Rinnai RINV25RC User manual

This appliance shall be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000

• Local Regulations and Municipal Building Codes including local OH&S requirements

This appliance must be installed, maintained and removed by an Authorised Person.

For continued safety of this appliance it must be installed and maintained in

accordance with the manufacturers instructions.

31°C

Cooling

22.0

WiFi Operation Manual

Split Type Wall Mounted Air Conditioner

Models: RINV25RC / RINV34RC / RIN51RC / RINV70RC

Rinnai 2 Split AC WiFi OM

This page is intentionally blank

Rinnai 3 Split AC WiFi OM

WIFI COMPATIBILITY / CONNECTIVITY

Rinnai Split Type Wall Mounted Air Conditioner models RINV25RC, RINV34RC, RINV51RC and RINV70RC are

tted with built-in WiFi connectivity. Using the AC Freedom App (available from Apple App Store or Google Play) it

is then possible to use a smart phone or tablet to operate these appliances remotely.

A WiFi router (paired with the appliance via AC Freedom App) is used to control the Air Conditioner(s).

IMPORTANT

The Air Conditioner(s) MUST BE installed in a location that has WiFi router coverage.

If the controlling mobile device is outside of the WiFi router's coverage i.e. operating remotely,

then the WiFi router will require an internet connection to communicate with the controlling

mobile device.

Within Wi-Fi router coverage

Outside Wi-Fi router coverage

1. Indoor air conditioning unit (AC Device)

2. Smart phone or tablet (using WiFi)

3. WiFi router

4. Internet connection

5. Internet cloud

6. Smart phone or tablet (using internet cloud)

MINIMUM REQUIREMENTS

• Rinnai Split Type Wall Mounted Air Conditioner models: RINV25RC, RINV34RC, RINV51RC and RINV70RC

• WiFi Router, 2.4G frequency range supporting 802.11b/g/n mode, with coverage of the Appliance(s) location

• For remote cloud based operation WiFi router / modem with active internet connection

• Smart phone / Tablet (Android 4.1+ or Apple iOS 6.0+) with AC Freedom App installed

Android QR code

or search AC Freedom in Google Play

iOS QR code

or search AC Freedom in Apple App Store

INTRODUCTION

Rinnai 4 Split AC WiFi OM

Pairing With Mobile device & WiFi Network

1. Turn on the Air Conditioner

that is to be paired, then

activate the WiFi module by

pressing the HEALTH button

on the remote control 8 times.

A double beep conrms that the

WiFi module is activated and will be

available to pair for 30 minutes.

2. Select the mobile device for

pairing (for best results only

pair one mobile device and

one AC device at a time). Turn

off the mobile data for the

mobile device , then connect it

to the desired WiFi network.

3. Open the AC Freedom App,

the following intro / loading

page is displayed briey.

4. Before the AC Freedom App

can be used it will need to be

activated, by either a QR code

or by an Activation code.

QR code method - Select scan and use the mobile device's camera to

capture the QR code below.

Activation code method - Type rinnai into the enter activation code eld

and select activate.

Please note that if so prompted,

give the App permission to use the

mobile device's camera.

The activation code is case sensitive

(all lower case).

DISPLAY

TIMER

ECO

SWING

SPOT

ROOM°C

CLEAN

FRESH

SLEEP

QUIET

TURBO

ON/OFF

HEALTH

FAN

MODE

WiFi

Mobile

Data

WiFi

Nominated mobil device:

smartphone, tablet, etc

WIFI SET UP

Rinnai 5 Split AC WiFi OM

5. A Rinnai welcome page is

displayed briey to conrm a

successful activation.

The Device List page will open, select Add device to continue on to the

conguration page and the name of WiFi network selected in step 2 will

automatically ll the WiFi name: eld to conrm that this network was found.

6. Enter the password for the WiFi

network into the Password:

eld and select Start the

conguration.

The conguration process may take up to a minute or more depending

upon signal strength. The Device List page will be displayed with the new

AC device listed when conguration is complete. Repeat steps 1, 6, 7 & 8

to add additional AC devices to the current mobile device.

NOTE

If the conguration is unsuccessful, conrm that WiFi network is still up. If the WiFi network is

working correctly then repeat steps 1, 6 7 and 8.

If conguration continues to fail contact Rinnai.

Repeat steps 1 through 8 to pair additional mobile devices.

WIFI SET UP

Rinnai 6 Split AC WiFi OM

Device Editor allows customising of the App to AC device interface and access to AC device rmware updates.

NOTE

The AC device to be edited MUST BE on and connected to the WiFi Network.

Before exiting the Device Editor, Save changes, as all unsaved changes will be LOST.

Locking only restricts the ability to pair any additional mobile devices to an AC device.

To enter the Device Editor, at the

Device List page press on the Icon

to the left of the desired device's

name for 3 seconds.

To change the AC devices icon for a

specic mobile device, select Photo

icon, and follow the on screen

prompts to choose a new image.

To change the AC devices name for

all mobile devices, select the Name

text eld and type a new name (e.g.

Bedroom, Upstairs, etc).

To restrict mobile device access

select the padlock icon, blue / open

is unlocked, red / closed is locked.

To update rmware, select Firmware Upgrade, if local and server versions

are different select Upgrade, once updated both versions will be the same.

The Wi router MUST have an internet connection for rmware updates.

DEVICE EDITOR

Rinnai 7 Split AC WiFi OM

DEVICE LIST PAGE

After opening the App the Device List page is displayed, select the desired AC device that you wish to control.

STANDBY MODE PAGE

Air Conditioner is plugged in with the power turned on, but is not in an operational mode.

Select On button, opens AC device’s operational pages

Select Mildew (Fresh) button to enter dehumidifying mode

Select Clean button to enter cleaning operation

Select Display to turn the Air Conditioner’s large digital display on or off

The currently selected AC device’s name

Exit / Back button

Advanced App settings

CLEAN BUTTON

Cooling and dehumidifying operations can generate moisture inside the appliance. If the appliance is not going to

be used for a long period (in excess of one month), it is suggested to run the cleaning operation to remove dust

and moisture and avoid odours before leaving. Select the Clean button to start the cleaning operation.

NOTE

This cleaning operation takes approximately 35mins and the appliance automatically shuts off at

completion of the cleaning cycle.

Select icon/image to enter the AC device’s Edit Device page

Select Add device button to pair with additional AC devices

Select “name” to enter the AC device’s operation pages

Connection state display:

WiFi Cloud Refresh WiFi Off line

BASIC OPERATION

Rinnai 8 Split AC WiFi OM

MILDEW (FRESH)

Cooling and dehumidifying operations can generate moisture inside the appliance. Using the "FRESH" function

removes such moisture by allowing the fan to run for 3 minutes after every shut-down, avoiding odours and

keeping the unit fresh. Select the Mildew button to enable the Fresh operational mode.

DISPLAY

Turns the large digital display that is built into the appliance and illuminates through the front cover

of the indoor unit on or off.

(EXIT / BACK) BUTTON

Exits the AC device page and returns to the Device list page, or returns to previous page when in a lower sub-menu.

Selecting the (exit / back) button does not affect current operational status of the Air Conditioner.

BASIC OPERATION PAGE

On this page all basic operational controls (Heating, Cooling, Fan Speed, Set Temperature, etc) can be accessed.

ON / OFF BUTTON

When selected (and conrmed) the appliance will shut down into standby mode, the standby page is then displayed.

FAN SPEED SLIDER

The fan speed can be adjusted manually or set to automatic. The available fan

speeds are Low , Mid, High or Auto. Select "Auto" if you wish the fan speed to

be adjusted automatically by the appliance.

TEMP (TEMPERATURE) BUTTON

When selected use the temperature wheel to scroll to the desired temperature

(0.5°C increments), then choose OK to save, or Close to make no change.

OPERATIONAL ERROR WARNING

Displays when the appliance has an error or fault

condition.

NOTE

Refer to the CARE & MAINTENANCE section

of the AC device's operation manual for fault

diagnostic and clearance procedures.

(EXIT / BACK) BUTTON (Same as above)

11°C

Heating

Low

Select Temp button, to adjust set temperature

Select On/Off button, to place the AC device in Standby mode

Fan Speed slider (Low, Mid, High, Auto)

Select Mode button, to choose a basic operation mode

The currently selected AC device’s name

(exit / back) button

Advanced App settings

Current room temperature

Set temperature

Current operational mode

22.0

Operational error warning

Select a basic operation

mode or tap on the blank

area to exit tab

Swipe basic operation tab left to access advanced operations

Auto

BASIC OPERATION

Rinnai 9 Split AC WiFi OM

MODE BUTTON

This opens the basic operation mode selection tab.

HEATING

When selected this mode operates the Air Conditioner as a heating appliance (the available temperature range is

16°C ~ 32°C in 0.5°C increments).

COOLING

When selected this mode operates the Air Conditioner as a cooling appliance (the available temperature range is

16°C ~ 32°C in 0.5°C increments).

FAN

This mode uses the fan to circulate room air without changing the room temperature.

AUTO

In this mode, the fan speed, heating or cooling mode and the temperature are all adjusted automatically by the

appliance, based on the current room temperature.

The table below describes the relationship between room temperature and modes of operation when set to Auto.

Room Temperature Set Temperature Operation Mode

≥ 27°C 24°C Cooling Mode

20°C ~ 27°C 24°C Dry Mode

≤ 20°C 24°C Heating Mode

DRY (DEHUMIDIFYING)

In periods of high humidity this mode removes excess moisture from the room, in order to prevent mould and

mildew and increase comfort.

This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

ADVANCED APP SETTINGS

See Advanced Operation on the following page.

11°C

Heating

22.0

Low

11°C

Heating

22.0

Select a basic operation mode or

tap on the blank area to exit tab

BASIC OPERATION

Rinnai 10 Split AC WiFi OM

ADVANCED APP SETTINGS

Direct access to the previously described AC Device related pages Add Device and Device List, is provided,

while the third option Setting enables access to additional App and AC device related settings.

Selecting the horizontal three dots

at the top right on the relevant pages

opens the advanced App setting

dialogue box.

Ambient Temperature, this toggle

shows or hides the current room

temperature display.

Temperature Unit, used to select

either Celsius or Fahrenheit as the

display unit of measure.

software Upgrade, checks for

updates to the AC Freedom App.

Either the Wi router or mobile

device MUST have an internet

connection to get App updates.

Scan QR code, same as described

in "WiFi Set Up" on page 4.

Help, App help instructions.

ADVANCED OPERATION

Other manuals for RINV25RC

This manual suits for next models

Table of contents

Other Rinnai Air Conditioner manuals

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual