Ricoh Beluga-C1 Installation guide

Beluga-C1/C1.5 Training

Slide 1

D046/D049/D154/D155

COPIER TRAINING

Introduction

No additional notes

Beluga-C1/C1.5 Training

Slide 2

Introduction

This is a digital black-and-white wide-format

machine with 600 dpi resolution for scanning and

printing.

The controller is a GW controller. A Ratio

controller is also available for the D046/D049

only.

This is a combined training course for the

D046/D049 (BE-C1.0) and D154/D155 (BE-C1.5)

machines.

(The D154/D155 machines are minor upgrades to the

D154/D155.)

PREPARATION CHECK LIST

Provide the relevant manuals and any additional handouts you feel are

necessary. Special tools are listed in the parts catalog.

Description Quantity Remarks

Service Manual 1 per trainee Give copies to the trainees

Operation Manual 1 per trainee Give copies to the trainees

Training Schedule 1 per trainee Give copies to the trainees

Instructor’s guide and presentation 1 set Instructor only

Training machines 1 for every 3

trainees Have the trainees

completely install these

during class.

Special Tools 1 set per

machine As necessary

Beluga-C1/C1.5 Training

Slide 3

Objectives

Install the machine and its peripherals in the

field.

Understand and perform routine maintenance.

Understand the PM table.

Understand the important SP codes.

Troubleshoot and repair this product in the field.

ORIENTATION

Provide the trainees with information about the training course procedures,

facilities, objectives and rules.

Introduction of instructors

Introduce yourself to the class, and any other instructors who will be taking part.

Tell them who to talk to if they have any problems.

Introduction of trainees

Distribute a list of those attending the course.

Try to generate a friendly and relaxed atmosphere, and encourage the class to

get to know each other.

If it will help, have the trainees introduce themselves (name, company, work

experience).

Explanation of curriculum

Pass out copies of the training schedule

Impress the importance of getting to the class on time

Go over the course objectives (key points listed on the slide).

Explanation of training center rules

Explain the general rules of your training center (smoking, breaks, use of

facilities, etc.)

Explain the tools and equipment available at the facility.

Impress on the trainees that they should not touch the machines until the

instructor says so, and that they are responsible for replacing tools and keeping

the classroom in order.

Beluga-C1/C1.5 Training

Slide 4

D046/D049/D154/D155

COPIER TRAINING

Course Overview

No additional notes

Beluga-C1/C1.5 Training

Slide 5

Course Overview

Product Outline

Specifications

Installation

Machine Overview

Scanning

Processes Around the Drum

Exposure

PRODUCT OUTLINE

The model will be introduced.

The optional peripherals will be introduced.

The product concept, sales points, and targets will be presented.

SPECIFICATIONS

The main specifications will be given. Significant items will be stressed.

INSTALLATION

Installation of the machine and the peripherals will be covered.

Firmware upgrade will be covered.

MACHINE OVERVIEW

The components will be discussed briefly.

The copy process will be outlined.

The machine’s organization and overall PCB structure will also be covered.

SCANNING

The scanner mechanism and sensors will be described.

The optional document feeders will be dealt with in a later section.

PROCESSES AROUND THE DRUM

Drum drive, charge, drum cleaning, quenching, and other processes around the

drum will be described

EXPOSURE

The latent image writing mechanism will be described.

This machine uses LED arrays.

Beluga-C1/C1.5 Training

Slide 6

Course Overview

Development and Toner Supply

Paper Feed and Cutting

Image Transfer, Paper Separation, and Paper

Transport

Fusing

Paper Exit

Maintenance

Optional Paper Cassette

DEVELOPMENT AND TONER SUPPLY

The development process will be described.

Toner supply mechanisms and toner density control will also be described.

Toner end detection will also be described.

PAPER FEED AND CUTTING

The paper feed mechanisms for the main body will be described.

The cutter will also be described.

The optional feed unit mechanisms are the same as for the main body, so do not

require a separate section.

IMAGE TRANSFER, PAPER SEPARATION, AND PAPER TRANSPORT

Image transfer and paper separation mechanisms will be described.

Transport from the drum to the fusing unit will be explained.

FUSING

Fusing will be described.

PAPER EXIT

The paper feed out mechanisms will be described.

MAINTENANCE

PM is described briefly.

OPTIONAL PAPER CASSETTE

This describes the optional paper cassette mechanisms.

OPTIONAL FOLDER

This describes the mechanisms in the optional fan folder and cross folder.

Beluga-C1/C1.5 Training

Slide 7

D046/D049/D154/D155

COPIER TRAINING

Product Outline

PURPOSE OF THIS SECTION

The model will be introduced.

The optional peripherals will be introduced.

The product concept, sales points, and targets will be presented.

Beluga-C1/C1.5 Training

Slide 8

How many models?

D046: Beluga-C1a

D049: Beluga-C1b

D154: Beluga-C1.5a

D155: Beluga-C1.5b

Differences

Maximum scan length

» D046/D154: 15 m (590”)

» D049/D155: 30 m (1180”)

Copy speed

» D046/D154: 120mm/s, 10 cpm (A1/D LEF), 5 cpm (A0/E LEF)

» D049/D155: 170mm/s, 14 cpm (A1/D LEF), 7 cpm (A0/E LEF)

Fusing lamps and hot roller are different

No additional notes

Beluga-C1/C1.5 Training

Slide 9

What is new with the D154/D155?

New functions

New counter specification (Available as a cost recovery

application)

- Additional count of large format sizes

- Length and area count logging

Scan to USB memory/SD card

(using USB2.0/SD Slot Type I)

"Scan to Color Print" (using PrintCopy Tool)

The security (Data overwrite security unit) and encryption

(HDD encryption unit) unit are pre-installed in the

D154/D155.

Newly developed options/peripherals

USB2.0/SD Slot Type I

PrintCopy Tool

"Scan to Color" requires a color capable printer that can be accessed via

network.

The D046/D049 machines continue to use these options:

¾Data Overwrite Security Unit Type H

¾HDD Encryption Unit Type A

Beluga-C1/C1.5 Training

Slide 10

Discontinued Options

The following peripherals were not launched.

Bridge Unit BU6500 (D407)

Folder FD6500A (B889)

Manual Feeder (D333)

Folder FD6500B (Cross Folder) (B890)

(These units were listed in the first version of this

training course but were cancelled prior to product

launch.)

No additional notes.

This manual suits for next models

Table of contents

Popular Copier manuals by other brands

Canon

Canon iR1210 Service bulletin

Minolta

Minolta CF910 manual 

Xerox

Xerox EC70 user guide

Oce

Oce 9800 user manual

Olivetti

Olivetti d-Copia 1800 Service manual

Minolta

Minolta Di181 manual 

Canon

Canon iR5000i Service manual

Telecrane

Telecrane F25 manual

Xerox

Xerox WorkCentre Pro 40 user manual

Canon

Canon NP6317 Service handbook

Sharp

Sharp AR-5015 N Service manual

Mita

Mita MIP-2400 Instruction handbook

Sharp

Sharp AL-2061 Operation guide

Muratec

Muratec MFX-C2280 user guide

Minolta

Minolta EP4000 Operator's manual

Triumph Adler

Triumph Adler DCC 2526 Instruction handbook

Kyocera Mita

Kyocera Mita KM-2030 Instruction handbook

Triumph Adler

Triumph Adler DC 2222 Instruction handbook