Proware SB-1413-UA Manual
USB and eSATA to SATA II
RAID Subsystem
Installation and Configuration
Manual
Revision 1.0
P/N: PW020000000348
USB and eSATA to SATA II RAID Subsystem
Installation and Configuration Manual 2
Table of Contents
Preface ............................................................................................................ 5
Before You Begin.......................................................................................... 6
Safety Guidelines...................................................................................................................................................6
Controller Configuration....................................................................................................................................6
Packaging, Shipment and Delivery ...............................................................................................................6
Unpacking the Subsystem ................................................................................................................................7
Chapter 1 Introduction ............................................................................. 8
1.1 Key Features .................................................................................................................................................9
1.2 Identifying Parts of the RAID Subsystem......................................................................................10
1.2.1 Front View...........................................................................................................................................10
1.2.2 Rear View ............................................................................................................................................13
1.3 Technical Specifications.........................................................................................................................14
1.4 RAID Concepts ..........................................................................................................................................15
1.5 Array Definition.........................................................................................................................................19
1.5.1 Raid Set................................................................................................................................................19
1.5.2 Volume Set.........................................................................................................................................19
1.5.3 Easy to Use Features .....................................................................................................................20
1.5.3.1 Instant Availability/Background Initialization ..............................................................20
1.5.3.2 Array Roaming .........................................................................................................................20
1.5.3.3 Online Capacity Expansion..................................................................................................20
1.3.3.4 Online RAID Level and Stripe Size Migration.............................................................21
1.5.4 High Availability..............................................................................................................................22
1.5.4.1 Creating Hot Spares ...............................................................................................................22
1.5.4.2 Hot-Swap Disk Drive Support............................................................................................22
1.3.4.3 Hot-Swap Disk Rebuild.........................................................................................................22
Chapter 2 Getting Started...................................................................... 23
2.1 Preparing the Subsystem and Powering On ...............................................................................23
2.2 Installing Hard Drives.............................................................................................................................23
USB and eSATA to SATA II RAID Subsystem
3Installation and Configuration Manual
Chapter 3 RAID Configuration .............................................................. 25
3.1 Configuring Through a Terminal........................................................................................................25
3.2 Configuring Using the LCD Panel......................................................................................................30
3.3 Menu Diagram ..........................................................................................................................................32
3.4 Web browser-based Remote RAID management via R-Link Port.....................................38
3.5 Quick Create..............................................................................................................................................40
3.6 Raid Set Functions...................................................................................................................................41
3.6.1 Create Raid Set.................................................................................................................................41
3.6.2 Delete Raid Set .................................................................................................................................42
3.6.3 Expand Raid Set................................................................................................................................42
3.6.4 Offline Raid Set.................................................................................................................................44
3.6.5 Activate Incomplete Raid Set .....................................................................................................45
3.6.6 Create Hot Spare .............................................................................................................................47
3.6.7 Delete Hot Spare .............................................................................................................................47
3.6.8 Rescue Raid Set.................................................................................................................................48
3.7 Volume Set Function .............................................................................................................................49
3.7.1 Create Volume Set ..........................................................................................................................49
3.7.2 Delete Volume Set...........................................................................................................................51
3.7.3 Modify Volume Set .........................................................................................................................52
3.7.3.1 Volume Expansion...................................................................................................................53
3.7.4 Volume Set Migration ................................................................................................................53
3.7.5 Check Volume Set............................................................................................................................54
3.7.6 Stop Volume Set Check.................................................................................................................55
3.8 Physical Drive............................................................................................................................................55
3.8.1 Create Pass-Through Disk ............................................................................................................55
3.8.2 Modify Pass-Through Disk...........................................................................................................56
3.8.3 Delete Pass-Through Disk ............................................................................................................57
3.8.4 Identify Selected Drive ..................................................................................................................57
3.9 System Controls.......................................................................................................................................58
3.9.1 System Configuration.....................................................................................................................58
3.9.2 EtherNet Config................................................................................................................................60
3.9.3 Alert By Mail Config.......................................................................................................................61
3.9.4 SNMP Configuration.......................................................................................................................62
3.9.5 NTP Configuration ...........................................................................................................................63
3.9.6 View Events/Mute Beeper ............................................................................................................64
3.9.7 Generate Test Event ........................................................................................................................65
USB and eSATA to SATA II RAID Subsystem
Installation and Configuration Manual 4
3.9.8 Clear Event Buffer.............................................................................................................................65
3.9.9 Modify Password..............................................................................................................................66
3.9.10 Upgrade Firmware .........................................................................................................................66
3.9.11 Restart Controller..........................................................................................................................66
3.10 Information Menu ................................................................................................................................67
3.10.1 RaidSet Hierarchy ...........................................................................................................................67
3.10.2 System Information........................................................................................................................69
3.10.3 Hardware Monitor .........................................................................................................................70
3.11 Creating New Raid Set or Reconfiguring an Existing Raid Set.........................................71
3.12 Upgrading the Firmware......................................................................................................................72
USB and eSATA to SATA II RAID Subsystem
5Installation and Configuration Manual
Preface
About this manual
This manual provides information regarding the quick installation and hardware features of the
RAID subsystem. This document also describes how to use the storage management software.
Information contained in the manual has been reviewed for accuracy, but not for product warranty
because of the various environment/OS/settings. Information and specifications will be changed
without further notice.
This manual uses section numbering for every topics being discussed for easy and convenient way
of finding information in accordance with the user’s needs. The following icons are being used for
some details and information to be considered in going through with this manual:
Copyright
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written consent.
Trademarks
All products and trade names used in this document are trademarks or registered trademarks of
their respective holders.
Changes
The material in this document is for information only and is subject to change without notice.
IMPORTANT!
These are the important information that the user must remember.
WARNING!
These are the warnings that the user must follow to avoid
unnecessary errors and bodily injury during hardware and software
operation of the subsystem.
CAUTION:
These are the cautions that user must be aware to prevent damage
to the equipment and its components.
NOTES:
These are notes that contain useful information and tips that the
user must give attention to in going through with the subsystem
operation.
USB and eSATA to SATA II RAID Subsystem
Installation and Configuration Manual 6
Before You Begin
Before going through with this manual, you should read and focus to the following safety
guidelines. Notes about the subsystem’s controller configuration and the product packaging and
delivery are also included.
Safety Guidelines
To provide reasonable protection against any harm on the part of the user and to obtain maximum
performance, user is advised to be aware of the following safety guidelines particularly in handling
hardware components:
Upon receiving of the product:
Place the product in its proper location.
To avoid unnecessary dropping out, make sure that somebody is around for immediate
assistance.
It should be handled with care to avoid dropping that may cause damage to the product.
Always use the correct lifting procedures.
Upon installing of the product:
Ambient temperature is very important for the installation site. It must not exceed 30◦C. Due to
seasonal climate changes; regulate the installation site temperature making it not to exceed
the allowed ambient temperature.
Before plugging-in any power cords, cables and connectors, make sure that the power switches
are turned off. Disconnect first any power connection if the power supply module is being
removed from the enclosure.
Outlets must be accessible to the equipment.
All external connections should be made using shielded cables and as much as possible should
not be performed by bare hand. Using anti-static hand gloves is recommended.
In installing each component, secure all the mounting screws and locks. Make sure that all
screws are fully tightened. Follow correctly all the listed procedures in this manual for reliable
performance.
Controller Configuration
This RAID subsystem supports single controller configuration.
Packaging, Shipment and Delivery
Before removing the subsystem from the shipping carton, you should visually inspect the
physical condition of the shipping carton.
Unpack the subsystem and verify that the contents of the shipping carton are all there and in
good condition.
Exterior damage to the shipping carton may indicate that the contents of the carton are
damaged.
If any damage is found, do not remove the components; contact the dealer where you purchased the
subsystem for further instructions.
USB and eSATA to SATA II RAID Subsystem
7Installation and Configuration Manual
Unpacking the Subsystem
The package contains the following items:
• RAID subsystem unit
• One power cord
• One RJ-45 Ethernet cable
• One external serial cable (RJ-11 to DB9)
• One external SATA cable
• One USB cable
• Installation Reference Guide
• Spare screws, etc.
USB and eSATA to SATA II RAID Subsystem
Installation and Configuration Manual 8
Chapter 1 Introduction
The RAID Subsystem
Unsurpassed Value
Most cost-effective SATA II RAID Subsystem
Application Flexibility
Extends useful life by adapting to future IT requirements
Easy Installation, upgrade & Maintenance
Provide a fast and easy way to install and upgrade the storage. Simplified maintenance reduces
ongoing IT labor costs.
Exceptional Manageability
Graphical User Interface (GUI) provides easy way for users to remotely manage and configure
the storage
Menu-driven LCD front panel makes it convenient for users to locally manage the storage
Green Power Concept
Saves power by adopting the new technology “MAID” (Massive Arrays of Idle Disks).
USB and eSATA to SATA II RAID Subsystem
9Installation and Configuration Manual
1.1 Key Features
Subsystem Features:
eSATA (3Gbps) / USB 2.0 (480Mbps) dual host interface
Multiple Volumes for host access.
Over 2TB support
Supports hot spare and automatic hot rebuild
Allows online capacity expansion within the enclosure
Local audible event notification alarm
Supports password protection
Built-in serial port interface for remote event notification
Tagged command queuing for 256 commands, allows for overlapping data streams
Transparent data protection for all popular operating systems
RAID Management:
Smart-function LCD panel
Environmental monitoring unit
Real time drive activity and status indicators
Web-based GUI management utility
USB and eSATA to SATA II RAID Subsystem
Installation and Configuration Manual 10
1.2 Identifying Parts of the RAID Subsystem
The illustrations below identify the various parts of the subsystem.
1.2.1 Front View
Table of contents
Other Proware Storage manuals
Proware
Proware EN-2126JS6-SQX User manual
Proware
Proware EP-2126-SS User manual
Proware
Proware EP-3163J/JD-SCSC User manual
Proware
Proware DP-503-F4A3 User manual
Proware
Proware Fibre to SAS/SATA II RAID Subsystem User manual
Proware
Proware EP-3164D-GAS3 User manual
Proware
Proware EP-4246J-S6S6 User manual
Proware
Proware EP-3163S-F8S6 User manual
Proware
Proware EN-1400A6B-CM User manual
Proware
Proware EP-2126-SA3 User manual
