Rose electronics UltraMatrix AV User manual
UltraMatrix A/V Matrix A/V Switch
Quick Start Guide
10707 Stancliff Road
Houston, Texas 77099 Phone: (281) 933-7673
www.rose.com
Unit Installation
Getting Started
(IT IS RECOMMENDED THAT ALL EQUIPMENT BE POWERED OFF UNTIL ALL
CONNECTIONS HAVE BEEN MADE)
Hardware Installation (System must include one master and one secondary unit)
(Installation is performed for each computer (1-16) that is connected to the unit)
1. Connect a serial ”Y” cable (DB9MF) from both UltraMatrix A/V RS232 ports (DB9F) to
the serial port on the controlling computer.
2. Connect up to 16 computers that have your video content to the HD15F video input
connectors labeled In 1-16 on both units using a HD15 MM “Y” cable.
Keep video synchronized; connect to port #1 on the master and port #1 on the
secondary, port #2 on the master and port #2 on the secondary, etc.
3. Connect up to 16 optional audio inputs (Usually from the 16 corresponding computers)
to the 3.5mm audio inputs labeled In1-16) using an audio “Y” cable.
4. Connect up to 32 display monitors to the HD15F video output connectors labeled
OUT1-16 on unit #1 and OUT1-16 on unit #2 using the existing monitor cable or an
extension cable for greater distances.
5. Connect up to 32 optional stereo audio speakers to the 3.5mm audio inputs labeled
Out1-16) on unit #1 and Out1-16 on unit #2.
6. Connect a power cord to the power port on each unit and to a 100/240 VAC power
source
7. Apply power to all connected computers and remote monitors.
Serial Y cableVideo Y cable
Controlling computer
running RoseControl
Secondary Unit
Identified by /NR
suffix on part number
Master Unit
Identified by NO /NR
suffix on part number
Operating the UltraMatrix A/V 16x32
The UltraMatrix A/V can be operated via:
RS-232 serial command inputs or using the provided RoseControl Windows®based software
Rose Control Windows-based software control
The UltraMatrix A/V can be easily switched using the included Rose Control software.
Install the software on a computer or laptop that will be used to switch the UltraMatrix A/V.
When the installation is complete, execute the program “RoseControl” from the “Start” menu and
the below window will display.
Router Count: Set to the number of routers connected to the computer
Advanced Configuration: Used when two conditions are true: 1) There is more than one
router being used, and 2) all the inputs are NOT looped from
router to router. In other words, if there are more than 16
different inputs to control, you will need the advanced
configuration.
Reset Advanced Configuration: Returns the advanced settings to their default numbers.
Router Type: Select the type of router that is connected at this Frame
Address
The Frame Address is the selectable number on the router's
front panel
The Frame Address is displayed to the left of the Router Type
in the Configuration Window
A/V Split: This feature will be in future designs.
Inputs: Enter the number of physical inputs on the back of the router.
Outputs: Enter the number of physical outputs on the back of the
router.
Comm Port The port number on the back of the computer that connects to
the router(s).
Timeout Set how many seconds the program will wait for the router to
respond to commands. Can be in entered in hundredths of a
second. Example: 2.5 will wait 2 and 1/2 seconds. If 0 is
entered, the router will not wait for a response, and therefore
will not display any errors that may happen.
When you click on the OK tab, the below selection matrix will display.
Input Names and
Output Names can
be modified to easily
identify which video
source is being
presented on which
output monitor.
To change these
names, select it and
enter the name
needed.
(Inputs are listed vertically, Outputs are listed horizontally)
Click on the cross-point button to connect an input to an output. Once assigned,
that video and optional audio is instantly switched to the selected outputs.
In the above example: Input 1 is connected to output 16;
Input 3 is connected to output 10 and 13;
Input 4 is connected to output 14.
Unique assignments can be saved in a “Macro” and selected by choosing the Macro needed.
To record a macro, click on the “Record” button and then make your video assignments. When
finished, click on the “Save Macro” button, select a macro # to save the configuration to, enter a
macro name and click “OK”. The macro can be used at any time. If the configuration is not
saved, the macro set-up will be lost when the RoseControl software is terminated. Save the
configuration by clicking on “File”, “Save Configuration”
Please refer to the Help file for additional information.
Serial switching instructions
Baud rate 9600
Start Bits 1
Data Bits 8
Parity None
Stop Bits 1
Command to switch input 1 to output 1 for the default address of 00 is BE EF 00 00 00 00 00 51
Convert each byte to it’s binary equivalent.
BE 1011 1110
EF 1110 1111
00 0000 0000
00 0000 0000
00 0000 0000
00 0000 0000
00 0000 0000
XOR result 0101 0001
Hex equivalent 5 1
To arrive at the XOR result, look at each
column and note the number of 1s. If
there is an even number of 1s or all
zeroes in a column, the result for that
column is zero. The result is 1 if there is
an odd number of 1s in the column.
A B C D E F
BE EF 00 00 00 00 00 51
A = Frame address (00 = master, 01 = secondary)
B = Reserved
C = Command (00 = switch command)
D = Input port number (00 = port #1, 01 = port #2, etc)
E = Output port number (00 = port #1, 01 = port #2, etc)
F = Calculated Check Sum
Example : Command to switch input #3 to output #2
BE EF 00 00 00 02 01 52
〒103-0014
東京都中央区日本橋蛎殻町 1-16-11
TEL:03-3668-8089 FAX:03-3668-9872
URL:http://www.cybernetech.co.jp
Other manuals for UltraMatrix AV
2
Other Rose electronics Switch manuals
Rose electronics
Rose electronics ServeView Pro SEB-8UB User manual
Rose electronics
Rose electronics ORION lc User manual
Rose electronics
Rose electronics Vista KVL-4PCA User manual
Rose electronics
Rose electronics x series User manual
Rose electronics
Rose electronics VISTA DVI User manual
Rose electronics
Rose electronics Vista KVL-4PCA User manual
Rose electronics
Rose electronics Caretaker Plus Automatic Switch User manual
Rose electronics
Rose electronics Xtensys Instruction Manual
Rose electronics
Rose electronics MASTER SWITCH User manual
Rose electronics
Rose electronics Vista KVL-4PCA Operating and safety instructions
Rose electronics
Rose electronics UltraMatrix EE2-1X16U/E Operating and safety instructions
Rose electronics
Rose electronics Vista DVI Plus User manual
Rose electronics
Rose electronics MultiVideo HDMI MDM-4T2HD-A1MultiVideo HDMI... User manual
Rose electronics
Rose electronics Xtensys User manual
Rose electronics
Rose electronics Video Easyware Owner's manual
Rose electronics
Rose electronics Orion XC OXS-XC080-TP User manual
Rose electronics
Rose electronics QuadraVista User manual
Rose electronics
Rose electronics ORION lc User manual
Rose electronics
Rose electronics VISTA KVL User manual
Rose electronics
Rose electronics VISTA DVI User manual
