Project Source SB30B User manual
1
ITEM #5217212, 5217213
MODEL #SB30B, SB36B
SINK BASE CABINET
ASSEMBLY INSTRUCTION
Español p. 16
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
AS23020
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also
Scan for assembly video
PROJECT SOURCE and logo design are
trademarks or registered trademarks of LF,
LLC. All rights reserved.
2
TABLE OF CONTENTS
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................4
Safety Information............................................................................................................................5
Preparation.......................................................................................................................................5
Assembly or Installation Instructions................................................................................................6
Toe-Kick Assembly Instruction..........................................................................................................12
Care and Maintenance..........................................................................................................................13
Troubleshooting..............................................................................................................................13
Warranty............................................................................................................................................14
Replacement Parts..........................................................................................................................15
3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A LH GABLE 1
B RH GABLE 1
C BOTTOM PANEL 1
D TOP FRONT RAIL 1
E BACK RAIL 2
F BACK PANEL (PA) 1
G DOOR 2
H TOP DRAWER FRONT 1
J TOP BACK RAIL 1
Drawer Front
4
HARDWARE CONTENTS (shown actual size)
Minix Cam Lock
Qty. 12
Hinge Mounting Plate
Qty. 4
105oHinge
Qty. 4
CSK Screw 5/8
Qty. 16
Minix Shaft
Qty. 12
PVC Adjustable Leg
Qty. 4
Leg Clip
Qty. 2
BBAA CC DD
EE FF HHGG
Wooden Dowel
Qty. 14
JJ
Bumper 2MM
Qty. 6
Assembly Bracket 2
Qty. 2
KK
Assembly Bracket 1
Qty. 2
LLII
Pan Head Screw 5/8
(Toe-Kick Clip - 4)
Qty. 12
5
SAFETY INFORMATION
• Electric, plumbing, gas lines, and other utilities are frequently installed or embedded behind wall
Where cabinets are being installed. To reduce the risk of shock, explosion or injury, turn o all gas,
Electrical and water connections prior to performing any work. Shut o the power to any appliances
and receptacles in the kitchen including lights at the fuse-breaker box. Use a circuit tester to ensure
the power is o. Failure to follow these instructions may result in property damage and serious or fatal
Injury. If you do not feel condent in your ability to ensure that you will not make contact with utilities
behind a wall during installation, please contact a licensed contractor to install the cabinets.
• Prior to starting the installation, ensure you read and understand the entire installation guide.
• At least two people are required for safe installation.
• Screws or ttings are not included. Select suitable screws and ttings that are sucient to secure the
Cabinets properly to the wall. If you are uncertain, contact lowes customer service. Failure to properly
secure the cabinets may result in serious injury!
• Do not over-tighten connectors (screws, bolts, etc.). Overtightening can lead to product damage.
WARNING
CAUTION
• Check the inventory you received against the bill of materials you have ordered to ensure all items
Have been delivered. If there are missing or damaged items contact lowes customer service.
• Be sure to check all packing materials carefully for small parts that may have come loose inside the
Carton during shipment. If parts are missing, contact lowes customer service.
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes
Tools required for assembly (not included): list here tools that are required but not included.
Example: wrench, phillips screwdriver, hammer, pliers
6
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
Minix shaft
Minix cam lock
Wooden dowel
x 12
x 12
x 14
1
2
3
BB
BB
AA
AA
JJ
JJ
1. Using a rubber mallet, tap in wooden dowels in the
correct positions as per the illustration. For added
strength, apply a small amount of wood glue to each
dowel prior to placement (not included).
2. Using a phillips head screwdriver, fasten
the minix shafts in the correct positions as
shown.
3. Insert the minix cam lock in the correct positions
based on the illustration. Please note the arrow mark
should face the bore hole as per the illustration.
7
ASSEMBLY INSTRUCTIONS
5
4
6
Hardware Used
Pan head screw 5/8 x 4
II
Hardware Used
Hardware Used
Hinge mounting plate
105oHinge
x 4
x 4
FF
GG
Bumper 2MM x 4
CC
II
FF
CC GG
LL
Assembly bracket 1 x 2
LL
4. Place the assembly bracket 1 in the correct
position as per the illustration. Use the pan head
screw as shown.
5. Using a phillips head screwdriver, attach the
mounting plate as shown in the illustration.
6. Insert the hinge in the bore hole. Using a phillips
head screwdriver, turn the pre-installed screws
clockwise to lock into place.
Place the bumper on the door as shown.
8
ASSEMBLY INSTRUCTIONS
7. Place the bumper on the door as shown
8
7
9
Hardware Used
Hardware Used
Bumper 2MM x 2
CC
CC
II
KK
Pan head screw 5/8 x 4
II
Assembly bracket 2 x 2
KK
8. Using a phillips head screwdriver, place the
assembly bracket 2 in the desired position with pan
head screw 5/8 as shown in the illustration. Be
careful not to over-tighten as this may damage the
product.
9. Assemble the cabinets parts as per the illustration.
Using a phillips head screwdriver, rotate the minix
cam clockwise to fasten into place. Ensure all cams
are locked into place before moving the cabinet.
9
ASSEMBLY INSTRUCTIONS
10. Insert the back panel as shown in the drawing.
11
10
12
DD
HH
11. Assemble the cabinets parts as per the illustration.
Using a phillips head screwdriver, rotate the minix
cam clockwise to fasten into place. Ensure all cams
are locked into place before moving the cabinet.
12. Position the mounting bracket for the legs on the
underside of the cabinet box and using a phillips
head screwdriver, secure into place with csk screws
5/8” as per the illustration.
Hardware Used
PVC adjustable leg x 4
DD
Leg Mounting bracket
CSK screw 5/8 x 16
HH
10
ASSEMBLY INSTRUCTIONS
14
15
13
15. YOU’RE FINISHED – ENJOY
13. Insert the assembled drawer box into the
assembled cabinet box as per the illustration.
105oHinge
Hinge guide
14. Mount the door on the cabinet by connecting the
hinges on the door to the mounting plates on
the box. Use the Hinge guide below for detailed
instructions.
If the adjustments to the door are needed,
instructions are available on page 11 of this manual.
This manual suits for next models
3
Table of contents
Languages:
Other Project Source Indoor Furnishing manuals
Project Source
Project Source V38031-PS User manual
Project Source
Project Source W3030B User manual
Project Source
Project Source W3012B User manual
Project Source
Project Source V38049-PS, V38149-PS, V38061-PS, V38161-PS User manual
Project Source
Project Source V26031-PS User manual
Project Source
Project Source H5-1190D-2A2C User manual
Project Source
Project Source B30B User manual
Project Source
Project Source V36631-PS User manual
Project Source
Project Source M115MV User manual
Project Source
Project Source SCR36 User manual
Project Source
Project Source 01715-1 User manual
Project Source
Project Source 5217236 User manual
Project Source
Project Source VANITY User manual
Project Source
Project Source DC2430R User manual
Project Source
Project Source 999-LUT18WHT User manual
Project Source
Project Source 105M User manual
Project Source
Project Source V26137-PS User manual
Project Source
Project Source W3012B User manual
Project Source
Project Source LS200409 User manual
