Regency P33NG3-R Quick start guide

Models: P33NG3-R

P33LPG3-R

Owners &

Installation

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

Manual

02/04/10918-537a

WARNING:

Improperinstallation,adjustment,alteration,

service or maintenance can cause injury or

property damage. Refer to this manual. For

assistanceoradditionalinformationconsult

anauthorisedinstaller,serviceagencyorthe

gas supplier.

FOR YOUR SAFETY

Do not store or use gasoline or other

ﬂammablevapoursandliquidsinthevicinity

of this or any other appliance.

Installation and service must be performed

byan authorisedinstaller,service agencyor

the gas supplier.

P33 Gas Log Fireplace

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any

appliance

Do not touch any electrical

switch: do not use any

phone in your building.

Immediately call your gas

supplierfromaneighbour's

phone. Follow the gas

supplier's instructions.

If you cannot reach your

gas supplier, call the ﬁre

department.

LISTINGS AND CODE APPROVALS

These gas appliances have been tested in

accordance with AS4553, NZS 5262 and

have been certiﬁed by the Australian Gas

Associationforinstallationandoperationas

describedintheseInstallationandOperating

Instructions.

Yourunitshouldbeservicedannuallyby

an authorised service person.

Regency®P33 Gas Log Fireplace

TO THE NEW OWNER:

Congratulations!

Youaretheownerofastate-of-the-artGasLogFireplaceby FPIFIREPLACEPRODUCTSINTERNATIONAL.

The P33 has been designed to provide you with all the warmth and charm of a wood ﬁreplace at the ﬂick

of a switch. The model P33 has been approved by the Australian Gas Association for both safety and

efﬁciency. As it also bears our own mark, it promises to provide you with economy, comfort and security for

many trouble free years to follow. Please take a moment now to acquaint yourself with these instructions

and the many features of your Regency®Fireplace.

Regency®P33 Gas Log Fireplace 3

TABLE OF CONTENTS

DATA BADGE

Data Badge ..................................................................4

INSTALLATION

Important Message ......................................................5

Before You Start ............................................................5

General Safety Information............................................5

Manufactured Mobile Home Additional Requirements ..5

Installation Checklist......................................................6

Locating Your Fireplace.................................................6

Unit Dimensions ............................................................6

HeatWave Duct System Option Kit ...............................6

Clearances Combustible Mantels..................................7

Mantel Leg Clearances..................................................7

Framing and Finishing...................................................8

Unit Assembly Prior to Installation.................................9

Flueing Introduction.......................................................9

Exterior Flue Termination Locations............................10

Regency®Direct Flue System (Flex)..........................11

Horizontal Terminations Only...............................11

Installation Procedures........................................12

Simpson Dura-Vent Flueing.........................................13

Simpson Dura-Vent Flueing Components List.............14

Flueing Arrangements - Vertical Terminations............15

Flueing Arrangements - Horizontal Terminations.........17

Vertical Termination With Co-linear Flex System.........22

Horizontal Terminations...............................................24

Vertical Terminations ...................................................25

Gas Line Installation....................................................25

Pilot Adjustment...........................................................26

Gas Pipe Pressure Testing..........................................26

S.I.T. Valve Description................................................26

Conversion Kit #433-968 from NG to LPG..................27

Conversion Kit #434-967 from NG To ULPG...............29

Conversion Kit #434-965 from NG To ULPG...............31

Optional Brick Panels..................................................33

Log Set Installation......................................................33

Standard Flush Door ...................................................35

Flush Louvers..............................................................35

Wall Thermostat ..........................................................36

Optional Wall Switch....................................................36

Wiring Diagram ...........................................................37

OPERATING INSTRUCTIONS

Copy of the Lighting Plate Instructions........................38

Operating Instructions .................................................39

Lighting Procedure ......................................................39

Shutdown Procedure...................................................39

First Fire ......................................................................39

Aeration Setting...........................................................39

MAINTENANCE

Maintenance Instructions.............................................40

Gold-plated or Brass Louvers/trim...............................40

Log Replacement ........................................................40

Normal Operating........................................................40

Sounds of Gas Appliances ..........................................40

Thermopile / Thermocouple.........................................41

Glass Gasket...............................................................41

Door Glass...................................................................41

Fan Replacement........................................................41

Removing Valve...........................................................42

Installing Valve.............................................................42

PARTS LIST

Main Assembly ............................................................43

Burner & Log Assembly...............................................44

Flush Front & Louvers.................................................45

Bay Front & Louvers....................................................46

WARRANTY

Warranty ....................................................................47

Regency®P33 Gas Log Fireplace

DATA BADGE

This is a copy of the label that accompanies each P33 Gas Fireplace.

We have printed a copy of the contents here for your review.

DO NOT

OPERATE THIS APPLIANCE BEFORE READING THE

INSTRUCTIONS BOOKLET.

PLACE ARTICLES ON OR AGAINST THIS APPLIANCE

STORE CHEMICALS OR FLAMMABLE MATERIALS

SPRAY AEROSOLS IN THE VICINITY OF THIS

APPLIANCE WHILE IN OPERATION.

OPERATE WITH PANELS, COVERS OR GUARDS

REMOVED FROM THIS APPLIANCE.

ENCLOSE THIS APPLIANCE.

DO NOT MODIFY THIS APPLIANCE.

NEAR THIS APPLIANCE.

DO NOT

908-602a

(Australia Only)

DATA BADGE NOTE: Regency®units are constantly being improved.

Check the label on the unit and if there is a difference, the label on the

unit is the correct one.

Electrical: 240VAC 50Hz 1.0 amp max.

Serial

Number

918-308c

N2134

Regency Gas Fireplace

266

Gas Type NG LPG ULPG

Model

Gas Consumption 23.7 . 23.5 20.3

Manifold Pressure 0.95

Injector Size 1x 1x#54 1x#55

P33-NG P33-LPG P33-ULPG

mj mj. mj.

kPa kPa kPa

2.61 2.40

2.18mm 1.4mm 1.32mm

Model

AGA Approval number to

Code AS4553-2000 6702 6702 6702

Distributed by:

Western Australia:

To be installed by an authorised person in

accordance with installation instructions

provided with the appliance.

Air Group Australia

28-30 Division St

Welshpool, WA 6106

Fireplace Products

Australia Pty. Ltd.

21-23 South Link Blvd.

Dandenong, VIC 3175

Eastern Australia:

Regency®P33 Gas Log Fireplace 5

INSTALLATION

IMPORTANT MESSAGE

SAVE THESE

INSTRUCTIONS

The P33-NG or P33-LPG Direct Flue Fireplace

must be installed in accordance with these in-

structions. Carefully read all the instructions in

this manual ﬁrst. Consult the "authority having

jurisdiction" to determine the need for a permit

prior to starting the installation. It is the respon-

sibility of the installer to ensure this ﬁreplace

is installed in compliance with manufacturer's

instructions and all applicable codes.

BEFORE YOU START

Safe installation and operation of this appli-

ance requires common sense, however, we

arerequired bythe CanadianSafety Standards

andANSI Standards to make you aware of the

following:

INSTALLATIONANDREPAIRSHOULD

BEDONEBYAQUALIFIED SERVICE

PERSON.THEAPPLIANCESHOULD

BE INSPECTED BEFORE USE

AND AT LEAST ANNUALLY BY A

PROFESSIONALSERVICEPERSON.

MORE FREQUENT CLEANING MAY

BE REQUIRED DUE TO EXCESSIVE

LINT FROM CARPETING, BEDDING

MATERIAL, ETC. IT IS IMPERATIVE

THAT CONTROL COMPARTMENTS,

BURNERS AND CIRCULATING AIR

PASSAGEWAYSOFTHEAPPLIANCE

BE KEPT CLEAN.

CHILDREN AND ADULTS SHOULD

BEALERTED TO THE HAZARDS OF

HIGH SURFACE TEMPERATURES,

ESPECIALLY THE FIREPLACE

GLASS, AND SHOULD STAY AWAY

TO AVOID BURNS OR CLOTHING

IGNITION.

DUETOHIGHTEMPERATURES,THE

APPLIANCE SHOULD BE LOCATED

OUT OF TRAFFIC AND AWAY FROM

FURNITURE AND DRAPERIES.

WARNING: FAILURE TO INSTALL

THISAPPLIANCECORRECTLYWILL

VOID YOUR WARRANTY AND MAY

CAUSE A SERIOUS HOUSE FIRE.

CLOTHINGOROTHERFLAMMABLE

MATERIALSHOULDNOTBEPLACED

ON OR NEAR THE APPLIANCE.

GENERAL SAFETY

INFORMATION

1) Theapplianceinstallationmustconformwith

localcodesor,intheabsenceoflocalcodes,

with the current Canadian or National

Gas Codes, CAN1-B149orANSIZ223.1

Installation Codes.

2) The appliance when installed, must be

electrically grounded in accordance with

localcodes,orintheabsenceoflocalcodes

with the current National Electrical Code,

ANSI/NFPA 70 or CSA C22.1 Canadian

Electrical Code.

3) See general construction and assembly

instructions.The appliance and ﬂueshould

be enclosed.

4) This appliance must be connected to the

speciﬁed ﬂue and termination cap to the

outsideofthebuildingenvelope.Neverﬂue

to another room or inside a building. Make

sure that the ﬂue is ﬁtted as per Flueing

instructions.

5) Inspect the ﬂueing system annually for

blockage and any signs of deterioration.

6) Flueingterminalsshallnotberecessedinto

a wall or siding.

7) Any safety glass removed for servicing

must be replaced prior to operating the

appliance.

8) To prevent injury, do not allow anyone who

is unfamiliar with the operation to use the

ﬁreplace.

9) Wearglovesandsafetyglassesforprotection

while doing required maintenance.

10) Be aware of electrical wiring locations in

walls and ceilings when cutting holes for

termination.

11) Under no circumstances should this

appliance be modiﬁed. Parts that have to

beremovedforservicingshouldbereplaced

prior to operating this appliance.

12) Installationandanyrepairstothisappliance

shouldbedonebyaqualiﬁedserviceperson.

A professional service person should be

called to inspect this appliance annually.

Make it a practice to have all of your gas

appliances checked annually.

13) Do not slam shut or strike the glass door.

14) Undernocircumstancesshouldanysolidfuels

(wood, paper, cardboard, coal, etc.) be used

in this appliance.

15) The appliance area must be kept clear and

free of combustible materials, (gases and

other ﬂammable vapours and liquids).

MANUFACTURED

MOBILE HOME

ADDITIONAL

REQUIREMENTS

1) Ensure that structural members are not cut

or weakened during installation.

2) Ensure proper grounding using the #8

groundlugprovided. See "Wiring Diagram"

section.

Emissions from burning wood or gas could

contain chemicals known to the State of

California to cause cancer, birth defects or

other reproductive harm.

YOUNG CHILDREN SHOULD BE

CAREFULLY SUPERVISED WHEN

THEY ARE IN THE SAME ROOM AS

THE APPLIANCE.

Regency®P33 Gas Log Fireplace

INSTALLATION

CHECKLIST

1) Locate appliance. Refer to the following

sections:

a) Locating Your Fireplace

b) Clearances

c) Combustible Mantels

d) Framing & Finishing

e) Flueing

2) Assemble Top Facing Support and Side

Nailing Strips, "Unit Assembly Prior to

Installatio" section. (NOTE: must be done

before installing unit into ﬁreplace.)

3) Install flue, see details on "Flueing"

sections.

4) Make gas and electrical connections. Test

the pilot. Must be as per diagram. "Pilot

Adjustment" section. Convert to LPG if

desired, "Conversion from NG to LPG"

section.

5) Installstandardandoptionalfeatures.Refer

to the following sections where applicable:

a. Brick Panels

b. Log Set

c. Flush Door

d. Double Screen Door

e. Bay Door

f. Louvers

g. Wall Switch

h. Wall Thermostat

6) Final check.

Before leaving this unit with the customer,

the installer must ensure that the appliance is

ﬁring correctly and operation fully explained

to customer.

This includes:

1) Clockingtheappliancetoensurethecorrect

ﬁringrate (ratenotedon label)after burning

appliance for 15 minutes.

2) Ifrequired,adjustingtheprimaryairtoensure

that the ﬂame does not carbon. First allow

the unit to burn for 15-20 min. to stabilize.

CAUTION:Any alteration to the productthat

causes sooting or carboning that results

in damage is not the responsibility of the

manufacturer.

Diagram 1

INSTALLATION

LOCATING YOUR

FIREPLACE

1) Whenselectingalocationforyourﬁreplace,

ensure that the clearances outlined on this

page are met.

2) Provide adequate clearances for servic-

ing.

3) The appliance must be installed on a ﬂat,

solid,continuoussurface(e.g.wood,metal,

concrete).Thismaybetheﬂoor,orraisedup

on a platform to enhance its visual impact.

If the appliance is going to be installed

on carpeting, combustible linoleum tile or

othercombustible materialother thanwood

ﬂooring,theappliancemustbeinstalledona

metalorwoodpanelextendingthefullwidth

and depth of the appliance.

UNIT DIMENSIONS 4) The P33 can be installed in a recessed

position or framed out into the room as in

A, B, C, D. See Diagram 1.

5) This appliance is Listed for bedroom

installationswhenusedwithaListedMillivolt

Thermostat. Some areas may have further

requirements, check local codes before

installation.

6) The P33 Direct Flue Gas Fireplace is ap-

proved for alcove installations, which meet

the clearances listed on the next page.

7) Werecommendthatyouplanyourinstallation

on paper using exact measurements for

clearances and ﬂoor protection before

actually installing this appliance. Have a

qualiﬁedinspector,dealer,orinstallerreview

your plans before installation.

Note: Forﬂueterminationssee"ExteriorFlue

Termination Locations" section.

A) Flat on Wall

B) Flat on Wall Corner

C) Recessed into Wall/Alcove

D) Corner

HEATWAVE

DUCT SYSTEM

OPTION KIT

#946-556

The HeatWave Air Duct Kit increases the

effectiveness of your ﬁreplace by dispersing

warmairfromtheﬁreplacetoremotelocationsin

the same room or other rooms in your home.

Upto two kits maybeinstalled ontheﬁreplace.

Please Note: Only 1 HeatWave kit may be

operated at one time. This includes the internal

blower option as well.

33"(838mm)

23"(584mm)

12-3/4"(324mm)

29"(737mm)

28-1/2"(724mm)

31-1/2"(800mm)

Regency®P33 Gas Log Fireplace 7

COMBUSTIBLE MANTELS

INSTALLATION

WARNING

Fire hazard is an extreme risk if

these clearances are not ahered to.

Clearances for Bay or Flush Front

Because of the extreme heat this ﬁreplace emits, the mantel clearances are critical.

Combustible mantel clearances from top of unit are shown in the diagram below.

Note: A non-combustible mantel may be installed at a lower height if the framing

is made of metal studs covered with a non-combustible board.

MANTEL LEG CLEARANCES

Combustible mantel leg clearances as per diagram below:

This drawing is to scale at 1:6 (one inch = 6 inches). Mantel can be installed anywhere in shaded

area or higher using the above scale.

Note: Ensure the paint that is used on the mantel and the facing is "heat resistant" or the

paint may discolour.

CLEARANCES

TheclearanceslistedbelowareMinimumdistances

unless otherwise stated:

Amajorcauseofchimneyrelated ﬁresisfailure

to maintain required clearances (air space)

to combustible materials. It is of the greatest

importance that this ﬁreplace and ﬂue system

be installed only in accordance with these

instructions.

Clearance to Combustibles from:

Back 0" (0mm)

Side 0" (0mm)

Floor 0" (0mm)

NOTE:Theminimumﬂoorclearancemustbemain-

tainedfromthetopsurfaceofthecarpeting,tile,etc.

Minimum Clearance from Top of Unit to:

Mantel* min. 7" (177mm)

Ceiling 30" from top of unit (762mm)

Side Wall Clearance

Bay or Flush Front 7-1/2" (191mm)

Minimum Flue Clearances:

2-1/2" (64mm) Horizontal Top

1-1/2" (38mm) Horizontal Side

1-1/2" (38mm) Horizontal Bottom

1-1/4" (32mm) Vertical Flue Clearance (Simpson)

1-1/2" (38mm) Vertical Flue Clearance (Flex)

Alcove Clearances:

Max. Depth 36" (914mm)

Min. Width 48" (1219mm)

Min. Height 59" (1499mm)

* see mantel clearance instructions.

Maximum

1-1/2" (38mm) projection

at 2" (51mm) minimum

clearance.

The HeatWave Duct Kit has different

clearance and framing requirements,

check the HeatWave manual for details.

Regency®P33 Gas Log Fireplace

INSTALLATION

InstallSideNailingStrips,andTopFacing

Supportbeforeunitisslippedintoposition.

See page 9 for assembly details.

3) For exterior walls, insulate the enclosure to

the same degree as the rest of the house,

apply vapour barrier and drywall, as per

local installation codes. (Do not insulate

the ﬁreplace itself.)

4) The top of the unit must not be closer than

30" (762mm) to the ceiling.

5) Combustible material may be brought up to

the top and sides of the unit and be covered

with ceramic tiles, bricks, rock or other

suitable combustible ﬁnishing materials.

Note: Theunitdoesnothavetobecompletely

enclosedinachase.Theclearanceon

topoftheunitis0"tothestandoffsso

combustiblebuildingmaterialscanbe

laid directly on top of the standoffs.

Youmustmaintainclearancefromthe

ﬂue to combustible materials for ﬂex

for Simpson Dura-Vent, see page 7.

6) Usesteelstudsfor framing where the 1-1/2"

(38mm)clearancefromtheﬂuetocombustible

material cannot be maintained.

1) Determine the total thickness of facing

material (e.g. drywall plus ceramic tiles) to

allow the ﬁnished surface to be ﬂush with

the front of the unit. Total facing thickness

canvaryfrom1/2"(13mm)to1-1/4"(32mm)

thick.

2) Frame in the enclosure for the unit with

framing material.

FRAMING AND FINISHING

TheHeatWaveDuctKithasdifferentclear-

anceandframingrequirements,checkthe

HeatWave manual for details.

16-1/2”

(419mm)

Minimum

(102mm)

(76mm)

1-1/2"

(38mm)

30”

(762mm)

10" (254mm)

dia. Hole through

wall for Dura-Vent

1/2"

(13mm)

Drywall

Top Header

Opening for gas

connection

12-3/4”

(324mm)

Minimum

(102mm)

(76mm)

1-1/2"

(38mm)

26”

(660mm)

10" (254mm)

dia. Hole through

wall for Flex

1/2"

(13mm)

Drywall

Top Header

Opening for gas

connection

Simpson Dura-Vent

Minimum Clearances

Flex Pipe

Minimum Clearances

Vertical Termination or

Vertical Rise with Horizontal

Termination

NOTE: If this is an outside corner, the

minimumdistancebetweentheﬂueandthe

outside corner is 6" (15cm) with AstroCap

terminationcapor12"(30cm)withDura-Vent

termination cap.

For Both Simpson & Flex

Rear Termination

NOTE: If this is an outside corner, the

minimum distance between the ﬂue and the

outside corner is 6" (15cm) with AstroCap

termination cap or 12" (30cm) with Dura-Vent

termination cap.

Simpson Dura-Vent Piping

Flex Piping

For Both Simpson & Flex

Regency®P33 Gas Log Fireplace 9

For a facing material depth of

1-1/4"(32mm), the top facing

support must be reversed.

TheTopFacingSupport,theSide NailingStrips

and the 2 Top Standoffs must be correctly po-

sitioned and attached to the top before the unit

is put into position.

Top Standoff Assembly

The top standoffs are shipped in a ﬂat position

and must be pulled up and bent into the cor-

rect shape.

1) Remove the standoffs from on top of the

ﬁrebox by undoing the screws.

2) Take each standoff and bend into the cor-

rect shape. Bend up at the bend lines until

the screw holes in the standoff and the

pre-punchedscrewholesontheﬁreboxtop

line-up.

3) Attachthe standoffssecurelyto thetopwith

4 screws per standoff.

Note: Secure the standoffs to the holes

closest to the edge of the ﬁrebox top.

Top Facing Support &

Side Nailing Strips

Determine the total thickness of facing mate-

rial (e.g. drywall plus ceramic tiles) to allow the

ﬁnished surface to be ﬂush with the front of the

unit. Total facing thickness can vary from 1/2"

(13mm) to 1-1/4" (32mm) thick.

The Top Facing Support & Side Nailing Strips

canbe mountedinvariouspositionsdepending

on the thickness of the facing material.

1) Mount Top Facing Support using the 3

suppliedscrews intothethree pre-punched

screwholesonthetopfrontoftheunit.Adjust

support to desired facing material depth.

2) Mount Side Nailing Strip using the 3 sup-

plied screws into the three pre-punched

screw holes at the front sides of the unit.

Adjust support to desired facing material

thickness.

UNIT ASSEMBLY

PRIOR TO INSTALLATION

INSTALLATION

FLUEING INTRODUCTION

The P33 uses the "balanced ﬂue" technology Co Axial system. The inner liner ﬂues products of combustion to the outside while the outer liner

draws outside combustion air into the combustion chamber thereby eliminating the need to use heated room air for combustion and losing warm

room air up the chimney.

There are 2 ﬂue systems approved for use with the P33: the Regency®Direct Flue System (Flex) for Horizontal Terminations only, and the Simpson

Dura-Vent Systems for Horizontal and Vertical Terminations.

Note: These ﬂue pipes must not be connected to any other appliance.

The gas appliance and ﬂue system must be ﬂueed directly to the outside of the building, and never be attached to a chimney serving a separate

solid fuel or gas burning appliance. Each direct ﬂue gas appliance must use it's own separate ﬂue system. Common ﬂue systems are prohibited.

NOTE: Ensure compliance with the outside ﬂue terminal location before cutting hole as both dimensions must be met.

Regency®P33 Gas Log Fireplace

INSTALLATION

EXTERIOR FLUE TERMINATION LOCATIONS

Minimum clearances required for balanced ﬂue terminals or

the ﬂue terminals of outdoor appliances

according to AS5601-2004 (AGA gas installation code) or NZS 5261 (New Zealand)

Minimum Clearance (mm)

a Below eaves, balconies or other projections:

- Appliances up to 50 MJ/h input 300

- Appliances over 50 MJ/h input 500

b From the ground or above a balcony 300

c From a return wall or external corner 500

d From a gas meter (M) 1000

e From an electricity meter or fuse box (P) 500

f From a drain or soil pipe 150

g Horizontal from any building structure (unless appliance is approved

for closer installation) or obstruction facing a terminal 500

h From any other ﬂue terminal, cowl or combustion air intake 500

j Horizontally from an openable window, door, or non-mechanical air inlet, or

any other opening into a building, with the exception of sub-ﬂoor ventilation

(see also Note (I)):

- Appliances up to 150 MJ/h input 500

- Appliances over 150 MJ/h input 1500

k Vertically below an openable window, door, or non-mechanical air inlet,

or any other opening into a building, with the exception of sub-ﬂoor ventilation

(see also Note (I)): see table below

NOTES:

(I) For mechanical air inlets, including spa blowers, the clearance 'j' and 'k' shall be 1500 mm in all cases.

(II) All distances shall be measured vertically or horizontally along the wall to a point in line with the nearest par to of the terminal.

(III)Prohibited area below electricity meter or fuse box extends to ground level.

(IV)A ﬂue terminal of this type shall not be located under a roofed area unless the roofed area is fully open on at least two sides and a free ﬂow

of air at the appliance is achieved.

Clearance 'k' in mm

Space Heaters All Other Appliances

Up to 50 MJ/h Up to 50 MJ/h input Over 50 MJ/h input Over 150 MJ/h input

input to 150 MJ/h input

150 500 1000 1500

This manual suits for next models

Table of contents

Other Regency Indoor Fireplace manuals

Regency

Regency CC40LE-NG Quick start guide

Regency

Regency Contura RC500EX Quick start guide

Regency

Regency I35-NG Quick start guide

Regency

Regency Horizon HZ54E-NG Quick start guide

Regency

Regency GFI300LNG-R User manual

Regency

Regency Classic I2405M Quick start guide

Regency

Regency Liberty Gas Fireplace L676-NG1 Quick start guide

Regency

Regency CV72EPV-NG Quick start guide

Regency

Regency classic fp90 Quick start guide

Regency

Regency L850B Quick start guide

Regency

Regency B36XT-NG User manual

Regency

Regency L390E User manual

Regency

Regency Grandview G800EC Series Quick start guide

Regency

Regency HZ33CE-LP10 User manual

Regency

Regency Greenfire GF1500L NG-2 User manual

Regency

Regency CV40E-12 Quick start guide

Regency

Regency ACC40LENG Quick start guide

Regency

Regency P48-NG1 Quick start guide

Regency

Regency G51-NG UltraGlow Quick start guide

Regency

Regency Horizon HZ42STE-NG Quick start guide

Regency

Regency Vancouver F2402M Quick start guide

Regency

Regency I2403M Quick start guide

Regency

Regency P33-NG4 Quick start guide

Regency

Regency P33S-NG Quick start guide

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual