ROSE DISPLAYS ANOQUICK SQUARE WITH MULTICLIPS User manual

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Square Profile Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

MultiClips

1UP-0101

End Caps

06-5545

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

AnoQuick™

Instructions For Hanging

Incept-7.31.02

Figure 2

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClip

1UP-0101

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClips

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

Square Profile Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClip

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6Figure 5

Figure 1

Figure 3 Figure 4

This manual suits for next models

Table of contents

Other ROSE DISPLAYS Accessories manuals

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND LOOP AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH CABLE CLIP AND CABLE AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS ECONOSTAND WITH ANOGOTCHA User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH MULTICLIPS User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOSCREEN WITH ANOFOOT User manual

ROSE DISPLAYS

ROSE DISPLAYS ECONOSTAND WITH ANOQUICK User manual

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH CABLE CLIP AND BALL CHAIN User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI WITH WINDOW MOUNTS User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH NO HANGING User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH CABLE AND SAUCER User manual

ROSE DISPLAYS

ROSE DISPLAYS ULTRAFRAME User manual

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH CABLE CLIP AND CABLE User manual

ROSE DISPLAYS

ROSE DISPLAYS PANEL DIVIDER User manual

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH WINDOW MOUNTS User manual

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH CABLE CLIP AND CABLE AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE CLIP AND BALL... User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT MAGNET BASE User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND SAUCER User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE CLIP AND LOOP AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH CABLE CLIP AND LOOP AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-TOGGLEBOLTS User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH SLATWALL User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH CABLE CLIP AND BALL... User manual

ROSE DISPLAYS

ROSE DISPLAYS BUTTERFLY CLIPS WITH CABLE AND SAUCER User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual