Addonics Technologies CFASTD5 User manual

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v8.1.11

www.addonics.com

T E C H N O L O G I E S

User Guide

1:5 CF or CFAST Duplicator

(CFASTD5 / CFD5)

ENT

ESC

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Diagram

ENT

ESC

ENT

ESC

Duplicator Panel

Source Slot

(CF or CFAST)

Target Slot 1

Target Slot 2 Target Slot 4

Target Slot 3

Target Slot 5

Power Switch

Power LED

Flash Reader LEDs

LCD

Scroll Up

Scroll Down

Executes Function

Cancels Function

Front View

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Functions

The copy controller has11 functions in total, with the 11th (Adv Setup) being a hidden system

function that only appearswhen the ESCkey ispressed for 2 seconds until there isa beep. These

are shown below.

10-01. Language

10-02. Copy Size

10-03. S tart up Menu

10-04.Auto Compare

10-05. Button Sound

10-06. Device Info

10-07. S ystemInfo

10-08. Fast Copy

10. Setup

10-09.Auto S tart Drive

10-10.Auto S tart Timer

10-11. Tolerance Size

Duplicator Controller

1. Copy HDD

2.Async Copy HDD

3. Compare HDD

4.Async Compare

5. PreScanSource

6. ReScanBUS

7. Source Size

11.Adv Setup

11-01. Read Error Skip

11-02. Update Firmware

11-03. Compare Firmware

11-04. Quick Erase HDD

11-05. Full Erase HDD

11-06. H/W Diagnostic

11-07. Load Default

8. S ecure Eras e

9. Overwrite

10-12. BootTime Delay

10-13. Quick Compare

11-08. Copy HPA

11-09. Burn In

10. Setup

11.Adv Setup

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Copy HDD

The LCD will show the following info during the copyin

g process: elapsed time, completed

percentage.The copy speed, capacityand time will vary

depending on the source hard disk. Once

the copying process is complete the LCD will display t

he following results.

Copy-36MB/s 0%

232.9GB 00:00:00

CopyHDD

OK: 11 Fail: 0

1. Copy HDD

HDD:11 232.9GB

Async Copy HDD

This option is used to specify the size of the source for simplifying further copying operations.

Choose option 2 from the menu:

2. Async Copy HDD

HDD:10 232.9GB

Space Not Enough

And then automatically copies. The LCD will display t

he following info.

Acpy-36 MB/s

232.9GB 00:00:00

Async Copy HDD

OK: 11 Fail : 0

Compare

Compare HDD is used to see if the data on a source ha

rd disk is identical to the target hard disk

after the Copy HD operation.

Choose option 3 from the menu:

Copy HDD copies data directly from the source hard disk to the target hard disk. Please make

sure that the capacity of the target hard disk is equal or larger than the source hard disk.

Choose option 1 from the menu:

Press ENT to begin copy. The system will auto-detect the hard disks and show the following

copying info on the LCD.

Press ENT . Before the start of the reproduction, if the console detects that a hard drive

capacity is less than source, then the LCD will show the corresponding channel number.

If the replication process to continue to add additional hard disk device, LCD will only show the last

completed percentage.

Once the copying process is complete the LCD will display the following results.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

3. Compare HDD

HDD: 11 232.9GB

Press ENT to begin the comparison. The LCD will displaythe following info.

Comp-23MB/s 0%

232.9GB 00:00:00

Once thecomparison is complete the LCD will display the following info as well as the amount of

data on the source hard disk.

Compare OK:11

Fail: 0 Di

PreScan Source

PreScan HDD is used to check if the source hard disk can be accessed properly.

It alsotests the read speed.

Choose option 5 from the menu:

5. PreScan Source

HDD: 11 232.9GB

Async Compare

Compare HDD is used to seeifthe data ona sourcehard disk is identical to the

target hard disk after the Copy HDD operation. While compare process is

on-going, allows you to plug-in additional target drives and comparison will

automatically start for the added target drive.

Choose option 4 from the menu:

4. Async Compare

HDD: 11 232.9GB

Press ENT to begin the async comparison. The LCDwill display the following info.

ACmp-23MB/s 0%

232.9GB 00:00:00

Compare OK:11

Fail: 0

If the comparison process continuesto add additional hard diskdevice, LCD will only show the

last completed percentage.

Once the copying process is complete the LCDwill display the following results.

Press ENTto begin scan. The LCD will display the following info

Scan-90MB/s 1%

230.6GB00:00:27

Once the scan is complete the LCD will display the corresponding results

PreScan OK!

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

6. ReScan BUS

ReScan Bus

Choose option 6 from the menu:

Press ENT to re-scan hardware. The LCD will display the following info:

Re-Scan BUS NOW?

Yes

When the scan is complete the LCD will display the following info:

Bus re- scan OK !

7. Source Size

Source Size

Source Size is used to show the capacity of the source.

Choose option 7 from the menu:

Press ENT and the LCDwill show the following info.

HDD: Hitachi

Size: 232.9GB

Then press ENT and the LCD will showthedata's size info.

HDD: Hitachi

Data:200.9GB

8. Secure Erase

Secure Erase

Secure Erase is used to wipe the data of the hard disk, i t will erase all of HDD of duplicator

(included Source HDD).

Choose option 8 from the menu:

Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose

Yes.

Wipe all data.

Continue?No

Press ENT and the LCD will show the following info.

ReScan Bus allows swapping the source or target in and out without having to

reboot the system.

In Process

Elapsed 01:00

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

10. Setup

Setup

Setup allows various system settings to be changed.There are 12 sub-options:

Language, Copy Size, Startup Menu, Auto Compare, ButtonSound, Device Info,

System Info, Fast Copy, Auto Start Drive, Auto Start Timer, Tolerance Size and

Boot Time Delay.

Choose option 8 fromthe menu:

9. Overwrite

Overwrite

Overwrite is used to overwrite the data of the hard disk, it will erase all HDDs connected to the duplicator

(including Source HDD). There are 3 sub-options: One pass, 3 pass and 7 pass.

Choose option 9 from the menu:

Press ENT to access option. By default it is One pass Use the Up and Down arrow keys to choose

other options.

9-01. Overwrite

One pass

Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose

Yes.

Wipe all data.

Continue?No

Press ENT and the LCD will show the following info.

In Process

Elapsed 01:00

Language

This option is used to select the system's language support. By default this is set to English. Press

ENT to change the Language settings.

Language

English

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

10-02. Setup

CopySize

Press ENT and the LCD will display a detailed list of options as shown below

Use the Up and Down arrow keys to choose different copy sizes. The system will offer their

corresponding percentages so the user can specify the amount to copy from the source hard disk.

Press ENT to confirm and save the changes.

Copy Size

100%~1% (*MB)

Startup Menu

This option a llows you to set an option other than “Setup” to be displayed as the first available

option on the menu every time you start the system.

Startup Menu

1. Copy HDD

Press ENT then use the Up and Down arrow keys to choose other options. By default the first

menu option is Copy HDD.

10-03. Setup

Start up Menu

Auto Compare

This option automatically comparesthe source hard disk with the target hard disk after a copy

operation is completed.

Auto Compare

10-04. Setup

Auto Compare

Copy Size

This option is used to specify the size of the source hard disk for simplifying further copying

operations.

Button Sound

This option is used to control the sound of a button when you press it.

10-05. Setup

Button Sound

Press ENT and the LCD will display the following info. Use the Up and Down arrow keys to choose

whether button sound is on or 0.

Button Sound

Press ENT to access option. By default it is set to 0. Use the Up and Down arrow keys to choose

On.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Device Info

This option is used to display the details of all hard disks connected to the copy controller.

10-06. Setup

Device Info

Press ENT and the LCD will display each hard disk' information in order as shown below.

0 Source CH: 0

Hitachi 232.9GB

System Info

This option displays system information.

10-07. Setup

System Info

Fast Copy

This option displays Fast Copy. Fast Copyonly copies data on the source drive

to the target drives. Currentlyonly supports FAT, FAT32, NTFS, HFS, Ext2 and

Ext3 partitions.

10-08. Setup

Fast Copy

Auto Start Drive

This option is used to display to copy automatically once you insert HDD on target port.

10-09. Setup

Auto Start Drive

Auto Start Timer

This option is used to set the period of time when the duplicator starts copying

automatically once you insert HDD on target port. Defaultis set at OFF, use the

arrows to choose time. 10-10. Setup

Auto Start Timer

Press ENT to enter the following figure. The default is 0. Use the Up and Down arrow keys to

choose 1-11.

Press ENT and the LCD will display the following info. Use the Up and Down arrow keys to choose

whether fast copy is on or 0. (This function currently only effective in FAT, FAT32, NTFS, HFS,

Ext2 and Ext3 partitions.)

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Auto Start Timer

Tolerance Size

10-11. Setup

Tolerance Size

1MB

BootTime Delay

This option is used to to set boot delay time.

10-12. Setup

BootTime Delay

5 sec

QuickCompare

This option is used to set the size of each comparison unit.

10-13. Setup

Quick Compare

Press ENT to enter the following figure. The default is 0. Use the Up and Down arrow keys to

choose 1 Byte/1K/10K/100K/1MB/10MB/100 Mbytes. (In order to improve the accuracy of pure

data can maintain the default settings.)

Quick Compare

Press ENT to enter the following figure. The default is 0. Use the Up and Down arrow keys to

choose 1MB~100MB of source.

This option is used to set the tolerance in terms of percentage difference between

the source and target capacity. This is to ensure that when the target drive is

smaller than the source drive, the duplication process will not start.

Press ENT to enter the following figure. The default is 0. Use the Up and Down arrow keys to

choose 5 Sec-50 Sec.

Press ENT to enter the following figure. The default is 5 sec. Use the Up and Down arrow keys to

choose 0~99 sec.

This manual suits for next models

Table of contents

Other Addonics Technologies Disc Duplicator manuals

Addonics Technologies

Addonics Technologies DGBRC3 User manual

Addonics Technologies

Addonics Technologies HDUSI325-A User manual

Addonics Technologies

Addonics Technologies Jasper II 1S JD2-325SN User manual

Addonics Technologies

Addonics Technologies DGC3 User manual

Addonics Technologies

Addonics Technologies DDU3SAS User manual

Addonics Technologies

Addonics Technologies ST55HPMXA User manual

Addonics Technologies

Addonics Technologies HDUSI325 User manual

Addonics Technologies

Addonics Technologies UDFH15-C User manual

Addonics Technologies

Addonics Technologies MSHDU11T User manual

Addonics Technologies

Addonics Technologies Jasper II 3M User manual

Addonics Technologies

Addonics Technologies HD4SNH User manual

Addonics Technologies

Addonics Technologies Jasper II SID User manual

Addonics Technologies

Addonics Technologies JD2-3SN25 User manual

Addonics Technologies

Addonics Technologies HDUS325DX User manual

Addonics Technologies

Addonics Technologies ZHDUESA User manual

Addonics Technologies

Addonics Technologies AEDVDCOPPM4U User manual

Addonics Technologies

Addonics Technologies HDUS11325DX User manual

Addonics Technologies

Addonics Technologies ST5DVRE User manual

Addonics Technologies

Addonics Technologies HD9SITDRHS User manual

Addonics Technologies

Addonics Technologies HDUS11NB User manual

Addonics Technologies

Addonics Technologies DigiCopier III DGC3 User manual

Addonics Technologies

Addonics Technologies HDUSAS User manual

Addonics Technologies

Addonics Technologies MSDU5 User manual

Addonics Technologies

Addonics Technologies DGBRC1 User manual

Popular Disc Duplicator manuals by other brands

Riso

Riso CV Series Setting manual

MicroBoards Technology

MicroBoards Technology GX-2 user manual

Carry

Carry Pro118 user guide

CopyPro

CopyPro PowerPro II user manual

Primera

Primera Max user manual

Logicube

Logicube EchoPlus-NG user manual

Silca

Silca Delta 2000 SA operating manual

Reflex7

Reflex7 Daisy Chain Series user manual

Vinpower Digital

Vinpower Digital SharkCopier DC user manual

Codonics

Codonics Virtua E manual

Octave

Octave Copy Master II user guide

Kanguru

Kanguru U2-DVDDUPE-S user guide

StarTech.com

StarTech.com 8STSATDUP11 manual

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Service manual

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 user manual

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 user manual

Telex

Telex SpinWise user guide

Aleratec

Aleratec 260206 quick start guide