Roland CJ-540 User manual

Additional Parts

The parts listed below are added to the list of items packed with

this unit that are listed in the user's manual. These parts are re-

quired when installing this unit on one of the models listed in

the previous section. For other models, they are not needed.

• Extension plate: 1

• Screws: 2

• Cap screw (small): 1

TU-650/550/500/400 (TUC-60/70) Supplement:

Installation on the CAMMJET/SOLJET PRO II Series

About This document

If you're using one of the following printers, please refer to this

document in addition to the user's manual for this unit.

Models Covered by This Document

• CAMMJET PRO II series (such as the CJ-540)

• SOLJET PRO II series machines that support cutting

(such as the SC-540)

To install this unit on one of these models, the additional opera-

tion described here must be carried out. If your printer is not one

of these models, then you do not need to carry out the instruc-

tions in this document.

Additional Operation

Before you install this unit's control box on the printer, carry out

the following additional operation. This operation uses the ex-

tension plate to change the position where the AC adapter is

mounted.

This operation also requires a Phillips screwdriver (not included)

for tightening the screws.

1

Detach the AC adapter from the control box.

2

Attach the extension plate to the control box.

The extension plate has a front and a back. Orient the ex-

tension plate so that the screw holes are positioned as shown

in the figure.

To attach the extension plate, use the included screws and

the small cap screw.

3

Attach the AC adapter.

To attach it, use the screws and cap screw you removed in

step 1.

Note that the AC adapter is installed at a location opposite

its original position.

4

This completes the additional operation. Continue by

following the instructions in the user's manual to in-

stall the unit.

R1-030312

Copyright© 2003 Roland DG Corporation

http://www.rolanddg.com/

Control box

AC adapter

Screws

(included items)

Small cap screw

(included item)

Extension plate

Screws

(removed in step 1)

Cap screw

(removed in step 1)

Other manuals for CJ-540

1

This manual suits for next models

3

Other Roland Printer manuals

Roland

Roland VersaSTUDIO User manual

Roland

Roland VersaStudio BN-20 User manual

Roland

Roland Metaza MPX-90M User manual

Roland

Roland LEC-300A User manual

Roland

Roland XR-640 User manual

Roland

Roland TrueVIS MG-640 User manual

Roland

Roland SolJet Pro II V SC-545EXW User manual

Roland

Roland Metaza MPX-50 User manual

Roland

Roland FJ-50 User manual

Roland

Roland CAMM-2 PNC-2300 Parts list manual

Roland

Roland TrueVIS VG3-640 User manual

Roland

Roland Texart RT-640 User manual

Roland

Roland VersaStudio BN-20 Use and care manual

Roland

Roland VS-640i User manual

Roland

Roland TrueVIS SG2-640 Operating manual

Roland

Roland VersaUV LEC2-330 User manual

Roland

Roland SP-540i User manual

Roland

Roland VersaCAMM ECO-SOL MAX3 User manual

Roland

Roland VS-640 User manual

Roland

Roland CAMM SCRIBE CS-20 User manual

Roland

Roland SJ-740 User manual

Roland

Roland SOLJET Pro III XC-540 User manual

Roland

Roland TrueVIS VG2-640 Operating manual

Roland

Roland SOLJET PROIII DU-740 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide