RH ARMAND FLOOR LAMP User manual
ARMAND FLOOR LAMP
PARTS ENCLOSED
(A) Shade
(sold separately)
(B) Bulb
(C) Socket Ring
(D) Socket
(E) Adjustable Pipe
(F) Knob
(G) Threaded Nipple Pipe
(H) Tripod Base
(I) Hex Nut
(J) T-Wrench
ARMAND FLOOR LAMP
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED.
This xture has been rated for up to one (1) 100-watt maximum Type
A standard incandescent lightbulb (not included), one (1) 23-watt
compact uorescent lightbulb (not included), or one (1) 12-watt LED
lightbulb (not included); 8.8-watt LED lightbulb included. To avoid
the risk of re, do not exceed the recommended wattage.
WARNINGS
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when fixture is illuminated. Keep flammable materials
away from lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
THIS PRODUCT IS NOT A TOY AND HAS NO
PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
ASSEMBLY & INSTALLATION
SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE FUSE
BOX OR CIRCUIT BREAKER PANEL.
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Ax Threaded Nipple Pipe (G) to Tripod Base (H) with Hex Nut
(I) using T-Wrench (J).
3. Attach Knob (F) and Adjustable Pipe (E) onto the center stem
and adjust the height to your preference.
4. Loosen Socket Ring (C) from Socket (D).
5. Place Shade (A) (not included) onto Socket (D), then secure
with Socket Ring (C).
6. Insert Bulb (B) into Socket (D).
7. Remove the red protective plug cover from the cord with plug.
8. Plug into proper electrical outlet and test xture.
9. Assembly is complete.
CARE INSTRUCTIONS
Do not use polishes or cleaners on the fixture. Wipe clean with a
soft, dry cloth.
Other RH Home Lighting manuals
RH
RH CANNELE TASK FLOOR LAMP User manual
RH
RH Turrell Task User manual
RH
RH RONAN User manual
RH
RH MARBLE VESSEL TABLE LAMP 19 Programming manual
RH
RH VINTAGE SEWING TASK User manual
RH
RH FULCRUM User manual
RH
RH BRUTALIST CONSTRUCTIVIST TABLE LAMP User manual
RH
RH CONVESSI GRAND SWING-ARM SCONCE User manual
RH
RH Brutalist User manual
RH
RH MELANGE Programming manual
RH
RH 1940S User manual
RH
RH RIVOLI TORCHIERE User manual
RH
RH ROBESON User manual
RH
RH TREMEZZO Programming manual
RH
RH KNOX TASK User manual
RH
RH Slimline User manual
RH
RH FORTUNY STUDIO 76 User manual
RH
RH JUNEAU Programming manual
RH
RH LISEUSE 1960S User manual
RH
RH ANVERS C-TASK FLOOR LAMP Instruction Manual
