

other configurations that can be performed.

Keyboard commands

(Default "HOTKEY" is the CTRL + ALT keys pressed at the same time

followed by the needed command)

Command* Description

"HOTKEY" + Q Change display to quad mode

"HOTKEY" + F Change display to full screen mode

"HOTKEY" + P Change display to PIP function

"HOTKEY" + 1 Switch to computer 1 (Full Screen)

"HOTKEY" + 2 Switch to computer 2 (Full Screen)

"HOTKEY" + 3 Switch to computer 3 (Full Screen)

"HOTKEY" + 4 Switch to computer 4 (Full Screen)

"HOTKEY" + F1 Switch to quad mode and activate channel 1

"HOTKEY" + F2 Switch to quad mode and activate channel 2

"HOTKEY" + F3 Switch to quad mode and activate channel 3

"HOTKEY" + F4 Switch to quad mode and activate channel 4

"HOTKEY" + O Invoke the on-screen menu system

"HOTKEY" + I PIP menu

"HOTKEY" + V Reset video resolution to default setting

(640 x 480 @ 60 Hz)

〒103-0014

東京都中央区日本橋蛎殻町 1-16-11

TEL:03-3668-8089 FAX:03-3668-9872

URL:http://www.cybernetech.co.jp

Other manuals for QuadraVista

Table of contents

Other Rose electronics Switch manuals

Rose electronics

Rose electronics Vista KVL-4PCA Operating and safety instructions

Rose electronics

Rose electronics UltraLink 2 User manual

Rose electronics

Rose electronics ORION lc User manual

Rose electronics

Rose electronics UltraMatrix AV HD User manual

Rose electronics

Rose electronics Vista AV User manual

Rose electronics

Rose electronics SuperSwitch SS-9 User manual

Rose electronics

Rose electronics VISTA DVI User manual

Rose electronics

Rose electronics UltraMatrix Remote 2 User manual

Rose electronics

Rose electronics UEB-8UB User manual

Rose electronics

Rose electronics UltraLink UL-V3 User manual

Rose electronics

Rose electronics Orion XC OXS-XC080-TP User manual

Rose electronics

Rose electronics RP2-1R2X16U User manual

Rose electronics

Rose electronics UltraLink 2 User manual

Rose electronics

Rose electronics Ultraview Pro KVM SWITCH WITH ON-SCREEN... User manual

Rose electronics

Rose electronics ServeView Pro SEB-8UB User manual

Rose electronics

Rose electronics UltraLink UL-DV3 User manual

Rose electronics

Rose electronics Vista KVL-4PCA User manual

Rose electronics

Rose electronics UltraConsole UC1-1X4U User manual

Rose electronics

Rose electronics QuadraVista User manual

Rose electronics

Rose electronics Xtensys XTS-V16x64D16-L User manual

Rose electronics

Rose electronics Vista Remote 2 User manual

Rose electronics

Rose electronics VISTA DVI User manual

Rose electronics

Rose electronics Porter PO-4P User manual

Rose electronics

Rose electronics UltraView Pro User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual