RDL EZ-HRA3 User manual

INSTALLATION

MANUAL

RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.

For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the

inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability

performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.

RDL•659 6th Street •Prescott, AZ •USA 86301 •Sales: 800-281-2683 •928-443-9391

Tech Support: 800-933-1780 •928-778-3554 •RDL Europe Sales & Support: (31) 20-6238-983

www.rdlnet.com

Decades of Performance, Quality and Value

EZ-HRA3

10.4" Rack Adapter for 3 Increments of 1/6 Rack Width

www.rdlnet.com • ••www.rdlez.com

EZ-HRA3 with Base Plate Installed

EZ-HRA3 with Base Plate Forward

With the base plate screws removed from the

rear of the EZ-HRA3tray, the base plate slides

forward to facilitate installation of EZ products.

EZ product mounting screw holesEZ drawer mounting slots

Mounts All EZ A/V Products

Mounts EZ Storage Drawers

Base Plate Slides Out for Easy Product Mounting

Occupies One RU in 10.4¨ Rack

EZ-HRA3

Rack Adapter

EZ-RA6 BASE PLATE ASSEMBLY

•

STEP 1

Remove EZ-HRA3 base plate screws

and slide the base plate forward.

STEP 3

Slide base plate back into the

EZ-HRA3 rack mount tray and secure

the base plate using the three screws.

STEP 2

Mount EZ products, filler panels and

drawers to the base plate.

Base plate

screw holes

Base plate screws

Product mounting screws

DRAWER DETAIL: Insert the glide tabs into

the base plate slot(s).

FILLER PANEL DETAIL: Mount an EZ-FP1 Filler Panel to the base plate.

EZ PRODUCT DETAIL: Mount an EZ product to the base plate.

EZ-HRA3 base plate bottom view

PRODUCT INSTALLATION IN EZ-HRA3

EZ-HRA3 base plate

EZ-HRA3 tray

Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.

EZ-CC6

EZ-DC2

EZ-DC1

EZ-FP1

EZ-SMB1 EZ-SMB2

OTHER SELECTED EZ SERIES MOUNTING ACCESSORIES

Component Chassis for 6 Increments of 1/6 Rack Width

Desktop Chassis 1/3 Rack Width

Desktop Chassis 1/6 Rack Width

Filler Panel 1/6 Rack Width