ProMinent alpha ALPc 1001 User manual
Motor-driven Metering Pump
alpha ALPc
Operating instructions
EN
Original operating instructions (2006/42/EC)Part no. 986353 BA ALP 015 08/18 EN
Please carefully read these operating instructions before use. · Do not discard.
The operator shall be liable for any damage caused by installation or operating errors.
The latest version of the operating instructions are available on our homepage.
Supplementary information
Fig. 1: Please read!
Read the following supplementary information
in its entirety! You will benefit more from using
the operating instructions should you already
know this information.
The following are highlighted separately in the
document:
nEnumerated lists
Instructions
ðOutcome of the instructions
Ä ‘State the identity code and serial number’
on page 2
: Links to points in this chapter
- refer to ... : References to points in this docu‐
ment or another document
[Keys]
Information
This provides important information
relating to the correct operation of the
unit or is intended to make your work
easier.
Safety Information
Safety information is identified by pictograms -
see Safety Chapter.
Validity
These operating instructions conform to current
EU regulations applicable at the time of publi‐
cation.
State the identity code and serial number
Please state identity code and serial number,
which you can find on the nameplate when you
contact us or order spare parts. This enables
us to clearly identify the unit type and material
versions.
Supplemental directives
2
Table of contents
1 Identity code............................................................................................................................ 5
2 Safety chapter......................................................................................................................... 7
3 Storage, Transport and Unpacking....................................................................................... 12
4 Overview of equipment......................................................................................................... 13
5 Functional description........................................................................................................... 14
5.1 Power end.................................................................................................................... 14
5.2 Liquid End.................................................................................................................... 14
6 Assembly............................................................................................................................... 15
7Installation, hydraulic............................................................................................................. 16
7.1 Installing hose lines...................................................................................................... 17
7.1.1 Installation of the suction and discharge line............................................................ 17
7.1.2 Installation of metering pumps with bleed valve........................................................ 20
7.1.3 Basic installation notes.............................................................................................. 20
8 Electrical installation.............................................................................................................. 23
9 Start up.................................................................................................................................. 24
10 Maintenance.......................................................................................................................... 28
11 Repairs.................................................................................................................................. 31
11.1 Cleaning valves.......................................................................................................... 31
11.2 Replacing the diaphragm........................................................................................... 32
11.3 Replacing the complete dosing head......................................................................... 36
12 Troubleshooting.................................................................................................................... 37
12.1 Faults and troubleshooting......................................................................................... 38
12.2 All other faults............................................................................................................. 39
13 Decommissioning and disposal............................................................................................. 40
13.1 Decommissioning....................................................................................................... 40
13.2 Disposal...................................................................................................................... 41
14 Technical data....................................................................................................................... 42
15 Design Documents................................................................................................................ 46
16 Dimensional drawings........................................................................................................... 47
17 Further order information ..................................................................................................... 48
Table of contents
3
18 Declaration of Conformity for Machinery............................................................................... 49
Table of contents
4
1 Identity code
alpha product range, version c
ALPc Type Capacity
bar l/h (at 50 Hz)
1001 10 0.9
1002 10 1.8
1004 10 3.5
1008 10 7.7
0707 7 6.9
0417 4 17.0
0230 2 29.7
Dosing head material
PPE PP/PP/EPDM
PPB PP/PP/FPM-B
NPE Clear acrylic/PVC//EPDM
NPB Clear acrylic/PVC/FPM
PVT PVDF/PVDF/PTFE
Seal material
2 Without valve spring, with bleed valve
3 with 2 valve springs (approx. 0.1 bar, material 1.4571), with bleed valve
Hydraulic connector
0 Standard connection in line with technical data
Design
0 with ProMinent logo
M modified
Electrical connection
Identity code
5
alpha product range, version c
A 230 V , 50/60 Hz, 2 m European
B 230 V, 50/60 Hz, 2 m Swiss
C 230 V, 50/60 Hz, 2 m Australian
D 115 V , 50/60 Hz, 2 m USA
Accessories
0 no accessories
1 with foot and injection valve, 2 m PVC suction line, 5 m
metering line
Identity code
6
2 Safety chapter
Identification of safety notes
The following signal words are used in these
operating instructions to denote different severi‐
ties of danger:
Signal word Meaning
WARNING Denotes a possibly
dangerous situation.
If this is disregarded,
you are in a life-
threatening situation
and this can result in
serious injuries.
CAUTION Denotes a possibly
dangerous situation.
If this is disregarded,
it could result in slight
or minor injuries or
material damage.
Warning signs denoting different types of
danger
The following warning signs are used in these
operating instructions to denote different types
of danger:
Warning signs Type of danger
Warning – automatic
start-up.
Warning – hand inju‐
ries.
Warning – high-
voltage.
Warning signs Type of danger
Warning – danger
zone.
Intended use
nOnly use the pump to meter liquid feed
chemicals.
nOnly use the pump after it has been cor‐
rectly installed and started up in accord‐
ance with the technical data and specifica‐
tions contained in the operating
instructions.
nObserve the general limitations with regard
to viscosity limits, chemical resistance and
density - see also ProMinent® Resistance
List in the Product Catalogue or at
www.prominent.com!
nAll other uses or modifications are pro‐
hibited.
nThe pump is not intended for the metering
of gaseous media and solids.
nThe pump is not intended to meter flam‐
mable media.
nThe pump is not intended for the metering
of explosive media.
nThe pump is not intended for operation in
areas at risk from explosion.
nThe pump is not intended for exterior
applications without the implementation of
suitable protective measures.
nThe pump should only be operated by
trained and authorised personnel, see the
following "Qualifications" table.
nYou have a responsibility to adhere to the
information contained in the operating
instructions at the different phases of the
unit's service life.
Safety chapter
7
Qualification of personnel
Action Qualification
Storage, transport,
unpacking
Instructed person
Assembly Technical personnel,
service
Planning hydraulic
installation
Qualified personnel
who have a thorough
knowledge of
metering pumps.
Hydraulic installation Technical personnel,
service
Installation, electrical Electrical technician
Operation Instructed person
Maintenance, repair Technical personnel,
service
Decommissioning,
disposal
Technical personnel,
service
Troubleshooting Technical personnel,
electrical technician,
instructed person,
service
Explanation of the terms:
Technical personnel
A qualified employee is deemed to be a person
who is able to assess the tasks assigned to him
and recognise possible dangers based on
his/her technical training, knowledge and expe‐
rience, as well as knowledge of pertinent regu‐
lations.
Note:
A qualification of equal validity to a technical
qualification can also be gained by several
years employment in the relevant work area.
Electrical technician
Electrical technicians are deemed to be people,
who are able to complete work on electrical
systems and recognise and avoid possible dan‐
gers independently based on their technical
training and experience, as well as knowledge
of pertinent standards and regulations.
Electrical technicians should be specifically
trained for the working environment in which
they are employed and know the relevant
standards and regulations.
Electrical technicians must comply with the pro‐
visions of the applicable statutory directives on
accident prevention.
Instructed person
An instructed person is deemed to be a person
who has been instructed and, if required,
trained in the tasks assigned to him/her and
possible dangers that could result from
improper behaviour, as well as having been
instructed in the required protective equipment
and protective measures.
Service
Customer Service department refers to service
technicians, who have received proven training
and have been authorised by ProMinent or Pro‐
Maqua to work on the system.
Safety chapter
8
Safety information
WARNING!
Warning about personal and material
damage
The pump can start to pump, as soon
as it is connected to the mains voltage.
– Install an emergency cut-off switch
in the pump power supply line or
integrate the pump in the emer‐
gency cut-off management of the
system.
WARNING!
Danger of electric shock
A mains voltage may exist inside the
pump housing.
– If the pump housing has been
damaged, you must disconnect it
from the mains immediately. It
may only be returned to service
after an authorised repair.
WARNING!
Warning of hazardous feed chemical
Should a dangerous feed chemical be
used: it may escape from the hydraulic
components when working on the
pump, material failure or incorrect han‐
dling of the pump.
– Take appropriate protective meas‐
ures before working on the pump
(e.g. safety glasses, safety
gloves, ...). Adhere to the material
safety data sheet for the feed
chemical.
–Drain and flush the liquid end
before working on the pump.
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very
serious injuries.
Please ensure when handling haz‐
ardous substances that you have read
the latest safety data sheets provided
by the manufacture of the hazardous
substance. The actions required are
described in the safety data sheet.
Check the safety data sheet regularly
and replace, if necessary, as the
hazard potential of a substance can be
re-evaluated at any time based on new
findings.
The system operator is responsible for
ensuring that these safety data sheets
are available and that they are kept up
to date, as well as for producing an
associated hazard assessment for the
workstations affected.
Safety chapter
9
CAUTION!
Warning of feed chemical spraying
around
Feed chemical can spray out of the
hydraulic components if they are
manipulated or opened due to pressure
in the liquid end and adjacent parts of
the system.
– Disconnect the pump from the
mains power supply and ensure
that it cannot be switched on again
by unauthorised persons.
–Depressurise the system before
commencing any work on
hydraulic parts.
CAUTION!
Warning of feed chemical spraying
around
An unsuitable feed chemical can
damage the parts of the pump that
come into contact with the chemical.
– Take into account the resistance
of the wetted materials and the
ProMinent Resistance List when
selecting the feed chemical - see
the ProMinent Product Catalogue
or visit ProMinent.
CAUTION!
Warning of feed chemical spraying
around
The metering pump can generate a
multiple of its rated pressure. Hydraulic
parts can rupture if a discharge line is
blocked.
– Correctly install a relief valve in the
discharge line downstream of the
metering pump.
CAUTION!
Danger of personnel injury and material
damage
The use of untested third party parts
can result in personnel injuries and
material damage.
– Only fit parts to metering pumps,
which have been tested and rec‐
ommended by ProMinent.
CAUTION!
Danger from incorrectly operated or
inadequately maintained pumps
Danger can arise from a poorly acces‐
sible pump due to incorrect operation
and poor maintenance.
– Ensure that the pump is acces‐
sible at all times.
–Adhere to the maintenance inter‐
vals.
Safety chapter
10
This manual suits for next models
7
Table of contents
Other ProMinent Water Pump manuals
ProMinent
ProMinent EXtronic EXBa User manual
ProMinent
ProMinent Makro/ 5 M5Ka User manual
ProMinent
ProMinent Beta BT4b User manual
ProMinent
ProMinent von Taine 0807 PP/FKM User manual
ProMinent
ProMinent Makro TZ User manual
ProMinent
ProMinent Sigma/ 2 Control S2Cb User manual
ProMinent
ProMinent Hydro/4 HP4a User manual
ProMinent
ProMinent mikro g/5a User manual
ProMinent
ProMinent 10022 Operating instructions
ProMinent
ProMinent Sigma/ 1 S1Ba User manual
ProMinent
ProMinent Meta MTKa User manual
ProMinent
ProMinent Sigma 1 Series Operating instructions
ProMinent
ProMinent DULCOflex DFDa User manual
ProMinent
ProMinent Sigma/3 Basic S3Ba Series User manual
ProMinent
ProMinent Hydro 2 Series User manual
ProMinent
ProMinent DULCOnneX User manual
ProMinent
ProMinent Beta BT4b User manual
ProMinent
ProMinent DULCO flex Control - DFXa User manual
ProMinent
ProMinent DULCO flex DFCa User manual
ProMinent
ProMinent Evolution E1Sa User manual
Popular Water Pump manuals by other brands
Sykes AmeriPumps
Sykes AmeriPumps GP100M Operation and maintenance instructions
DUROMAX
DUROMAX XP WX Series user manual
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 operating instructions
Franklin Electric
Franklin Electric IPS Installation & operation manual
Xylem
Xylem e-1532 Series instruction manual
Milton Roy
Milton Roy PRIMEROYAL instruction manual