RCF COMPACT M Series User manual
OWNER MANUAL
MANUALE UTENTE
COMPACT M SERIES
M04
M05
M06
M08
M10
M12
TWO-WAY SPEAKERS
2
ENGLISH
ITALIANO
LANGUAGE
3
13
3
ENGLISH
SAFETY PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with special attention, as
they provide important information.
2. POWER SUPPLY FROM MAINS
a. The mains voltage is sufficiently high to involve a risk of electrocution; install and con-
nect this product before plugging it in.
b. Before powering up, make sure that all the connections have been made correctly and
the voltage of your mains corresponds to the voltage shown on the rating plate on the
unit, if not, please contact your RCF dealer.
c. The metallic parts of the unit are earthed through the power cable.An apparatus with
CLASS I construction shall be connected to a mains socket outlet with a protective
earthing connection.
d. Protect the power cable from damage; make sure it is positioned in a way that it can-
not be stepped on or crushed by objects.
e. To prevent the risk of electric shock, never open this product: there are no parts inside
that the user needs to access.
3. Make sure that no objects or liquids can get into this product, as this may cause a short
circuit. This apparatus shall not be exposed to dripping or splashing. No objects filled with
liquid, such as vases, shall be placed on this apparatus. No naked sources (such as lighted
candles) should be placed on this apparatus.
4. Never attempt to carry out any operations, modifications or repairs that are not expressly
described in this manual.
Contact your authorized service centre or qualified personnel should any of the following
occur:
-The product does not function (or functions in an anomalous way).
-The power cable has been damaged.
-Objects or liquids have got in the unit.
-The product has been subject to a heavy impact.
5. If this product is not used for a long period, disconnect the power cable.
6. If this product begins emitting any strange odours or smoke, switch it off immediately
and disconnect the power cable.
7. Do not connect this product to any equipment or accessories not foreseen.
For suspended installation, only use the dedicated anchoring points and do not try to hang
this product by using elements that are unsuitable or not specific for this purpose. Also
check the suitability of the support surface to which the product is anchored (wall, ceiling,
structure, etc.), and the components used for attachment (screw anchors, screws, brackets
not supplied by RCF etc.), which must guarantee the security of the system / installation
over time, also considering, for example, the mechanical vibrations normally generated by
transducers.
To prevent the risk of falling equipment, do not stack multiple units of this product unless
this possibility is specified in the user manual.
8. RCF S.p.A. strongly recommends this product is only installed by profession-
al qualified installers (or specialised firms) who can ensure correct installation
and certify it according to the regulations in force.
The entire audio system must comply with the current standards and regula-
tions regarding electrical systems.
9. Supports and trolleys
The equipment should be only used on trolleys or supports, where necessary, that are rec-
ommended by the manufacturer.The equipment / support / trolley assembly must be moved
with extreme caution. Sudden stops, excessive pushing force and uneven floors may cause
the assembly to overturn.
SAFETY
PRECAUTIONS
IMPORTANT
4
ENGLISH
10. There are numerous mechanical and electrical factors to be considered when installing
a professional audio system (in addition to those which are strictly acoustic, such as sound
pressure, angles of coverage, frequency response, etc.).
11. Hearing loss
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure
level that leads to hearing loss is different from person to person and depends on the dura-
tion of exposure. To prevent potentially dangerous exposure to high levels of acoustic pres-
sure, anyone who is exposed to these levels should use adequate protection devices.When
a transducer capable of producing high sound levels is being used, it is therefore necessary
to wear ear plugs or protective earphones. See the manual technical specifications to know
the maximum sound pressure level.
IMPORTANT NOTES
To prevent the occurrence of noise on line signal cables, use screened cables only and avoid
putting them close to:
-Equipment that produces high-intensity electromagnetic fields.
-Power cables.
-Loudspeaker lines.
OPERATING PRECAUTIONS
-Place this product far from any heat sources and always ensure an adequate
air circulation around it.
-Do not overload this product for a long time.
-Never force the control elements (keys, knobs, etc. ).
-Do not use solvents, alcohol, benzene or other volatile substances for clean-
ing the external parts of this product.
IMPORTANT NOTES
Before connecting and using this product, please read this instruction manual carefully and
keep it on hand for future reference. The manual is to be considered an integral part of
this product and must accompany it when it changes ownership as a reference for correct
installation and use as well as for the safety precautions. RCF S.p.A. will not assume any
responsibility for the incorrect installation and / or use of this product.
WARNING: To prevent the risk of fire or electric shock, never expose this product to rain
or humidity.
IMPORTANT NOTES
IMPORTANT NOTES
WARNING
OPERATING
PRECAUTIONS
5
ENGLISH
RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH HAS BEEN
DESIGNED TO GUARANTEE RELIABILITY AND HIGH PERFORMANCE.
DESCRIPTION
The Compact Media series ncludes a wide range of high quality 2-way passive
loudspeakers for fixed installations and is the ideal solution for small to medium size
projects.
This series covers 6 models:
- COMPACT M 04 two-way loudspeaker, 4” woofer and 1” dome tweeter;
- COMPACT M 05 two-way loudspeaker, 5” woofer and 1” dome tweeter;
- COMPACT M 06 two-way loudspeaker, 6” woofer and 1” dome tweeter;
- COMPACT M 08 two-way loudspeaker, 8” woofer and 1.4” compression driver;
- COMPACT M 10 two-way loudspeaker, 10” woofer and 1.4” compression driver;
- COMPACT M 12 two-way loudspeaker, 12” woofer and 1.4” compression driver;
Models from M 06 to M 12 are equipped with a high power handling ‘Low Impedance
Compensated Crossover’, having an electronic protection for the driver.
The front grilles are made of steel and the front RCF logo is easily rotatable.
Several rigging points are available on each model, in order to match with any application
needs.
All models have a 4-pin EUROBLOCK connector (audio input and parallel link output).
6
ENGLISH
Loudspeakers are to be install by qualified personnel, respecting all safety standards.
Loudspeakers are to be installed securely.
Make sure the support structure (walls / ceilings) has the necessary mechanical
characteristics for the loudspeaker weight, without the risk of a fall that could damage
things or cause an injury.
Use attachments elements suitable for walls / ceilings (e.g. wall plugs for bricks, for
concrete, etc.).
a) HORIZONTAL MOUNTING WITH U BRACKET
Necessary optional accessory:
-
HORIZONTAL BRACKET H-BR 2X COMPACT M 08 (for COMPACT M 08 model);
- HORIZONTAL BRACKET H-BR 2X COMPACT M 10 (for COMPACT M 10 model);
- HORIZONTAL BRACKET H-BR 2X COMPACT M 12 (for COMPACT M 12 model);
1. Fix the U bracket to the wall / ceiling through at least 4 lateral wall plugs (max. M8)
plus a central one (max. M10).
2. Mount the U bracket to the loudspeaker by tightening the two M10x35 bolts into the
holes of the loudspeaker top and bottom, as shown in the figure below.
Alternatively, it’s possible to install the speaker in a less protruding way by using the other
two inner holes on the U bracket.
Before tightening the two M10 bolts, adjust the loudspeaker vertical tilt and then (when
you found the right angle) fix it through two M4.2x22 self-threading screws (passing
through the small hole of the U bracket) directly into the loudspeaker cabinet wood.
NOTE: DO NOT TILT THE LOUDSPEAKER UPWARDS!
INSTEAD OF SIMPLE M10 BOLTS, IT IS POSSIBLE TO USE THE M10 BOLT INCLUDED
KNOBS.
INSTALLATION
7
ENGLISH
1. After removing the screwes on the speaker sides, fix the angular adaptor on the
speaker with the M8x45 screws.
2. Place the plastic cover on the angular adaptor.
3. Fix the braket to the speaker with the M10x30 screws placing a grower washer
between the bracket and the plastic cover.
Alternatively, a less protruding installation is possibile thanks to the inner holes of the U
bracket.
Set the speaker vertical tilt and fix the inclination by screwing the two M6 screws on the
adaptor.
NOTE: DO NOT TILT THE LOUDSPEAKER UPWARDS!
b) VERTICAL MOUNTING WITH U BRACKET
Necessary optional accessory:
-
VERTICAL BRACKET V-BR 2X COMPACT M 08 (for COMPACT M 08 model);
- VERTICAL BRACKET V-BR 2X COMPACT M 10 (for COMPACT M 10 model);
- VERTICAL BRACKET V-BR 2X COMPACT M 12 (for COMPACT M 12 model);
Fix the U bracket to the wall / ceiling through at least 4 lateral wall plugs (max. M8) plus
a central one (max. M10)..
Model COMPACT M 04 comes with its own
HORIZONTAL BRACKET wich must be fixed in
the same way as the other COMPACT M models (see picture below).
ANGULAR
ADAPTOR
M8x45
GROWER WASHER
PLASTIC COVER
M10x30
M4x16
8
ENGLISH
The MOVING PART of the accessory must be fixed directly on the back of the speaker
with 4 M6 flat head screws (already placed on the speaker). On the COMPACT M 08
model the accessory can be fixed in two different positions (as shown in the picture
below).
It is also possible the loudspeaker horizontal mounting (see the figure below).
3. Then, place the speakers on the support braket and tighten the two lateral bolts.
c) MOUNTING WITH A SWIVEL BRACKET
Necessary optional accessory: WALL MOUNT BRACKET SWM-BR COMPACT M
(
for COMPACT M 05, M 06 and M 08 models)
1. Install the fixed part of the accessory with 4 M8 wall plugs through the 4 holes (the
central area of the fixed part can be useful to let pass the connecting cable from the wall
outlet).
2. Fix the SUPPORT BRACKET to the FIXED PART with two M10 bolt included in
dotazione and choose the right inclination angle (0°, 15°, 30°, 45°).
MOVING PART
FIXED PART
SUPPORT
BRACKET
9
ENGLISH
WARNING: loudspeaker connections should be only made by qualified and experienced
personnel having the technical know-how or sufficient specific instructions (to ensure
that connections are made correctly) in order to prevent any electrical danger.
To prevent any risk of electric shock, do not connect loudspeakers when the amplifier is
switched on. Before turning the system on, check all connections and make sure there are
no accidental short circuits.
The entire sound system shall be designed and installed in compliance with the current
local laws and regulations regarding electrical systems.
‘COMPACT M’ series loudspeakers are designed for indoor use only. If installed outdoor,
loudspeakers shall be protected against water.
The impedance value of each loudspeaker is 8 Ω.
Connect the positive wire (amplifier ‘+’ output) to the pin ‘INPUT +’ of the 4-pin
EUROBLOCK connector. Connect the negative wire (amplifier ‘–’ output) to the pin
‘INPUT –’ of the 4-pin EUROBLOCK connector.
The ‘LINK +’ and ‘LINK –’ pins are useful to link another loudspeaker in parallel.
CONNECTIONS
10
ENGLISH
NOTES ABOUT LOW IMPEDANCE CONNECTIONS
- +
TOTAL IMPEDANCE: 4 Ω
8 Ω
8 Ω
+
+
- +
TOTAL IMPEDANCE: 8 Ω
8 Ω
+
-The total loudspeaker impedance must not be lower than the amplifier output
impedance. Note: a loudspeaker total impedance equal to the amplifier output one
permits to get the maximum deliverable power (but an higher loudspeaker impedance
entails less power).
-The total loudspeaker power shall be adequate for the maximum deliverable power of
the amplifier.
-The loudspeaker line shall be short (for long distances, it may be necessary to use cables
with large cross-section wires).
-Always use cables having wires with an adequate cross-section, considering the cable
length and the total loudspeaker power.
-Loudspeaker lines must be kept separated from the mains cables, microphone cables or
others, in order to avoid inductive phenomena may cause hum or noises.
-Use loudspeaker cables with twisted wires to reduce hum caused by inductive effects
due to coupling with electromagnetic fields.
-Do NOT connect the low impedance input directly to 70 / 100 V constant voltage lines.
Other manuals for COMPACT M Series
1
This manual suits for next models
5
Table of contents
Languages:
Other RCF Speakers manuals
