Roland TrueVIS SG2-640 User manual
Copyright © 2019 ROLAND DG CORPORATION
TERMS OF USE
Users of this Product Guide shall be deemed to agree with the following Terms of Use.
1. USERS
This Product Guide is only for authorized persons with user ID and password issued by Roland DG
Corporation.
2. PURPOSE
Authorized persons can use this Product Guide only for the purposes of selling and providing to
the customers maintenance service of SG2-640/540/300.
3. REUSE
Authorized persons shall not disclose, transfer, rent or distribute this Product Guide to, or allow
this Product Guide to be used in any manner by, any third party other than authorized persons.
4. REPRODUCTION
Authorized persons shall not copy, change or alter this Product Guide without permission of
Roland DG Corporation.
5. EFFECT OF VIOLATION
Regardless of circumstances, we will vigorously respond to any violation hereof, through legal
action.
Product Guide
SG2-640/540/300
Version 1.3 October 25, 2019
Confidential
2/27
CONFIDENTIAL
Version Date Contents
1.0 July 31, 2019 First Edition
1.1 August 28, 2019 [1.Product Information] Misdescriptions in [Changes] have been corrected.
1.2 October 4, 2019
[2.Printing Theory] Operation of ink slot choke valve changed.
[9.Installation]
Serial numbers of the machines that do not need connecting of damper
tube added.
1.3 October 25, 2019 [2.Printing Theory]
Ink consumption of SG2-640/540 “Generic Banner I” has been corrected.
3/27
CONFIDENTIAL
Contents
1. Product Information
2. Printing Theory
3. Ink Line
4. Ink
5. Other Features
6. Special Pump Operations
7. Maintenance
8. Software
9. Installation
10. Transport
11. Periodic Replacement Parts
4/27
CONFIDENTIAL
⚫SG2-640/540/300
Series name: TrueVIS
❖64/54 inch Print & Cut device
Overview
❖Ink cartridge
-TR2 ink
-Capacity: 500 ml
❖Ink type
-CMYK
❖Supported software
-VersaWorks
-Roland Mobile Panel 2
❖Option
-TUC4
-TU4-64/TU4-54/TU4-30
1.Product Information
5/27
CONFIDENTIAL
⚫Overview
Entry mode based on VG2 series with
improved usability and reliability
1.Product Information
Multiple crop
marks
TR2 Ink Automatic up/down
middle pinch roller
White LED light
Embedded
media clamp
TU4
2L capacity
drain bottle
Perforated
cutting
Accessories
storage
compartment
VersaWorks
MobilePanel2
Two FlexFire
heads installed
Nozzle mask
6/27
CONFIDENTIAL
⚫Specifications
1.Product Information
3,080mm(SG2-640)
2,820mm(SG2-540)
2,220mm(SG2-300）
835mm(SG2-640)
835mm(SG2-540)
835mm(SG2-300)
1,050mm(SG2-640)
1,050mm(SG2-540)
1,050mm(SG2-540)
SG2-640 SG2-540 SG2-300
Loadable Media Width
315 to 1,625 mm
Roll diameter no greater than 210 mm
275 to 1,371 mm
Roll diameter no greater than 210 mm
182 to 762 mm
Roll diameter no greater than 210 mm
Printable Area
Max. 1,600 mm
Max. 1,346 mm
Max. 736 mm
Media Weight
Max. 40 kg
Max. 30 kg
Max. 25 kg
Dimensions with stand
2,945[W] x 730[D] x 1,310[H] mm
2,685[W] x 730[D] x 1,310[H] mm
2,070[W] x 730[D] x 1,310[H] mm
Weight with stand
197 Kg
180 Kg
147 Kg
Power consumption
100
-120V: During Operation 1,060 W
Sleep mode 40 W
100
-120V: During Operation 1,060 W
Sleep mode 40 W 100-120V: During Operation 710 W
Sleep mode 40 W
During Operation 1,090 W
Sleep mode 40 W
During Operation 1,090 W
Sleep mode 40 W
During Operation 710 W
Sleep mode 40 W
Packaging dimensions
(including skid)
3,080[W] x 1050[D] x 835[H] mm
2,820[W] x 1050[D] x 835[H] mm
2,220[W] x 1050[D] x 835[H] mm
Packaging Weigh
(including skid)
271.0kg
242.0kg
195.5Kg
7/27
CONFIDENTIAL
1.Product Information
⚫Changes
Item Contents SG series SG2 VG2 series
Size
Body
540/300
640/540/300
640/540
Ink
Supported ink
TR TR2 TR2
Ink type
CMYK CMYK
CMYKLcLmLkWh
CMYKLcLmLkOr
CMYK
３
M Warranty
Long term warranty is available under
warranty requirement.
ー✔ ✔
Option
Take
-up unit TU2/TUC-2 TU4/TUC-4 TU4/TUC-4
Take
-up mode
Take
-up of media is stabilized with
the standard mode which takes up
the media while slacking it.
Tense take-up Tense take-up
Loose take
-
up
Tense take-up
Loose take-up
MobilePanel
MobilePanel2 supported
Waiting time is drastically shortened
with MobilePanel2.
MobilePanel MobilePanel2 MobilePanel2
Rev.1.1
8/27
CONFIDENTIAL
1.Product Information
⚫Changes
Rev.1.1
Item Contents SG series SG2 VG2 series
Service
FlexFire
Head 2 2 4
Cap open suction with micro
opening
Ink mixture is prevented by making
the gap between the cap top and
print head very small at the time of
cap open suction.
ー✔ ✔
Crop mark sensor
Voltage is adjusted at a white part of
vinyl, and voltage value at the time of
adjustment is stabilized.
ー✔ ✔
Eliminate ink empty detection
bar
Ink empty is detected by the filler
sensor.
ー✔ ✔
Peck
Enter service mode not by the
conventional key operation, but by
Peck 2. (for the machine supporting
Peck2.)
Peck Peck2 Peck2
VersaWorks
Multi crop marks
Crop marks can be added individually
by data, rows or multiple data.
ー✔ ✔
Nozzle masking
If missing dots occur, printing can be
performed without using all the print
head nozzles.
ー✔ ✔
True rich color
Color gamut is widened and bright
color printing can be achieved.
ー✔ ✔
Perforated cut
Allows users to cut out paper
packaging, etc.
ー✔ ✔
9/27
CONFIDENTIAL
1.Product Information
⚫Changes
Item Contents SG series SG2 VG2 series
Print & Cut
Automatic middle pinch roller lifting
system
Middle pinch roller is lifted
automatically during cutting.
ー✔ ✔
Added scale on print & cut
adjustment test pattern
Letters F (FEED) and S (SCAN)
are printed on test pattern so
that users know the direction.
ー✔ ✔
Time for printing print & cut
adjustment test pattern shortened
Printing mode and adjustment
range of test pattern (from 2 mm
to 1 mm) are changed.
ー✔ ✔
Optimized pinch roller pressure
Pressure of pinch rollers is
optimized.
ー✔ ✔
Improved crop mark sensing for
various materials
Reading accuracy of crop mark
sensor is improved.
ー✔ ✔
Automatic crop mark sensor
adjustment (print crop mark and
the sensor will be adjusted
automatically)
Automatic correction is
performed if crop marks cannot
be detected.
ー✔ ✔
Cut calibration: Right and left side
alignment is possible
Cutting position is corrected by
setting value of cut calibration
even if automatic environment
matching is effective.
ー✔ ✔
Overcut function for better edging
quality
Corners of the outline are cut
longer and that makes it easier to
peel the corner part.
ー✔ ✔
Optimized timing of automatic
environment matching
Environmental matching is
performed not at the time of
reading the media width, but
before printing.
ー✔ ✔
Drying time set in RIP prioritized
Drying time at the printing and
cutting set in RIP is prioritized.
Machine setting
prioritized RIP setting
prioritized RIP setting
prioritized
Rev.1.1
Other manuals for TrueVIS SG2-640
2
This manual suits for next models
2
Table of contents
Other Roland Printer manuals
Roland
Roland IU-1000F User manual
Roland
Roland CAMM-2 PNC-2300 Parts list manual
Roland
Roland CAMM-2 PNC-2300 User manual
Roland
Roland SJ-1045EX User manual
Roland
Roland versaUV lec-540 User manual
Roland
Roland Hi-Fi JET FH-740 User manual
Roland
Roland VersaUV LEC2-300 Operating manual
Roland
Roland LEC-300A User manual
Roland
Roland Metaza MPX-60 User manual
Roland
Roland CAMM-1 PNC-1610 User manual
Roland
Roland FJ-50 User manual
Roland
Roland METAZA MPX-70 User manual
Roland
Roland LEC-300 Owner's manual
Roland
Roland Color CAMM PC-50 User manual
Roland
Roland XC-540W User manual
Roland
Roland VersaSTUDIO BN-20D User manual
Roland
Roland VersaUV LEF-20 Use and care manual
Roland
Roland EGX-600 Operating and maintenance manual
Roland
Roland VersaUV LEF-200 User manual
Roland
Roland TrueVIS SG3-540 User manual
