Rohde & Schwarz TSME6 User manual
R&S®TSME6
Ultra Compact Drive Test
Scanner
Getting Started
Getting Started
Version 02
4900002702
(a00K2)
This manual applies to the following R&S®TSME6 models and options:
●R&S®TSME6 (4900.0004.02)
© 2019 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
4900.0027.02 | Version 02 | R&S®TSME6
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol , e.g.
R&S®TSME6 is indicated as R&S TSME6.
Contents
R&S®TSME6
3Getting Started 4900.0027.02 ─ 02
Contents
1 Safety Information................................................................. 5
2 Documentation Overview......................................................6
2.1 Getting Started Manual.........................................................................6
2.2 User Manuals and Help........................................................................ 6
2.3 Tutorials................................................................................................. 6
2.4 Basic Safety Instructions..................................................................... 6
2.5 Brochures and Data Sheets................................................................. 7
2.6 Application Notes, Application Cards, White Papers, etc.................7
3 Key Features.......................................................................... 8
4 Preparing for Use...................................................................9
4.1 Putting into Operation.......................................................................... 9
4.2 Switching the Instrument On and Off............................................... 29
5 Instrument Tour................................................................... 31
5.1 Front Panel View................................................................................. 31
5.2 Rear Panel View.................................................................................. 32
Index..................................................................................... 36
Contents
R&S®TSME6
4Getting Started 4900.0027.02 ─ 02
Safety Information
R&S®TSME6
5Getting Started 4900.0027.02 ─ 02
1 Safety Information
The product documentation helps you to use the R&S TSME6 safely and effi-
ciently. Follow the instructions provided here and in the printed "Basic Safety
Instructions". Keep the product documentation nearby and offer it to other users.
Intended use
The R&S TSME6 is designated for the development, production and verification
of electronic components and devices in industrial, administrative, and laboratory
environments. Use the R&S TSME6 only for its designated purpose. Observe the
operating conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you about the
potential dangers and gives instructions how to prevent personal injuries or dam-
age caused by dangerous situations. Safety information is provided as follows:
●The printed "Basic Safety Instructions" provide safety information in many lan-
guages and are delivered with the R&S TSME6.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
Documentation Overview
R&S®TSME6
6Getting Started 4900.0027.02 ─ 02
2 Documentation Overview
This section provides an overview of the R&S TSME6 user documentation.
Unless specified otherwise, you find the documents on the R&S TSME6 product
page at:
www.rohde-schwarz.com/manual/tsme6
2.1 Getting Started Manual
Introduces the R&S TSME6 and describes how to set up and start working with
the product. Includes basic operations, typical measurement examples, and gen-
eral information, e.g. safety instructions, etc. A printed version is delivered with
the instrument.
2.2 User Manuals and Help
Contains the description of all instrument modes and functions. It also provides
information on maintenance, instrument interfaces and error messages. Includes
the contents of the getting started manual .
2.3 Tutorials
Tutorials offer guided examples and demonstrations on operating the
R&S TSME6. They are provided on the internet page of the product.
2.4 Basic Safety Instructions
Contains safety instructions, operating conditions and further important informa-
tion. The printed document is delivered with the instrument.
Basic Safety Instructions
Documentation Overview
R&S®TSME6
7Getting Started 4900.0027.02 ─ 02
2.5 Brochures and Data Sheets
The data sheet contains the technical specifications of the R&S TSME6. It also
lists the firmware applications and their order numbers, and optional accessories.
The brochure provides an overview of the instrument and deals with the specific
characteristics.
See www.rohde-schwarz.com/brochure-datasheet/tsmx
2.6 Application Notes, Application Cards, White
Papers, etc.
These documents deal with special applications or background information on
particular topics.
See www.rohde-schwarz.com/application/tsmx
Application Notes, Application Cards, White Papers, etc.
Key Features
R&S®TSME6
8Getting Started 4900.0027.02 ─ 02
3 Key Features
The R&S TSME6 sets standards in RF performance and usability. Outstanding
key features are:
●Simultaneous measurements with no limitations in 3GPP frequency bands
and technologies with SIB/L3 decoding support up to 6GHz
●More than ten technologies simultaneously in one scanner
●Future-proof for upcoming 5G related measurements
●Compact and lightweight design with customized mechanical concept for cas-
cading
●Low power consumption
●Up- and downward compatibility for maximum degree of freedom (e.g R&S
TSME)
●Easy software and hardware upgrades for new features support
For a detailed specification refer to the data sheet.
Preparing for Use
R&S®TSME6
9Getting Started 4900.0027.02 ─ 02
4 Preparing for Use
●Putting into Operation....................................................................................... 9
●Switching the Instrument On and Off.............................................................. 29
4.1 Putting into Operation
This section describes the basic steps to be taken when setting up the
R&S TSME6 for the first time.
Risk of injury due to disregarding safety information
Observe the information on appropriate operating conditions provided in the
data sheet to prevent personal injury or damage to the instrument. Read
and observe the basic safety instructions provided with the instrument, in
addition to the safety instructions in the following sections. In particular:
●Do not use an isolating transformer to connect the instrument to the AC
power supply.
●Do not open the instrument casing.
Risk of instrument damage due to inappropriate operating conditions
Specific operating conditions are required to ensure accurate measure-
ments and to avoid damage to the instrument. Observe the information on
appropriate operating conditions provided in the basic safety instructions
and the instrument's data sheet.
Putting into Operation
Preparing for Use
R&S®TSME6
10Getting Started 4900.0027.02 ─ 02
Instrument damage caused by electrostatic discharge
Electrostatic discharge (ESD) can damage the electronic components of the
instrument and the device under test (DUT). Electrostatic discharge is most
likely to occur when you connect or disconnect a DUT or test fixture to the
instrument's test ports. To prevent electrostatic discharge, use a wrist strap
and cord and connect yourself to the ground, or use a conductive floor mat
and heel strap combination.
Risk of instrument damage during operation
An unsuitable operating site or test setup can cause damage to the instru-
ment and to connected devices. Ensure the following operating conditions
before you switch on the instrument:
●The instrument is dry and shows no sign of condensation.
●The instrument is positioned as described in the following sections.
●Signal levels at the input connectors are all within the specified ranges.
EMI impact on measurement results
Electromagnetic interference (EMI) may affect the measurement results.
To suppress generated electromagnetic interference (EMI):
●Use suitable shielded cables of high quality. For example, use double-
shielded RF and LAN cables.
●Always terminate open cable ends.
●Note the EMC classification in the data sheet.
●Unpacking and Checking the Instrument.........................................................11
●Accessory List................................................................................................. 11
●Cascading R&S TSME6s................................................................................ 11
●Connecting the DC Power Supply...................................................................16
●Setting Up the LAN Connection to the Host PC..............................................18
●Connecting External Devices.......................................................................... 26
●Connecting a Kensington Lock....................................................................... 27
●Enabling Untethered Dead Reckoning ...........................................................28
Putting into Operation
Other manuals for TSME6
2
Table of contents
Other Rohde & Schwarz Scanner manuals
Rohde & Schwarz
Rohde & Schwarz TSMA6B User manual
Rohde & Schwarz
Rohde & Schwarz TSMA6B User manual
Rohde & Schwarz
Rohde & Schwarz TSME User manual
Rohde & Schwarz
Rohde & Schwarz TSME6 User manual
Rohde & Schwarz
Rohde & Schwarz R&S TSMA6 User manual
Rohde & Schwarz
Rohde & Schwarz TSMA6B User manual
Rohde & Schwarz
Rohde & Schwarz TSMA User manual
Rohde & Schwarz
Rohde & Schwarz TSME6 User manual
Rohde & Schwarz
Rohde & Schwarz TSMA6B User manual
Rohde & Schwarz
Rohde & Schwarz TSMA6 Series User manual
