Rigol DS1000 Series User manual

User’s Guide RIGOL

Publication number UGA02107-1110

Dec. 2009

DS1000 Series Digital Oscilloscopes

RIGOL

User‟s Guide for DS1000 Series

RIGOL products are protected by patent laws in and outside of the P.R. China.

Information in this publication replaces all previous corresponding material.

RIGOL reserves the right to modify or change part of or all the specifications and

pricing policies at company‟s sole decision.

NOTE: RIGOL is registered trademark of RIGOL Technologies, Inc.

RIGOL

User‟s Guide for DS1000 Series

Safety Notices

Review the following safety precautions carefully before operating the instrument to

avoid any personal injuries or damages to the instrument and any products connected

to it.

To avoid potential hazards use the instrument as specified by this user‟s guide only.

The instrument should be serviced by qualified personnel only.

To Avoid Fire or Personal Injury.

Use Proper Power Cord. Use the power cord designed for the instrument and

authorized in your country only.

Ground The Instrument. The oscilloscope is grounded through the grounding

conductor of the power cord. To avoid electric shock the instrument grounding

conductor(s) must be grounded properly. Before making connections to the input or

output terminals of the instrument.

Connect The Probe. The probes‟ ground terminals are at the same voltage level of

the instrument ground. Do not connect the ground terminals to a high voltage.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and marks on the instrument. Follow the user‟s guide for further ratings information

before making connections to the instrument.

Do Not Operate Without Covers. Do not operate the instrument with covers or

panels removed.

Use Proper Fuse. Use the fuse of the type, voltage and current ratings as specified

for the instrument.

Avoid Circuit or Wire Exposure. Do not touch exposed connections and

components when power is on.

Do Not Operate With Suspected Failures. If suspected damage occurs with the

RIGOL

User‟s Guide for DS1000 Series

III

instrument, have it inspected by qualified service personnel before further operations.

Provide Proper Ventilation. Refer to the installation instructions for proper

ventilation of the instrument.

Do not operate in wet/damp conditions

Do not operate in an explosive atmosphere

Keep product surfaces clean and dry

The disturbance test of all the models meet the limit values of A in the

standard of EN 61326: 1997+A1+A2+A3, but can’t meet the limit values of

RIGOL

User‟s Guide for DS1000 Series

Measurement Category

The DS1000 series Digital Oscilloscope is intended to be used for measurements in

Measurement Category I.

Measurement Category Definitions

Measurement Category I is for measurements performed on circuits not directly

connected to MAINS. Examples are measurements on circuits not derived from MAINS,

and specially protected (internal) MAINS derived circuits. In the latter case, transient

stresses are variable; for that reason, the transient withstand capability of the

equipment is made known to the user.

WARNING

IEC Measurement Category I. The input terminals may be connected to circuit

terminal in IEC Category I installations for voltages up to 300 VAC. To avoid the

danger of electric shock, do not connect the inputs to circuit‟s voltages above 300

VAC.

Transient overvoltage is also present on circuits that are isolated from mains. The

DS1000 series Digital Oscilloscopes is designed to safely withstand occasional

transient overvoltage up to 500 Vpk. Do not use this equipment to measure circuits

where transient overvoltage could exceed this level.

RIGOL

User‟s Guide for DS1000 Series

Safety Terms and Symbols

Terms in This Guide. These terms may appear in this guide:

WARNING: Warning statements identify conditions or practices that could

result in injury or loss of life.

CAUTION: Caution statements identify conditions or practices that could

result in damage to this product or other property.

Terms on the Product: These terms may appear on the product.

DANGER : indicates an injury hazard may be immediately accessible.

WARNING :indicates an injury hazard may be not immediately accessible.

CAUTION: indicates that a potential damage to the instrument or other property

might occur.

Symbols on the Product: These symbols may appear on the Instrument:

Hazardous

Voltage

Refer to

Instructions

Protective

Earth Terminal

Test

Grounding

Terminal

Grounding

Terminal

of Chassis

RIGOL

User‟s Guide for DS1000 Series

General-Purpose Oscilloscopes

RIGOL DS1000-Series Digital Oscilloscopes offer exceptional waveform viewing

and measurements in a compact, lightweight package. The DS1000 series is ideal for

production test, field service, research, design, education and training involving

applications involving analog/digital circuits test and troubleshooting, as well as

education and training.

Each of these oscilloscopes gives you:

Dual Channel, Bandwidth:

100MHz (DS1102CD, DS1102C, DS1102MD, DS1102M)

60MHz (DS1062CD, DS1062C, DS1062MD, DS1062M)

40MHz (DS1042CD, DS1042C, DS1042MD, DS1042M)

25MHz (DS1022CD, DS1022C, DS1022MD, DS1022M)

Optional 16 digital channels (DS1000xD), each channel can be turned on or off

independently, or in a 8 bit group

Mono/Color TFT LCD Displays at 320×234 resolution

USB storage and printing supports, firmware upgradeable via USB connectivity

Adjustable waveform intensity, more effective waveform viewing

One-touch automatic setup for ease of use (AUTO)

Saves 10 Waveforms, 10 setups, supports CSV and bitmap format

Newly designed Delayed Scan Function, easy to give attention to both details and

overview of a waveform

20 Automatic measurements

Automatic cursor tracking measurements

Waveform recorder, record and replay dynamic waveforms

User selectable fast offset calibration

Built-in FFT function, Frequency Counter

Digital filters, includes LPF, HPF, BPF, BRF

Pass/Fail Function, optically isolated Pass/Fail output

Add, Subtract and Multiply Mathematic Functions

Advanced trigger types include: Edge, Video, Pulse width, Slope, Alternative,

Pattern and Duration (DS1000xD)

Adjustable trigger sensitivity

RIGOL

User‟s Guide for DS1000 Series

VII

Multiple Language User Interface

Pop-up menu makes it easy to read and easy to use

Built-in Chinese and English help system

Easy-to-use file system supports Chinese & English characters key-in

RIGOL

User‟s Guide for DS1000 Series

VIII

Structure of This Document

Chapter1 Quick Start

To introduce the panls and menus to help user to realize the base operations.

Chapter 2 Operating Your Oscilloscope

More details to help users to understand the functions and measurements of

instrument deeply.

Chapter 3 Application &Examples

To show the measurement functions directly by application examples.

Chapter 4 Prompt message &Troubleshooting

To offer some methods to help users to solve the truobles during operations.

Chapter 5 Specifications

List common specifications and characteristics of DS1000 series oscilloscope.

Chapter 6 Appendix

Information about accessories, warranties, services and supports and the like.

Other manuals for DS1000 Series

Table of contents

Other Rigol Test Equipment manuals

Rigol

Rigol DS1102E User manual

Rigol

Rigol MSO1000Z series User manual

Rigol

Rigol DS1000E series Installation and operation manual

Rigol

Rigol MSO2000A Series User manual

Rigol

Rigol RP7000 Series User manual

Rigol

Rigol SA5000 Series Operating instructions

Rigol

Rigol DL3000 Series User manual

Rigol

Rigol DHO1000 Series User manual

Rigol

Rigol HDO1000 Series User manual

Rigol

Rigol DS2000 Series User manual

Rigol

Rigol DS2000E Series Operating instructions

Rigol

Rigol DHO1000 Series User manual

Rigol

Rigol DHO924 User manual

Rigol

Rigol MSO1000Z series User manual

Rigol

Rigol DS70000 Series User manual

Rigol

Rigol MSO4000 Series User manual

Rigol

Rigol RP7000S Series User manual

Rigol

Rigol MSQ7054 User manual

Rigol

Rigol DS1000D series User manual

Rigol

Rigol DS2000E Series User manual

Rigol

Rigol DS6000 Series User manual

Rigol

Rigol MSO5152-E User manual

Rigol

Rigol DS6000 Series User manual

Rigol

Rigol RP1018H User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual