Q-See QV View User manual
Q-See QV View
User manual
Connect the device
Connect the power adapter to the camera, then
using network cable connect camera with WiFi router.
Check the network power indicator (yellow) and network
indicator (Orange).
Attention: Please use provided power plug to avoid damage.
Note: press the button on the bottom of the camera for 10 seconds can
reset back to factory setting.
Install Android/IOS APP
Search “QV View” in Google Play / App Store to
download APP in your mobile phone.
Get an Q-See QV View account
Register an QV View account
1. Open Android/iOS APP, click register.
2. Enter the user name, password to complete registration.
Note: The password only can contain numbers, letters,
underlined, and the length must be between 6-16
character.
Add camera
Click “+”, enter into camera add
interface. input camera ID
① Search: find the IP cameras in
the same WiFi network as the mobile phone.
② Scan UID code: point the phone camera to the UID
code, after a “beep” sound, scan success.
③ Input the camera password: (default password:
888888)
④ Click Finish button, camera add success.
Delete camera
Click More in camera setup, choose the camera list , then
delete.
View Video
Wait for a few seconds after camera added.
Camera status explanation
Connecting
Camera is connecting, due to the network
condition, connecting time requires
differently.
timeout connection timeout
offline
camera is offline, please check the
device connection.
Unknown
No data received, please refresh the
status.
Invalid ID
Incorrect UID, please input again.
online
Device is connected, click to view the
video.
Video interface description
left/right cruise
UP/down cruise
Picture setting. Set image contrast, brightness, and
others.
Preset
Listen off Listen
Talk off Talk
Snapshot, can browse picture in [ video picture]
Recording, videos can be viewed in [ video picture]
Screen Rotation
Camera setup
More---Camera setup----choose the camera
Connect camera wirelessly
More>camera setup> WiFi setup, the system will auto
search the available WiFi signal, then choose the correct
WiFi, then input your WiFi password, connection.
Unplug the network cable during the camera restart
process.
Table of contents
Other Q-See Security Camera manuals
Q-See
Q-See QPD308 User manual
Q-See
Q-See SDI Cameras User manual
Q-See
Q-See QSZ515D User manual
Q-See
Q-See QCW3MP16 User manual
Q-See
Q-See QCN8009D User manual
Q-See
Q-See QCW2MP User manual
Q-See
Q-See QSWLOC User manual
Q-See
Q-See QCN8068BA User manual
Q-See
Q-See QST3100 User manual
Q-See
Q-See QSZ515D User manual
Q-See
Q-See QTH7212P User manual
Q-See
Q-See QSDS1312D User manual
Q-See
Q-See RV 060109 User manual
Q-See
Q-See QSDS14273 User manual
Q-See
Q-See QC-SERIES User manual
Q-See
Q-See QSM1424W User manual
Q-See
Q-See QSDNV User manual
Q-See
Q-See QS4088035 User manual
Q-See
Q-See QSDS4936D User manual
Q-See
Q-See QSOCWC User manual
