Rimage Everest User manual

Other manuals for Everest

6

This manual suits for next models

1

Table of contents

Other Rimage Disc Duplicator manuals

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage Professional 5100N User manual

Rimage

Rimage Desktop 360i Operating and safety instructions

Rimage

Rimage Allegro 100 Operating and safety instructions

Rimage

Rimage DL5200 User manual

Rimage

Rimage DL5200 Operating and safety instructions

Rimage

Rimage Producer IIIN+ 7100N User manual

Rimage

Rimage DL5200 Use and care manual

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage DL5200 User manual

Rimage

Rimage DLN5200 Operating and safety instructions

Rimage

Rimage Professional 5100N User manual

Rimage

Rimage Professional Endeavor User manual

Rimage

Rimage Producer III 7100 User manual

Rimage

Rimage 3410 User manual

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage Producer III User manual

Rimage

Rimage Catalyst 6000 User manual

Rimage

Rimage DLN5200 User manual

Rimage

Rimage Professional 3400 User manual

Rimage

Rimage Producer 8200N User manual

Rimage

Rimage Producer III 8100 Manual

Rimage

Rimage Professional 2450 User manual

Rimage

Rimage Producer III 7100 Operating and safety instructions

Popular Disc Duplicator manuals by other brands

Riso

Riso CV Series Setting manual

MicroBoards Technology

MicroBoards Technology GX-2 user manual

Addonics Technologies

Addonics Technologies HDUS325DX user guide

Carry

Carry Pro118 user guide

CopyPro

CopyPro PowerPro II user manual

Primera

Primera Max user manual

Logicube

Logicube EchoPlus-NG user manual

Silca

Silca Delta 2000 SA operating manual

Reflex7

Reflex7 Daisy Chain Series user manual

Vinpower Digital

Vinpower Digital SharkCopier DC user manual

Codonics

Codonics Virtua E manual

Octave

Octave Copy Master II user guide

Kanguru

Kanguru U2-DVDDUPE-S user guide

StarTech.com

StarTech.com 8STSATDUP11 manual

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Service manual

Addonics Technologies

Addonics Technologies UDFH7 user guide

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 user manual

Addonics Technologies

Addonics Technologies CFASTD5 user guide

Recovery Disc Instructions for the Producer III Embedded

Producer III Embedded Recovery Disc

Instructions (Everest Printer)

This is an emergency system recovery process and should be used to recover the system’s

default configuration.

-Important: Ensure there are no other embedded Rimage AutoLoaders named

RimageProducer3 actively running on the network.

Note: If this unit is not attached to a network, a monitor, mouse and keyboard must be

connected to the back of the embedded unit.

1. With the unit powered on:

a. Insert the Recovery Disc in the recorder tray marked Drive 1 (top drive).

b. Press and hold the PC power button on the front of the unit until the unit powers off.

c. Press the PC power button again to power on the unit.

2. The application starts automatically and recovery begins.

3. When the operator panel displays REMOVE DISC THEN REBOOT SYSTEM (approximately

10 minutes):

a. Remove the recovery disc from the recorder tray.

b. Press and hold the PC power button until the unit powers off.

c. Press the PC power button again to power on the unit. The system initializes.

4. Watch the operator panel for the prompt: REMOTE LOGON TO: RIMAGEPRODUCER3

(approximately 5 minutes).

5. Continue the recovery:

•If the unit is attached to a network, log on to the system using Remote Desktop

Connection on a separate computer.

Note: See the Rimage Advanced Setup Guide for instructions on accessing the

Remote Desktop Connection.

Computer: RimageProducer3

User Name: Administrator

Password: password

Note: The Password is case sensitive.

Domain: leave blank

•If the unit is not attached to a network, continue the recovery process using the attached

monitor, mouse and keyboard.

6. The Found New Hardware Wizard for the Everest III printer drive displays:

a. Select Install the software automatically (Recommended).

b. Select Next.

c. Select Finish when the installation is complete.

7. From the desktop, select Restart found on the computer desktop. A system shutdown

message displays.

8. When the system has fully initialized, log on to the system. Refer to step 5 for log on

information.

Note: You cannot log on until the system initializes. This may take several minutes.

9. Change the computer name (optional). See the Rimage Advanced Setup Guide for

instructions.

2000026_A 1