Purivortex Vortex V3 User manual
Before using this product, please
READ AND SAVE THE INSTRUCTION
User Manual
HEPA Air Purifier
Model: Vortex V3
1. Warranty
01
This product should be used only in accordance with the
specifications outlined in this User Guide. Usage other than
what has been specified here may result in serious injury.
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
Read all instructions before using the appliance.
Keep the cord out of heavy traffic areas. To avoid fire hazard,
NEVER put the cord under rugs, near heat registers, radiator,
stoves, or heaters.
To protect against electrical hazards, DO NOT immerse in water
or other liquids. Do not use this device near water.
Children cannot recognize the hazards associated with the usage
of electrical appliances. For this reason, always supervise children
when they are near the unit.
Always unplug the air purifier before moving it, opening the
grille, changing filters, cleaning or whenever the air purifier
is not in use. Be sure to pull by the plug, not the cord.
NEVER drop or insert any objects into any openings.
DO NOT run the cord under carpeting.
DO NOT cover the cord with throw rugs or similar coverings.
DO NOT route the cord under furniture or appliances. Arrange
the cord away from traffic area and where it will not be tripped
over.
DO NOT operate any appliance with a damaged cord or plug,
if the motor fan fails to rotate, after the appliance malfunctions,
or if it has been dropped or damaged in any manner. Send to
Customer Service for assistance.
Use appliance only for intended household purposes as described
in this manual. Any other use is not recommended that may cause
fire, electric shock, or injury to persons.
DO NOT use outdoors.
DO NOT place anything on top of the unit.
NEVER block the air openings, grille/outlets or place the unit on a
soft surface such as a bed or sofa, as this could cause the unit to
tip over, blocking the air inlet or outlet.
DO NOT attempt to repair or adjust any electrical or mechanical
functions on this unit. Doing so will void your warranty. The inside
of the unit contains no user serviceable parts. All servicing should
be performed by qualified personnel only.
WARNING: To reduce the risk of fire or electric shock, do not use
this purifier with any solid-state speed control device.
3. Note:
4. Introduction:
02
2. Before Operating the Air Purifier
1. Carefully remove your air purifier from the packaging
box and plastic bag.
2. Place it on a firm, level and flat area.
Make sure none of the grilles are blocked.
Do NOT stick any external objects or your fingers inside
of the unit.
Do NOT use gasoline, benzene, and other abrasive or harsh
cleaners, etc. on and/or in the unit while cleaning as they will
damage the product.
NEVER use alcohol or other solvents.
The air purifier works the best in a closed environment. Its
performance may be compromised in a well-ventilated room.
Put the air purifier under the sun for an hour before using it
again if the purifier has not been used for a long time.
Thanks for purchasing our Vortex V3 air purifier. This User
Manual is meant to provide you with a brief walkthrough of
the device’s features and usage protocols. We hope you find
this manual helpful. For additional information and technical
support. Please feel free to contact us.
Table of ContentsTable of Contents
03
2. Specifications
1. Package Contents
1. Package Contents
2. Specifications
3. Get to Know Your Air Purifier
4. Controls
5. Decomposition Diagram of Filter Element
6. How to Operate the Machine
7. Cleaning and Replacing Filters
8. Common Faults and Troubleshooting
1 x HEPA Air Purifier
1 x HEPA 4-Stage Filter (Pre-Installed)
1 x User Manual
1 x Pre-Filter Fabric
Model
Power Supply
Rated Power
Noise Level
Dimensions
Net Weight
Vortex V3
55 W
100-120 V, 60 Hz
≤55 dB (A)
20.07 x 12.99 x 6.69 in
9.14 lbs.
04
2
1
3
6
Product Structure
4
1. Touch Panel
2. Air Outlet
3. Carrying Handle
4. Sensor
5. Pre-Filter Fabric
6. Housing
7. Power Cord
8. Air Inlet
8
5
7
05
4. CONTROLS
Air Quality Indication
Green
Blue
Yellow
Red
Very Good
Good
Moderate
Bad
Speed
Timer
Sleep Mode
Power ON/OFF
Replace Filter Indicator
Child Lock
3. Get to Know Your Air Purifier
a. Press button to select speed from the following options: 2, 3, 1, Auto.
b. Auto Mode adjusts to the appropriate fan speed according to indoor
air quality feedback.
a. You can set a timer for 1-12 hours.
b. You can set a timer to turn the air purifier on/off.
a. Sleep mode operates quietly by using the lowest fan speed.
b. All lights will turn off and only SLEEP button will appear with partial lighting.
Press button once. POWER indicator will turn on. After 30 seconds, the unit
will turn onto Speed 2.
a. The filter indicator will light up as reminder to replace the filter. Depending
on how often you use the air purifier, the indicator should turn on within
3-6 months.
b. Press and hold time button and Power ON/OFF button for 3 seconds to
reset the filter replacement indicator.
a. Press and hold child lock button for 3 seconds. All functional buttons will
be locked.
b. Press and hold again child lock button for 3 seconds. All functional
buttons will be un-locked.
06
HEPA Filter
Purification Process of Filter Mesh
5. Filter Core Decomposition Graph
Improve your indoor air quality with our new air cleaning system. Multiple levels of cleaning include a combination of pre-filter
that traps big particles.
1. The pre-filter filters out abrasive substances as a defence for the HEPA
2. HEPA filter eliminates 99.5% of pollutants as small as 0.3 µm or larger pollen and dust mites and filters air pollution of PM 2.5.
3. Heavy-duty activated carbon filters reduce unwanted odors in your living
07
1
5 6 7
234
6. How to Operate the Machine
Unpack the air purifier Take away the grilles from
the purifier
Remove the filter from its
plastic packaging
Place the filter back into the
purifier
Reattach the grilles to
the purifier
Plug the power cord into a
standard AC outlet Press Power ON/OFF button
08
(Figure 3)
(Figure 1) (Figure 2)
How to Replace the Filter Wash Pre-Filter Fabric
1. Unplug the air purifier. (Figure 1)
2. Take away the grilles from the purifier and pull the tabs to
remove the old filter.
Take away the grilles from the purifier and pull the tabs to
remove the old filter. (Figure 2)
3. Remove the new filter from its plastic packaging and install
a new filter with the white side facing out (tabs will be visible).
4. Press and hold time button and Power ON/OFF button for
3 seconds to reset the replace filter indicator.
5. Reattach the grilles to the purifier and plug the power cord
into a standard AC outlet.
When the filter indicator light
turns red, it needs to replace
the filter.
1. Take away the grilles to take the pre-filter fabric away.
2. Wash the pre-filter fabric with cold water and dry in
the air.
3. Reattach pre-filter fabric to the grilles. The position
of the mesh maintenance label needs to be kept in
the middle above the front cover. (Figure 1)
4. Reattach the grilles to the purifier. (Figure 2)
09
7. Cleaning and Replacing Filters
Product daily cleaning and maintenance.
a. Make sure that the power cord is disconnected while the appliance is cleaned and maintained.
b. Wipe the appearance with a soft cloth that is moderately moist and clean, and then dry with a dry cloth.
Please do not wet the machine directly with water. Keep the machine dry during cleaning to avoid electricity source failure.
c. The filter must be replaced at least every 4 to 6 months.
b. Use a brush to clean the air inlet of the machine.
If not in use for a long time, store the machine in a dry and ventilated place.
※ If your problem is not listed, please contact Customer Support.
NOTE：This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Table of contents
Other Purivortex Air Cleaner manuals
