Roland LEC-300 Owner's manual
Supplemental Manual
This machine supports the ink.
This document describes important points regarding ink.
Please be sure to read this document.
Part of ”Setup Guide” has been changed with support of the ECO-UVS ink.
When you install the ink cartridges for the rst time, be sure to read ”Installing the Ink Cartridges”in page
2 of this document, or ”Installing the Ink Cartridges (LEC-330/ LEC-540/ LEJ-640)” in page 9.
Conditional selection of the ink type becomes available upon lling with ink
after the [HEAD WASH] menu is executed. In other words, you can switch
the ink type even after lling with ink.
For information on how to switch the ink type, please read ”Switching the
Ink Type”in page 17.
INK CONTROL
HEAD WASH
The content of “Installing the Ink Cartridges” has been changed.
The available operation after the [HEAD WASH] menu is executed
has been changed.
R2-110607
1
Copyright © 2011 Roland DG Corporation http://www.rolanddg.com/
Contents
Contents........................................................................................................1
Installing the Ink Cartridges (LEC-300A) ...........................................................2
Filling with Ink for the First Time....................................................................2
Afxing the Cartridge-Slot Labels..................................................................2
Installing the Ink Cartridges...........................................................................4
Installing the Ink Cartridges (LEC-330 / LEC-540 / LEJ-640) ...........................9
Ink Mode .......................................................................................................9
Filling with Ink for the First Time....................................................................9
Afxing the Cartridge-slot Labels ..................................................................9
Selecting the Ink Mode................................................................................ 11
Installing the Ink Cartridges.........................................................................13
Switching the Ink Type ......................................................................................17
Restrictions on Switching Ink Type..............................................................17
Method for Switching the Ink Type ..............................................................18
About Handling of ECO-UVS Ink ......................................................................21
2
Installing the Ink Cartridges (LEC-300A)
Filling with Ink for the First Time
When installing ink cartridges for the rst time, clean the print heads with the cleaning solution, and then ll
with ink of each color. This operation requires four SOL INK cleaning cartridges.
This operation requires four UNUSED SOL INK cleaning cartridges.
Never under any circumstances use anything other than the specied type of ink or cleaning uid.
Afxing the Cartridge-Slot Labels
Procedure
Open the ink cartridge cover.
Hold the knob.
Knob
Installing the Ink Cartridges (LEC-300A)
3
At the locations shown in the gure, afx the cartridge-slot labels matching the se-
lected ink type.
Ink type
ECO-UV CMYKGlW
(Cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge,
and one white ink cartridge are used.)
Cartridge-slot
labels to ax None
After axing
Ink type
ECO-UVS CMYKWW
(Cyan, magenta, yellow, and black ECO-UVS ink cartridges and two white ink car-
tridges are used.)
Cartridge-slot
labels to ax(*1)
After axing
(*1) is an included item.
Back of the machine
Afx here.
Ink cartridge cover
Installing the Ink Cartridges (LEC-300A)
4
Installing the Ink Cartridges
During cleaning, you need to insert and remove cartridges several times. The on-screen messages tell you
when or which cartridge to be inserted or removed. The SOL INK cleaning cartridges are not dierentiated
by color.
1.
Make the initial settings.
Close the front cover.
Insert each color ink cartridge into the slot labeled with the matching color. If you insert wrong car-
tridges when lling ink, the condition cannot be restored easily. Contact your authorized Roland DG
Corp. dealer or us., if you lled ink with wrong cartridges inserted.
Be sure to follow the onscreen instruc-
tions for insertion and removal.
Insert and remove slowly, one at a time.
Insert rmly, as far as it will go.
Insert rmly until you hear a beep.
Slot number
Arrow
Front cover
Installing the Ink Cartridges (LEC-300A)
5
Switch on the main power switch.
Hold down and press the sub power switch.
Use to select the language you want.
Press .
Use to select the unit of measurement you want
(for length).
Press .
Use to select the unit of measurement you want
(for temperature).
Press .
2.
Clean the print heads using the SOL INK cleaning cartridge.
Press and select the ink type.
[ ECO-UV CMYKGlW ] : Cyan, magenta, yellow, and black ECO-UV ink car-
tridges, one gloss ink cartridge, and one white ink cartridge are used.
[ ECO-UVS CMYKWW ] : Cyan, magenta, yellow, and black ECO-UVS ink
cartridges and two white ink cartridges are used.
Press .
MENU LANGUAGE
JAPANESE
LENGTH UNIT
mm mm
TEMP. UNIT
C C
SELECT INK TYPE
ECO‑UV CMYKGlW
SELECT INK TYPE
ECO‑UVS CMYKWW
Main power switch
Installing the Ink Cartridges (LEC-300A)
6
Make sure the drain bottle is installed.
Press .
Insert the SOL INK cleaning cartridges into slots 1, 2, 3, and
4.
When this screen appears, pull out the SOL INK cleaning
cartridges.
Insert the SOL INK cleaning cartridges you pulled out into
slots 5 and 6.
When this screen appears, pull out the SOL INK cleaning
cartridges.
When this screen appears, cleaning is nished.
Make sure the drain bottle is installed, and press .
INSTALL
DRAIN BOTTLE
SET CL-LIQUID
1 2 3 4
FILLING INK...
>>
REMOVE CL-LIQUID
1 2 3 4
SET CL-LIQUID
5 6
FILLING INK...
>>>>
REMOVE CL-LIQUID
5 6
FILLING INK...
>>>>>>>>
CHECK
DRAIN BOTTLE
Installing the Ink Cartridges (LEC-300A)
7
3.
Insert the ink cartridges for the respective colors.
Before you insert the ink cartridge for each
color, gently shake the cartridge.
Insert the ink cartridge for each color.
Close the ink cartridge cover.
SET CARTRIDGE
1 2 3 4 5 6
FILLING INK...
>>>>>>>>>>
Insert into the slot of the matching color.
Installing the Ink Cartridges (LEC-300A)
8
Make sure the drain bottle is installed.
Press .
When this screen appears, lling with ink is nished.
Be Sure to Keep the Ink Cartridge Cover Closed at All Times.
The ink cartridge cover prevents the ink cartridges from being exposed to direct sunlight or strong illumination.
If the ink cartridges are exposed to them, the ink inside the cartridges will become hardened, and it may cause
the printer to malfunction. Make sure that the ink cartridge cover is always closed except when absolutely
necessary, such as when you are replacing ink cartridges.
CHECK
DRAIN BOTTLE
SETUP SHEET
ROLL
Other manuals for LEC-300
4
This manual suits for next models
4
Table of contents
Other Roland Printer manuals
Roland
Roland Texart RT-640 User manual
Roland
Roland FJ-42 User manual
Roland
Roland VS-640i User manual
Roland
Roland SOLJET Pro 4 XF-640 User manual
Roland
Roland Hi-Fi JET FH-740 User manual
Roland
Roland VersaUV LEJ-640 F User manual
Roland
Roland TrueVIS VG3-640 User manual
Roland
Roland Texart RT-640 User manual
Roland
Roland SOLJET PROIII XC-540 User manual
Roland
Roland TrueVIS AP-640 User manual
Roland
Roland VersaUV LEF2-300 User manual
Roland
Roland VS-640i Operating manual
Roland
Roland VersaUV LEF-12 Use and care manual
Roland
Roland Texart RT-640 User manual
Roland
Roland VersaCamm SP-540V User manual
Roland
Roland VersaUV LEJ-640 Operating and maintenance manual
Roland
Roland Metaza MPX-60 User manual
Roland
Roland SOLJET PROIII XC-540 User manual
Roland
Roland TrueVIS VG-640 User manual
Roland
Roland VersaUV LEC2-300 User manual
