INTRODUCTION
SCOPE and PURPOSE
This document is intended to be a full description of the PF2200-SB product and the
intended use in accordance with the product life cycle. This document outlines the following:
•PF2200-SB Product Description: This section describes the intended use of the
product; including I/O, operating sequence, general requirements, and approvals.
•Installation and Commissioning: this section describes the actions needed to
perform installation and commissioning of the PF2200-SB; including
electrical/mechanical ratings, configuration parameters, mounting considerations,
and warnings.
•Operations and Maintenance: This section describes the actions needed for ongoing
operation and maintenance of the PF2200-SB; including troubleshooting,
maintenance, repair and replacement, decommissioning, and manufacturer
notification.
TERMS and ABBREVIATION
An indication of an abnormal condition in either the
equipment or the process.
Continuous Pilot A pilot which, once placed in operation, is intended to
remain ignited continuously until it is manually
interrupted
Digital Input An input to the system that has two values (Energized or
De-energized).
Non-cycling interruption by an electronic device of a
circuit for functional disconnection and which provides a
disconnection other than by means of an air gap by
satisfying certain electrical requirements in at least one
pole
Device which provides the programming unit with a
signal indicating the presence of absence of flame
Time
Period of time between loss of the sensed flame and the
signal indicating the absence of flame
Flame Detector Self-Checking
Rate
Frequency of self-checking function of the flame
detector (in number of operations per unit of time)
