Psion Teklogix WA4204-G2 User manual
WA4204-G2/WA4304-G2
WORKABOUT PRO
Multi-Dock
User Manual
September, 2007 PN 400092.A
© COPYRIGHT 2007 BY PSION TEKLOGIX INC., MISSISSAUGA, ONTARIO
This document and the information it contains is the property of
Psion Teklogix Inc., is issued in strict condence, and is not to
be reproduced or copied, in whole or in part, except for the sole
purpose of promoting the sale of Psion Teklogix manufactured
goods and services. Furthermore, this document is not to be used
as a basis for design, manufacture, or sub-contract, or in any
manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix provides a return to factory warranty on this
product for a period of twelve (12) months in accordance with
the statement of Warranty and Product Support provided at:
www.psionteklogix.com/warranty.
The warranty on Psion Teklogix manufactured equipment does
not extend to any product that has been tampered with, altered,
or repaired by any person other than an employee of an autho-
rized Psion Teklogix service organization. See Psion Teklogix
terms and conditions of sale for full details.
Important: Psion Teklogix warranties take effect on the date of
shipment.
Service
Psion Teklogix provides a complete range of product support
services to its customers.
For detailed information, please refer to See 6.0: Support
Services And Worldwide Ofces. This section also provides
information about accessing support services through the Psion
Teklogix web site.
Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
This Product, and its accessories, comply with the requirements
of the Waste Electrical and Electronic Equipment (WEEE)
Directive 2002/96/EC.
If your end-of-life Psion Teklogix product or accessory carries a
label as shown here, please contact your local country repre-
sentative for details on how to arrange recycling. For a list of
international subsidiaries, please go to:
http://www.psionteklogix.com/EnvironmentalCompliance
List of Approvals
North America
EMC: FCC part 15, subpart B; class B
Europe
EMC and Low Voltage Directives
This equipment complies with the essential requirements of
EMC Directive 2004/108/EC and Low Voltage Directive
72/23/EEC Declaration of Conformity available on
www.psionteklogix.com/DoC
CE Mark
When used in a residential, commercial or light industrial
environment the product and its approved UK and European
peripherals fulll all requirements for CE marking.
E mark: vehicle directive 95/54/EEC
Most of the world countries - safety approvals covered by CB
report based on EN60950-1.
Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC
What is RoHS?
The European Union has mandated that high environmental
standards be met in the design and manufacture of electronic
and electrical products sold in Europe, to reduce hazardous
substances from entering the environment.
The “Restriction on Hazardous Substances Directive (RoHS)”
prescribes the maximum trace levels of lead, cadmium, mercury,
hexavalent chromium, and ame retardants PBB and PBDE that
may be contained in a product. Only products meeting these
high environmental standards may be “placed on the market” in
EU member states after July 1, 2006.
RoHS Logo
Although there is no legal requirement to mark the
RoHS-compliant products, Psion Teklogix Inc. indicates its
compliance with the directive as follows:
The RoHS logo located either on the back of the product or un-
derneath the battery in the battery compartment (or on a related
accessory such as the charger or docking station) signies that
the product is RoHS-compliant as per the EU directive. Other
than as noted below, a Psion Teklogix product that does not
have an accompanying RoHS logo signies that it was placed
on the EU market prior to July 1, 2006, and is thereby exempt
from the directive.
Note: Not all accessories or peripherals will have a RoHS logo
due to physical space limitations or as a result of their
exempt status.
Disclaimer
Every effort has been made to make this material complete,
accurate, and up-to-date. In addition, changes are periodically
added to the information herein; these changes will be incorpo-
rated into new editions of the publication.
Psion Teklogix Inc. reserves the right to make improvements
and/or changes in the product(s) and/or the program(s) described
in this document without notice, and shall not be responsible for
any damages, including but not limited to consequential dam-
ages, caused by reliance on the material presented, including but
not limited to typographical errors.
Declaration of Conformity
Declaration of Conformity Documents are provided at:
www.psionteklogix.com/DoC
Table of Contents
1.0 Important Multi-Dock Safety Instructions 1
2.0 Installation 3
3.0 Multi-Dock Operation 4
3.1 Operator Controls 4
3.2 Charging the Handheld Computer Battery 6
4.0 Cleaning and Maintaining the Multi-Dock 7
5.0 Troubleshooting 8
5.1 Power LED Does Not Light Up 8
5.2 No Charge Indication on the Handheld Computer
in the Multi-Dock 8
5.3 No Green Link LED (RJ45 Connector)
When Connected to a Network 8
5.4 No Yellow..LED..Connected to ..Network 9
6.0 Support Services 10
6.1 Technical Support and Repair Services 10
6.2 International Support 11
6.3 Worldwide Ofces and Subsidiaries 11
1Psion Teklogix WAPro Multi-Dock User Manual
Multi-Dock
WA4204-G2 7525M/C, 7527C
WA4304-G2 7525S, 7527S
1.0 Important Multi-Dock Safety Instructions
Important: SAVE THESE INSTRUCTIONS – This manual
contains important safety and operating instructions
for the Multi-Dock.
Before using the Multi-Dock, read all instructions and•
cautionary markings on (1) the Multi-Dock, (2) the
WORKABOUT PRO computer,
Use of an attachment not recommended or sold by the•
Multi-Dock manufacturer may result in re, electric shock,
or personal injury.
To reduce risk of damage to the electric plug and cord when•
unplugging the charger, pull the plug rather than the cord.
Make sure the cord is positioned so that it is not stepped on,•
tripped over, or otherwise subjected to damage or stress.
Do not operate the charger with a damaged cord or plug.•
Replace immediately.
Do not operate the charger if it has received a sharp blow,•
been dropped, or otherwise damaged in any way; it should
be inspected by qualied service personnel.
Psion Teklogix WAPro Multi-Dock User Manual2
Do not disassemble the charger; it should be repaired by•
qualied service personnel. Incorrect reassembly may result
in electric shock or re.
To reduce risk of electric shock, unplug the charger from•
the outlet before attempting any maintenance or cleaning.
An extension cord should not be used unless absolutely•
necessary. Use of an improper extension cord could result
in re or electric shock.
If an extension cord must be used, make sure:•
The plug pins on the extension cord are the same number,•
size, and shape as those on the charger.
The extension cord is properly wired and in good electrical•
condition and that the wire size is larger than 16 AWG.
Do not expose the Multi-Dock to rain or snow.•
Do not use the charger if any of the batteries or the charger•
get more than lukewarm. The equipment should be in-
spected by qualied personnel.
THE MAINS POWER CORD SHALL COMPLY WITH NATIONAL
SAFETY REGULATIONS OF THE COUNTRY WHERE THE EQUIP-
MENT IS TO BE SOLD.
CHARGER IS COMPATIBLE WITH 100-240VAC MAINS.
FOR INDOOR USE ONLY
This manual suits for next models
1
Table of contents
Other Psion Teklogix Docking Station manuals
