Psion Teklogix WA1210-G2 User manual
WA1210-G2 & WA1310-G2
WORKABOUT PRO
Powered Vehicle Cradle User Manual
September, 2007 Part N0. 400209.A
© COPYRIGHT 2007 BY PSION TEKLOGIX INC., MISSISSAUGA, ONTARIO
This document and the information it contains is the property of
Psion Teklogix Inc., is issued in strict condence, and is not to
be reproduced or copied, in whole or in part, except for the sole
purpose of promoting the sale of Psion Teklogix manufactured
goods and services. Furthermore, this document is not to be used
as a basis for design, manufacture, or sub-contract, or in any
manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix provides a return to factory warranty on this
product for a period of twelve (12) months in accordance with
the statement of Warranty and Product Support provided at:
www.psionteklogix.com/warranty.
The warranty on Psion Teklogix manufactured equipment does
not extend to any product that has been tampered with, altered,
or repaired by any person other than an employee of an autho-
rized Psion Teklogix service organization. See Psion Teklogix
terms and conditions of sale for full details.
Important: Psion Teklogix warranties take effect on the date of
shipment.
Service
Psion Teklogix provides a complete range of product support
services to its customers.
For detailed information, please refer to Chapter 5: Support
Services & Worldwide Ofces. This section also provides
information about accessing support services through the Psion
Teklogix web site.
Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
This Product, and its accessories, comply with the requirements
of the Waste Electrical and Electronic Equipment (WEEE)
Directive 2002/96/EC.
If your end-of-life Psion Teklogix product or accessory carries a
label as shown here, please contact your local country repre-
sentative for details on how to arrange recycling. For a list of
international subsidiaries, please go to:
http://www.psionteklogix.com/EnvironmentalCompliance
List of Approvals
North America
EMC: FCC part 15, subpart B; class B
Europe
EMC and Low Voltage Directives
This equipment complies with the essential requirements of
EMC Directive 2004/108/EC and Low Voltage Directive
72/23/EEC Declaration of Conformity available on
www.psionteklogix.com/DoC
CE Mark
When used in a residential, commercial or light industrial
environment the product and its approved UK and European
peripherals fulll all requirements for CE marking.
E mark: vehicle directive 95/54/EEC
Most of the world countries - safety approvals covered by CB
report based on EN60950-1.
Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC
What is RoHS?
The European Union has mandated that high environmental
standards be met in the design and manufacture of electronic and
electrical products sold in Europe, to reduce hazardous substanc-
es from entering the environment.
The “Restriction on Hazardous Substances Directive (RoHS)”
prescribes the maximum trace levels of lead, cadmium, mercury,
hexavalent chromium, and ame retardants PBB and PBDE that
may be contained in a product. Only products meeting these
high environmental standards may be “placed on the market” in
EU member states after July 1, 2006.
RoHS Logo
Although there is no legal requirement to mark the RoHS-com-
pliant products, Psion Teklogix Inc. indicates its compliance
with the directive as follows:
The RoHS logo located either on the back of the product or un-
derneath the battery in the battery compartment (or on a related
accessory such as the charger or docking station) signies that
the product is RoHS-compliant as per the EU directive. Other
than as noted below, a Psion Teklogix product that does not have
an accompanying RoHS logo signies that it was placed on the
EU market prior to July 1, 2006, and is thereby exempt from the
directive.
Note: Not all accessories or peripherals will have a RoHS logo
due to physical space limitations or as a result of their
exempt status.
Disclaimer
Every effort has been made to make this material complete,
accurate, and up-to-date. In addition, changes are periodically
added to the information herein; these changes will be incorpo-
rated into new editions of the publication.
Psion Teklogix Inc. reserves the right to make improvements
and/or changes in the product(s) and/or the program(s) described
in this document without notice, and shall not be responsible for
any damages, including but not limited to consequential dam-
ages, caused by reliance on the material presented, including but
not limited to typographical errors.
Declaration of Conformity
Declaration of Conformity Documents are provided at:
www.psionteklogix.com/DoC
Table of Contents
1.0 Important Vehicle Cradle Instructions 1
2.0 Vehicle Cradle Mounting Recommendations 2
2.1 Cable Arrangement 7
2.2 Port Replicator Cable 7
3.0 The Vehicle Cradle 8
3.1 Wiring Vehicle Power to the Vehicle Cradle 8
4.0 Using the Vehicle Cradle 10
4.1 Cleaning and Maintaining the Vehicle Cradle 12
5.0 Support Services and Worldwide Ofces 13
5.1 Technical Support 13
5.2 Product Repairs 14
5.3 Worldwide Ofces 14
1Psion Teklogix WAPro Vehicle Cradle User Manual
Powered Vehicle Cradle:
WA1210-G2 7525M/C, 7527 C
WA1310-G2 7525S, 7527S
1.0 Important Vehicle Cradle Instructions
Before using a Vehicle Cradle, read all instructions and•
markings on the housing.
Do not operate a Vehicle Cradle if struck by a sharp blow,•
dropped, or otherwise damaged in any way; qualied ser-
vice personnel should inspect for internal damage.
Important: SAVE THESE INSTRUCTIONS – This manual
contains important operating and maintenance
instructions for the Vehicle Cradle series.
DO NOT EXPOSE TO RAIN OR SNOW! However, the
Vehicle Cradles are designed to accept a wet
WORKABOUT PRO without harmful effect.
Important: This WORKABOUT PRO Vehicle cradle cannot
be used with other non- WORKABOUT PRO
cradle accessories. Although they may share the
same battery terminating connector, they are
designed with different applications in mind.
Psion Teklogix WAPro Vehicle Cradle User Manual2
Important: The WA1210-G2, and WA1310-G2 Vehicle
Cradles have a cable that terminates in a 15-pin
connector. Please do not connect a VGA Monitor
or a Computer to these 15-pin connectors. This will
interfere with the WORKABOUT PRO operation.
WARNING - The Vehicle Cradle cannot be used
with other non- WORKABOUT PRO cradle
accessories. Although they may share the same
battery terminating connector, they are designed
with different applications in mind.
2.0 Vehicle Cradle Mounting Recommendations
Important: Before mounting a Vehicle Cradle in a vehicle,
there are a number of operator safety issues that
require careful attention. An improperly mounted
Vehicle Cradle may result in one or more of the
following: operator injury, operator visibility
obstruction, operator distraction and/or poor ease
of egress for the operator. Psion Teklogix strongly
recommends that you seek professional mounting
advice from the vehicle manufacturer.
Cable routing within a vehicle cab also requires careful consid-
eration, especially for separately tethered scanners and other
devices with loose cables. If you are unable to obtain suitable
advice, contact Psion Teklogix for assistance (see Chapter 5:
Support Services & Worldwide Ofces).
This manual suits for next models
6
Table of contents
Other Psion Teklogix Docking Station manuals
