Rimage DL5200 Operating and safety instructions

110797_C

Rimage DL5200™ Setup and Installation

Before you begin:

Obtain a PC that meets the PC speciﬁcations

listed in your DL5200 User Guide.

This document is intended for people who are

familiar with hardware setup, software installation,

and Windows operating systems. If you do not

understand the procedures in this document, ask

your computer technician for help or refer to your

PC documentation.

Set up the PC.

a. Power down the PC.

b. If your PC does not have a

FireWire card, install the FireWire/

USB card included with your

DL5200.

Prepare the DL5200.

Tape

a. On the DL5200, remove

the tape from the front

cover.

b. Remove the front

cover.

c. Inside the DL5200,

remove the tape from

the transfer slides.

d. Remove the tape

from the supply bin.

e. Remove the tape from

the printer mounting

plate.

Set up your printer.

a. Unpack the Everest printer.

Refer to the Everest Unpacking

and Setup Instructions included

with your Everest printer.

b. Place the printer on the

DL5200 so that the plastic feet

slide into the slots on the printer

plate.

Printer plate

Slots for feet

110797_C

Connect the printer cables.

a. Connect the short

power cord from

the DL5200 to the

printer.

b. Connect the printer

cable from the DL5200

to the printer.

c. Connect the D-shaped cable from the

DL5200 to the printer as indicated by the

D-shaped label.

Ribbons

Foam

Printer

Box

Guide

a. Power on the PC.

b. Place the Rimage software CD in the PC disc drive.

Note: If the software installation does not start automatically,

navigate: Start > Run and browse to the Setup.exe ﬁle on the

software CD.

c. Follow the onscreen prompts to complete the software installation.

Connect the DL5200 cables.

110797_C

a. Connect the USB cable from

the DL5200 to the PC USB port.

b. Connect the FireWire cable from the

DL5200 to the PC FireWire port.

Install the front cover.

c. Connect the power cord from the

DL5200 to a power outlet.

Important! Do not power

on the DL5200 until you are

instructed to do so.

Install the Rimage Software.

Important! You must have administrative privileges to

install the software on the PC.



Activate your Rimage Software. Install the printer driver.

Learn more.

110797_C

For information about submitting orders to the DL5200

across a network, refer to the Advanced Setup Guide.

For information about operating and maintaining the

DL5200, refer to the DL5200 User Guide included with

your product.

For additional support and product information, go to

www.rimage.com/support.html.

You have 30 days to activate your Rimage software.

Until your software is activated, you will be prompted

to activate your software each time you use the

Rimage software.

When the activation dialog displays, select an option

and follow the onscreen prompts to activate your

software.

Important! You must have administrative privileges to

install the printer driver on the PC.



a. With the Rimage software CD in the PC disc drive, navigate:

Start > Run > and browse to the Rimage software CD.

b. On the Rimage software CD, navigate: Printer Drivers >

Everest2 > SETUP.

c. Select Open.

d. Select OK.

e. Follow the prompts and

select FILE: for the printer port.

f. Press the power switch to power on the

DL5200. The DL5200 initializes and the

PC operating system locates the new

hardware.

g. Follow the prompts to complete the

installation.

Install the recorder driver.

a. Navigate: Start > All Programs > Rimage > Utilities > Update

Recorder Driver. The CDRec2K Driver Installer window

opens.

b. When the CDRec2K Driver Installer window indicates that

the Cdrec2k.sys driver installed successfully, select OK. The

CDRec2K Driver Installer window closes.

c. Restart the PC. The DL5200 is ready for use.

Other manuals for DL5200

Table of contents

Other Rimage Disc Duplicator manuals

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage Everest Operating and safety instructions

Rimage

Rimage DL5200 User manual

Rimage

Rimage Producer III User manual

Rimage

Rimage DLN5200 User manual

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage Producer III 7100 User manual

Rimage

Rimage Producer IIIN+ 7100N User manual

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage Professional 5100N Operating and safety instructions

Rimage

Rimage DLN5200 Operating and safety instructions

Rimage

Rimage Allegro 20 User manual

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage Professional 2450 User manual

Rimage

Rimage Catalyst 6000 User manual

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Operating and safety instructions

Rimage

Rimage DL5200 User manual

Rimage

Rimage DL5200 Use and care manual

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 User manual

Rimage

Rimage Professional 5100N User manual

Rimage

Rimage Professional 3400 Quick start guide

Rimage

Rimage Producer III 7100 User manual

Rimage

Rimage Allegro 20 Operating and safety instructions

Rimage

Rimage Producer III 7100 User manual

Popular Disc Duplicator manuals by other brands

Riso

Riso CV Series Setting manual

MicroBoards Technology

MicroBoards Technology GX-2 user manual

Addonics Technologies

Addonics Technologies HDUS325DX user guide

Carry

Carry Pro118 user guide

CopyPro

CopyPro PowerPro II user manual

Primera

Primera Max user manual

Logicube

Logicube EchoPlus-NG user manual

Silca

Silca Delta 2000 SA operating manual

Reflex7

Reflex7 Daisy Chain Series user manual

Vinpower Digital

Vinpower Digital SharkCopier DC user manual

Codonics

Codonics Virtua E manual

Octave

Octave Copy Master II user guide

Kanguru

Kanguru U2-DVDDUPE-S user guide

StarTech.com

StarTech.com 8STSATDUP11 manual

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Service manual

Addonics Technologies

Addonics Technologies UDFH7 user guide

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 user manual

Addonics Technologies

Addonics Technologies CFASTD5 user guide