PROAIM DL-PLRS-P01 User manual

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Polaris Pro Low-Prole Video Camera Dolly (DL-PLRS-P01)

Assembly Manual

2 x End Spacers

Proaim Polaris Pro

Low-Prole Middle Support

Low-Prole Knob

Polaris Pro Camera Dolly Setup

 Loosen the knob of the end spacers of the

Polaris pro camera dolly and mount it on the

light stand (Not Included).

NOTE: It comes with end-spacers that mount on

C-stands & tripods in seconds, allowing you to

start lming in a ash.

 After mounting the end spacers on the stand,

properly tighten it with the knob. Repeat the

same process to insert the second-end spacer.

 Loosen both the knobs of the clamp holder in

the end spacers, as shown in the image.

 After inserting the square speed rails

(Not Included) into the clamp holder, tighten

the knob of the clamp holder to secure the

assembly.

NOTE: The dolly has eight in-line skate wheels

that run smoothly on circular, triangular, and

square-speed rails and at surfaces.

 Now place the Polaris Pro dolly onto the

Square Speed rails (Not Included). Make sure

all wheels are aligned correctly on the track

and dolly runs smoothly.

Assembling of End Spacers

 Tighten the assembly from the bottom of the

Polaris Pro dolly using the locking knob of the

fluid head (Not Included).

 Now, aer mounng the Low-Prole Middle

Support, properly secure it by re-ghtening

the knob. Then align the center part and

aach it to the center support of the track.

 Remove the plate by pushing the pin of the

fluid head (Not Included), as shown in the

image.

 Remove the uid head (Not Included) by

loosening the locking knob and then insert it

into the canter bowl adapter of the Polaris Pro

Dolly.

 Align and place the Polaris Pro dolly onto the

Square Speed Rails (Not Included).

 After loosening the knob of the Low-Profile

Middle Support, mount it onto the C-stand

(Not Included).

Assembling of Fluid Head

 Align and place the wheels of the Polaris Pro

Dolly onto the speed rail track (Not Included).

 Now mount the camera (Not Included) onto

the fluid head (Not Included) by sliding.

 Secure the assembly with the help of the

locking knob of the fluid head.

 Fluid head (Not Included) plate has now been

properly aached to the camera

(Not Included).

Camera Mounng Setup

 Attach the plate of the fluid head

(Not Included) to the bottom of the camera

(Not Included), and then tighten it using the

screw driver.

Assembling of Speed rail track

 Secure and tighten the assembly using the

Low-Profile knob at the bottom of the dolly.

 Loosen and remove the Low-Profile knob of

the Polaris Pro dolly.

 Align and mount the Spinhawk (Not Included)

to the center bowl of the Polaris Pro dolly, as

shown in the image.

NOTE: Mount your uid head/gimbal/camera

setups directly to the Mitchell plaorm with the

help of the four-keyway locang slots without

sacricing stability. Mulple 1/4"-20 and 3/8"-16

threaded holes on the dolly plaorm allow you

to mount varied accessory conjuncons.

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon

and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

utmost support and care unl you use our product.

YOUR PROAIM POLARIS PRO LOW PROFILE VIDEO CAMERA DOLLY

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Table of contents

Other PROAIM Camera Accessories manuals

PROAIM

PROAIM CINEMA DL-PLRS-01 User manual

PROAIM

PROAIM LV-3WAY-01 User manual

PROAIM

PROAIM P-GBD-01 User manual

PROAIM

PROAIM Bowado Pro User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM CG-014-00 User manual

PROAIM

PROAIM FDL-250 User manual

PROAIM

PROAIM WS-284-00 User manual

PROAIM

PROAIM VI-252-00 User manual

PROAIM

PROAIM P-OHBP-01 User manual

PROAIM

PROAIM RCSW-CNBD-01 User manual

PROAIM

PROAIM Cinema Ceries Airwave 15 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM MB 30 User manual

PROAIM

PROAIM SR-SBP-02 User manual

PROAIM

PROAIM 9CTH-TMP User manual

PROAIM

PROAIM SL-051 User manual

PROAIM

PROAIM E-FOCUS PRO ZOOM Manual instruction

PROAIM

PROAIM Bazooka BZ-FLXN-01 User manual

PROAIM

PROAIM P-LTCP-01 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM P-WH-DMC User manual

PROAIM

PROAIM FF-WRLS-DR-ONE User manual

PROAIM

PROAIM Cinema Breeza Pro DL-BRZP-01 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions