Prestige APS596Z User manual

OWNER’S GUIDE

MODEL APS596Z

SECURITY / Keyless Entry

WWW.VOXXELECTRONICS.COM

2APS596Z Owners REV.B

Using Your Remote Control ................................................................................................3

Arming the Security System .............................................................................................3

Disarming the Security System.........................................................................................3

Two Stage Door Unlock (Optional) ...................................................................................3

Activating Trunk Release (Optional) .................................................................................3

Activating AUX Output (Optional) .....................................................................................3

Using the Personal Protection Alarm ................................................................................3

Bypassing the Shock Sensor............................................................................................4

Alarm City Mode ...............................................................................................................4

User Selectable Notication Chirps ...................................................................................4

User Selectable LED ............................................................................................................4

Programmed Transmitter Notication................................................................................4

Valet Mode ............................................................................................................................4

Manually Overriding the Security System .........................................................................5

Custom Code Override...................................................................................................5

Custom Code Programming..........................................................................................5

Status LED, Light Flashes and Siren/Horn Indications....................................................6

Additional 2-Way LCD Remote Functions .........................................................................7

Remote Control Button Matrix............................................................................................9

Replacing Remote Control Batteries................................................................................10

Programming Your Remote Control.................................................................................10

Warranty Information.........................................................................................................11

Table of Contents

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the button.

The parking lights will ash one (1) time, indicating the system is armed, has

locked the doors (if equipped and connected) and activated the starter disable

feature. The LED status indicator will blink steadily, once per second.

NOTE: The system is equipped with a feature called Silent Choice. If enabled,

the system requires a second press of the button to activate an audible

arming response from the vehicle.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for

more than 3 seconds.

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the button one time will

unlock only the driver’s door. Press again within three (3) seconds to unlock

the remaining doors.

Disarming the Security System

To disarm the system press the button. The parking lights will ash one

(2) times , indicating the system is disarmed and has unlocked the doors (if

equipped and connected).

NOTE: The system is equipped with a feature called Silent Choice. If enabled,

the system requires a second press of the button to activate an audible

disarming response from the vehicle. If your system is set up for 2 step unlock,

a third press of unlock will activate the audible response.

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the button

for three (3) seconds will open the vehicle’s trunk or hatch.

Activating the AUX Ch. 3-7 Output (Optional)

AUX channel output is an optional feature and programming is required at the

time of installation. Please consult your dealer for more information.

Using the Personal Protection Alarm (Panic)

Press and hold the or button for three (3) seconds to activate the personal

protection alarm. During panic mode, the normal function of the transmitter

buttons will be suspended. The transmitter’s and buttons can be used to

lock and unlock the door (if the option is installed). To stop the alarm, press

and hold the or button on the transmitter again for 3 seconds. The system

will automatically stop after thirty (30) seconds.

Using Your Remote Control

4APS596Z Owners REV.B

Programmed Transmitter Notication

As a security precaution each time the vehicle’s ignition is turn on the status

LED light with ash the number of transmitters programmed into the system.

This helps to identify unauthorized transmitters from accessing your vehicle.

If you believe an unauthorized transmitter has been programmed to your

system, contact your installing dealer for assistance.

Valet Mode

When valet mode is activated the status LED will light solid, and all security

and remote start functions will be disabled. To enter or exit valet mode simply

follow the steps outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the valet button.

3. The LED will turn on solid when valet mode is active.

4. Release the valet button.

User Selectable Notication Chirps

System ARM/DISARM chirps can be toggled ON or OFF without entering the

programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet button three (3) times.

The system will respond with one (1) chirp for ON or two (2) chirps for OFF.

User Selectable LED

This feature will control whether the LED is ON or OFF when the system

is Armed/Locked and can be toggled ON or OFF without entering the

programming feature banks.

1. Turn the ignition ON, OFF, ON, OFF.

2. `Press and hold the valet button for ve (5) seconds.

The system LED will respond with one (1) ash for ON or two (2) ashes for

OFF.

Bypassing The Shock Sensor

The included security shock sensor has two stages of detection, Warn-Away

and Full Trigger. To arm the system and shock sensor press the button. The

system will chirp and the lights will ash one (1) time.

To Arm the system and bypass the Warn-Away detection stage press the

button two (2) times within ve (5) seconds.

To Arm the Alarm the bypass both detection stages press the button three

(3) times within ve (5) seconds.

City Mode

City Mode allows the user to change the sound of the alarm system to make

it easily identied when the alarm is trigger. To enter City Mode press the

button four (4) times within ten (10) seconds.

Custom Code Valet Override (Optional)

Unlike the default Valet Override, Custom Code Override is a user

personalized code that o󰀨ers a higher lever of security. If the user chooses to

use Custom Code Override, Feature Bank 2 ; Feature 9 must be programmed

for “Custom Code”. Once the option has been selected the code must be

programmed. Once the Custom Code is programmed it cannot be changed

without rst disarming the alarm.

Custom Code Override Procedure

The Custom Code is made up of 2 numbers. Each chosen number must be

between digits 1-9. The default Custom Code is “11”. To disarm the alarm

using the Custom Code option:

1. Turn the vehicle ignition to ON.

2. Within ve (5) seconds, Press the valet button one (1) time.

3. Within ve (5) seconds, Turn the ignition OFF/ON.

4. Within ve (5) seconds, Press the valet button one (1) time.

5. Turn the vehicle ignition to OFF then ON to start the vehicle.

Custom Code Programming Procedure

In this example, the user has selected Custom Code “23”. To program a user

selected custom code:

Start with the alarm disarmed.

1. Turn the ignition to the ON position.

2. Within ten (10) seconds, press the valet button three (3) times to

enter programming.

3. Within ten (10) seconds, Cycle the ignition OFF/ON, OFF/ON, OFF/

ON. The system will beep one (1) time.

4. Within ten (10) seconds, Press the valet button two (2) times. This

number will indicate the rst digit of the chosen Custom Code.

5. Within ten (10) seconds, Cycle the ignition OFF/ON.

6. Within ten (10) seconds, Press the valet button three (3) times. This

number will indicate the second digit of the chosen Custom Code.

7. Cycle the ignition OFF.

If the Custom Code was accepted the LED will ash the rst number (2),

pause, then the second number (3). This will repeat two (2) more times to

conrm the Custom Code entry. If after fteen (15) seconds the LED does not

ash please repeat steps 1-7.

6APS596Z Owners REV.B

Status LED Flash Indications

LED Flashes Function

OFF Disarmed

Slow Flash Armed

Fast Flash Passive Arming Countdown

ON (Solid) Valet Mode

1 Flash / Disarmed Zone 1 Trigger, Shock Sensor

2 Flashes / Disarmed Zone 2 Trigger, Trunk / Hood

3 Flashes / Disarmed Zone 3 Trigger, Door

Siren/Horn Chirp Indications

Chirps Function

1 Arm

2 Disarm

3 Door Ajar Upon Arming

4 Disarm / Triggered

Parking Light Flash Indications

Flashes Function

1 Arm

2 Disarm

3 Disarm / Triggered

ON (Solid or Slow Flash) Remote Started

Status LED, Light Flashes, and Horn Indications

Manually Overriding the Security System

Your system can be disarmed without the use of the transmitter. This is

necessary to operate your vehicle if the transmitter is lost or its battery fails.

To by-pass the alarm system;

1. Open the vehicle door. The alarm will sound.

2. Turn the ignition key to the ON position.

3. Within ten (10) seconds, press and release the valet button.

The alarm system will stop sounding and enter the (by-passed) mode. You

can now start and operate the vehicle normally.

Additional Features of the Optional 2 Way LCD Remote Control

2 Car Mode

To control a second security system enter 2 car mode by pressing &

and together for ve (5) seconds. When the icon appears on the

transmitter’s LCD screen it will control the second security system. Use the

same method to exit 2 car mode and resume control of the original vehicle’s

security system.

NOTE: A second security system must be installed and the LCD transmitter

must be learned to it before this feature will operate the additional system.

Parking Meter Countdown

The parking meter countdown timer has 6 preset times, to access the preset

times and begin countdown press and hold the

button then press and

release

OPT

, each additional press of

OPT

will increase the countdown

time.

Stopping LCD Trigger Melody

To stop the alarm trigger melody if the system has been triggered WITHOUT

disarming the system, press button one time only, this will send a lock

command to the vehicle at this time and the alarm will silence.

Battery Save Mode

While in POWER SAVE MODE the 2-Way LCD transmitter will NOT look

for any incoming signals from the main unit until a button is pressed. The

LCD screen will display to indicate that power save mode is ON. To enter

power save mode press and hold

then press .

Melody / Vibration Mode

To have the remote control vibrate or play a melody tone each time it

receives a response from the vehicle press and hold

then press and

release .

Display Illumination

Press and hold the

button for one (1) second. The display will illuminate

for ve (5) seconds.

Additional 2-Way LCD Remote Functions

8APS596Z Owners REV.B

Adjusting the Clock and Timer Settings

The clock, alarm clock and programmable countdown timer are accessed

through the Function Menu. Press and hold

for ve (5) seconds to access

the function menu, once you have accessed the feature menu press and

release

to scroll through each feature and follow the steps below to adjust

the settings for each. Press and hold

for Five (5) seconds to exit the menu.

Clock Hour Press to increase or

OPT

to decrease

Clock Minute Press to increase or

OPT

to decrease

Alarm Clock Hour Press to increase or

OPT

to decrease

Alarm Clock Minute Press to increase or

OPT

to decrease

Alarm Clock Alert Tone Press or

OPT

to change tone

Alarm Clock ON / OFF Press to turn ON or

OPT

to turn OFF

Countdown Timer Hour Press to increase or

OPT

to decrease

Countdown Timer Minute Press to increase or

OPT

to decrease

Shutdown Alert Tone Press or

OPT

to change tone

Countdown Timer ON / OFF Press to turn ON or

OPT

to turn OFF

Remote Start Alert Tone Press or

OPT

to change tone

Additional 2-Way LCD Remote Functions

Lock / Arm

Door Open

Hood Open

Engine Runnin

Valet Mode

Shock Sensor

Vibrate Mode

Unlock / Disarm

Alarm Clock

Transmitting

Battery Indicator

Timer Start

Time Display

Trunk Open

Alarm Notification

Remote Start Shutdown

1 / 2 Car Mode

Shock Sensor OFF

Remote Page

Out Of Range

Power Save Mode

Temp Start

Count Down Timer

Temp Display

LCD Remote Control Icons

Func�on Opera�on

Lock

•

Press 1x

Unlock

•

Press 1x

Trunk Release

•

Press & Hold, 3sec

Remote Start

•

Press 2x

PanicON/OFF

•

Press & Hold, 3sec

Menu Op�on

•

Press & Hold, 3sec

2nd Car Mode

• •

Press & Hold, 3sec

24hr Start Timer

• •

Press 1x

Power Save Mode

• •

Press 1x

Vibrate ON/OFF

• •

Press 1x

Temp Set F/C

• • •

Press 1x

Temp Start

• •

Press 1x

Temp Query

• •

Press 1x

Alarm Clock ON/OFF

• •

Press 1x

Count Down Timer

• •

Press 1x

Programable AUX

•

Press 1x

Programable AUX

• •

Press 1x

Programable AUX

• •

Press 1x

Programable AUX

•••

Press 1x

Programable AUX

• • •

Press 1x

Programable AUX

• • •

Press 1x

Programable AUX

• • •

Press 1x

OPT F

Remote Control Button Matrix

10 APS596Z Owners REV.B

5 Button Remote Control - Model 185SP

The CR2032 battery inside each remote control should last approximately one

(1) year under normal use. When the batteries become weak you will notice

the remote control range (the distance from the vehicle the remote control will

work) deteriorate and the small LED on the remote control will dim. To replace

the remote control batteries:

1. Using a coin, disassemble the halves of the remote control.

2. Remove the old battery, observing the +/- symbols on the batteries

and replace with a new battery.

3. Reassemble the halves of the remote control.

4. Test operation of the remote control.

Replacing The Batteries

2 Way LCD Remote Control - Model 18LCDSP

The CR2450 battery inside the 2-way LCD remote control should last

approximately six (6) months under normal use. When the battery becomes

weak you will notice the remote control range (the distance from the vehicle

the remote control will work) deteriorate and the battery icon on the LCD

remote control will show 1 bar or less.

1. Gently slide the battery cover o󰀨 of the remote control.

2. Remove the old battery, observing the +/- symbols on the battery,

and replace with a new battery.

3. Gently slide the battery cover on to the back of the remote control.

4. Test operation of the remote control.

1. Cycle the vehicle ignition ON.

2. Press and release the valet button three (3) times.

3. Press button of each transmitter you wish to program, the LED’s will

ash to conrm each transmitter.

4. Turn the vehicle ignition OFF.

NOTE: This system has one (1) button programming which programs all

channels of the system.

NOTE: The system will hold up to four (4) transmitters in memory,

programming a 5th transmitter will erase the oldest transmitter in memory.

Programming Your Remote Control

This manual suits for next models

Table of contents

Other Prestige Car Alarm manuals

Prestige

Prestige Platinum APS-787C User manual

Prestige

Prestige APS-25-CL User manual

Prestige

Prestige Platinum+ APS-596 User manual

Prestige

Prestige Prestige Platinum APS 600 User manual

Prestige

Prestige APS-43HJ User manual

Prestige

Prestige APS-25E User manual

Prestige

Prestige APS-20B User manual

Prestige

Prestige Prestige Platinum 128-8128 User manual

Prestige

Prestige Prestige Platinum APS-510C User manual

Prestige

Prestige 1287181 User manual

Prestige

Prestige 1286459 User manual

Prestige

Prestige APS-997E User manual

Prestige

Prestige APS-997C User manual

Prestige

Prestige 1286462 User manual

Prestige

Prestige Prestige Platinum 128-7401A User manual

Prestige

Prestige APS 800a User manual

Prestige

Prestige Prestige APS-20B User manual

Prestige

Prestige APS-140 User manual

Prestige

Prestige 5WTX Operating instructions

Prestige

Prestige PE1BZ User manual

Prestige

Prestige APS-25E User manual

Prestige

Prestige Owner's Manual User manual

Prestige

Prestige APS25Z User manual

Prestige

Prestige Prestige Platinum 128-8122 User manual

Popular Car Alarm manuals by other brands

Clifford

Clifford 3606X owner's guide

Ultra Start

Ultra Start 2500M SERIES install guide

Ultra Start

Ultra Start 650 Series owner's manual

Audiovox

Audiovox Prestige Platinum+ APS-511C owner's manual

Sparkrite

Sparkrite SRA8 Guide

Viper

Viper 4708V owner's manual

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Installation and maintenance manual

Falcon

Falcon Predator XL3 Installer manual

Audiovox

Audiovox Auto Security XR91 Programming guide

Clifford

Clifford Sabre II owner's manual

CrimeStopper

CrimeStopper CS-8717 Wiring diagram

Ultra Start

Ultra Start 450 SERIES install guide

Scytek electronic

Scytek electronic Vectra X3 product manual

Excalibur

Excalibur AL-1860-EDPB Operation guide

Clifford

Clifford CYBER 2 owner's manual

Gemini

Gemini 7057 user manual

FlashLogic

FlashLogic FLRSBA PRESTIGE Product guide

Magicar

Magicar FAI-440 manual