Premium PAC9039 User manual

Model:PAC9039/GPAC9039/PAC12519/PMA1212/PAC12039/

PAC13039/PAD12060EN/PAD12080A/GPAC12039/PAC18039/

PAD18060EN/GPAC18039/PAC24039/PAD24060EN/GPAC24039/

PAC30039/PAC36039

SPLIT TYPEACAND MULTI SPLITAC SERVICE MANUAL

CONTENTS

Section 1 Important

Notice.....................................................................................1

Section 2 Remote Controller Introductions.......................................................2

Section 3 Electronic Controller Introductions..................................................9

Section 4 The Disassembly And The Relating Attention Issues To The

Part Of Product...............................................................................................18

Section 5 Trouble Shooting Guide ...............................................................24

Section 6 Exploded View............. .....................................................................34

Section 7 Cooling Cycle Diagram ..................................................................39

Section 8 Wiring Diagram.................................................................................40

Section 9 Service Record....................................................................................42

Section 1 Important

Notice

This service manual is intended for use by individuals possessing adequate backgrounds of

electrical, Electronic and mechanical experience, any attempt to repair the appliance may

result in personal injury and property damage. The manufacturer or seller cannot be

responsible for the interpretation of this information. Nor can it assume any liability in

connection with its use.

The information. Specifications and parameter are subject to change due to technical

modification or improvement without any prior notice. The accurate specifications are

presented on the nameplate label.

How to order spare parts

To have your order filled promptly and correctly. Please furnish the following information:

1. Model No. with Indoor or outdoor

2. No. in the Explosion View

3. Part Name

4. The quantity you ordered

Section 2Remote Controller Introductions

a. Names and functions of the button

The closing state of remote controller:

①“+” button

This button can set room temperature.

Press it once, the temperature increases 1℃.Press it continuously, the temperature

increases at the speed of 4℃/s.

This function is invalid when the appliance at the Fan and Auto mode.

②“SWING” button

Press the button, the horizontal airflow direction plate can adjust automatically. When you

have the desired wind direction, please press it again, the airflow direction plate will stop at

the situation.

③“FAN” button

Use to select the indoor fan motor speed: “Power”、“High” 、“Low” 、“Mute”

Remark: The floor standing type select fan speed only from “Low” to “High”.

④“MODE” button

Which enables you to select different operation modes after each pressing, the operation

mode will be changed. It shows in the following display:

⑤“-” button

This button can set room temperature.

Press it once, the temperature decreases 1℃. Press it continuously, the temperature

decreases at the speed of 4℃/s.

This function is invalid when the appliance at the Fan and Auto mode.

⑥Button

You can start the air-conditioner by pressing this button and stop its operation by pressing

it again.

The opening state of remote controller:

①“+” button

This button not only can adjust clock time and

the timer time but also can set room humidity.

Adjusting clock time and timer time

Press it once, the time increases one minute.

Press it for 1 to 3 seconds, time display will

increase at the speed of 2min/s.

For 3 to 5 seconds, it will increase at the speed of

10min/s.

For more than 5 seconds, it will increase at the

speed of 10min/s.

Setting room temperature and room humidity

Press it once, the humidity increases 5%.

②“HEALTH” button

Press this button, the LCD shows the

“”

symbol, the anion emission function of the air

conditioner is started.

Press the button once again, the

“

”

symbol

disappears, the function is cancelled at the same

time.

③“SLEEP” button

Press this button, the LCD shows the symbol, the sleeping function of the air

conditioner is started. After 7 hours of setting this function, the air conditioner will be off

automatically.

Press the button once again, the symbol disappears, the function is cancelled at the

same time.

This function is invalid when the appliance under the Fan mode.

④“POWER” button or “POWER/QUIET” button

When it displays “POWER” button:

Press this button, the fan speed reach the highest, press it again it resume the foregoing fan

speed.

When it displays “POWER/QUIET” button:

Which enables you to select different operation mode, after each pressing, the operation

mode will be changed. It shows in the following display.

This function is only suitable for frequency variable appliance.

⑤“HUMIDITY” button

Only under the mode of Heat and Fan, Press this button once, the LCD shows the symbol,

the wetting function of the air conditioner is started. The initial humidity is 60%. Press the ”+”

or “-“ button once , the humidity increases or decreases 5%. The setting range is 30%~60%.

Press the button once again. The symbol disappears. the function is cancelled at the

same time.

⑥“TIMER/CLOCK” button

Setting the “ON/OFF” timer time

When remote controller is at the on/off state, Press this button, the LCD flickers the

symbol. Press the “+”or “-”button to set the timer time. After finishing it. Press

this button again in 10 seconds to affirm. If the setting time is the same as the current time,

this setting is invalid.

Press the button once more. The symbol disappears. The function is

cancelled at the same time.

Adjusting the clock time

Press this button in 5 seconds under the state of no timer setting, the LCD flickers the

symbol. Press the “+” or “-” button to set the timer time, After finishing it, press this

button again in 10 seconds to affirm. If not, this operation is invalid.

⑦“-” button

This button not only can adjust clock time and the timer time but also can set room humidity.

Adjusting clock time and timer time

Press it once .the time decreases one minute. Press it for 1 to 3 seconds, time display will

decrease at the speed of 2min/s.

For 3 to 5 seconds. It will decrease at the speed of 10min/s.

For more than 5 seconds. it will decrease at the speed of 10min/s.

Setting room temperature and room humidity

Press it once .the humidity decreases 5%.

⑧Button

You can start the air-conditioner by pressing this button and stop its operation by pressing it

again.

⑨“FEELING” button or “LOUVER” button

When it displays “FEELING” button:

Press this button can be used to set the feeling function.

The LCD shows the actual room temperature when the function set and it shows the setting

temperature when the function cancelled.

This function is invalid when the appliance at the Fan mode.

When it displays “LOUVER” button:

Press this button, the vertical wind direction vanes can rotate automatically. When you have

the desired horizontal wind direction, press it again, the vertical wind direction vanes will be

stopped at the situation of your choice.

b. Application method

Fix batteries

1. Slide opens the cover according the direction indicated by arrowhead.

2. Put into two brand new batteries (7#). Position the batteries to right electric poles (+&-).

3. Put back the cover.

Make sure to connect the wire to independent power source socket before you use the remote

controller.

Note: the waste battery shall be disposed properly.

Cooling / Heating operation mode (Cold wind type has no heating function)

1. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the

Cooling or Heating mode.

Press the button again. the air-conditioner stops.

2. Press the MODE button. select the Cooling or Heating operation mode.

3. Press “ + ” or “ - ” the button. set the temperature range from 16℃to 32 .℃

3. Press the “ FAN ” button. you can select fan speed from “ Low ”、“ Mid ”、“ High ”、“ Auto

”.

Drying operation mode

1. Press the MODE button. select the dry mode operation.

2. Press “ + ” or “ - ” the button. set the temperature range from 16℃to 32℃.

3. Press the “ FAN ” button. you can select fan speed.

The type of H、M series:

You can select fan speed from “Power”、“High”、“Low”. “Mute”.

The type of E series:

You can select fan speed from “Auto”、“High”、“Mid”、“Low”.

4. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the

Dry mode.

Press the button again. the air-conditioner stops.

Circulation operation mode

1. Press the MODE button. select the Circulation operation mode.

2. Press the “ FAN ” button. you can select fan speed.

The type of H、M series:

You can select fan speed from “High”、“Low”、“Mute”.

The type of E series:

You can select fan speed from “High”、“Mid”、“Low”.

3. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the

Circulation mode.

Press the button again. the air-conditioner stops.

Remark: In the circulation operation mode. To set the temperature is no effective.

Automatic operation mode

1. Press the MODE button. select the automatic operation mode.

2. Press the “ FAN ” button. you can select fan speed.

The type of H、M series:

You can select fan speed from “Power”. “High”. “Low”. “Mute”.

The type of E series:

You can select fan speed from “Auto”. “High”. “Mid”. “Low”.

3. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the

Automatic mode.

Press the button again. the air-conditioner stops.

Remark: In the automatic operation mode. to set the temperature is no effective.

Clock time setting

1. Pressing the TIMER/CLOCK button for 5 seconds. the time indicator at present begins to

glimmer.

2. Adjust present time through pressing the or button.

3. Pressing the TIMER/CLOCK button once again. the time setting is finished.

Remark: Time can be regulated only after the timing mode is cancelled.

Timer setting

Set the “ Timer ON ” ( It is effective only when the air conditioner is shut off ).☆

1. Press the TIMER/CLOCK button. the remote controller display “ ” intermittently.

2. Adjust time through pressing the or button.

3. Press the TIMER/CLOCK button once again. the “ Timer ON ” setting is finished.

Set the “ Timer OFF ” ( It is effective only when the air conditioner is running ).☆

1. Press the TIMER/CLOCK button. the remote controller display “ ” intermittently.

2. Adjust time through pressing the or button.

3. Press the TIMER/CLOCK button once again. the “ Timer OFF ” setting is finished.

Sleeping operation mode

1. Press the “ SLEEP ” button. the sleeping indicator light of indoor unit flashes on.

2. After the setting of sleeping mode. the cooling operation enables the set temperature to

increase 1 after 1 hour and another 1 automatically after 1 hour.℃℃

3. After the setting of sleeping mode. the heating operation enables the set temperature to

drop 2 after 1 hour and another 2 automatically after 1 hour.℃℃

4. The air-conditioner runs in sleeping mode for 7 hours and stops automatically.

Remark: Press the MODE button or ON/OFF button. The remote controller clears

sleeping mode away.

c. Attention

★ The remote controller transmits signals to the system.

★ Aim the remote controller towards the receiver on the air-conditioner.

★ The remote controller should be within 8 meters away from the receiver.

★ No obstacles between the remote controller and receiver.

★ Don’t drop or throw the remote controller.

★ Don’t put the remote controller under the forceful sunrays or heating facilities and other

heating sources.

★ Use two 7# batteries, don’t use the electric batteries.

★ Take the batteries out of remote controller before stop its using for long.

★ When the noise of transmitting signal can’t be heard indoor unit or the transmission symbol

on the display screen doesn’t flare, batteries need be replaced.

★ If reset phenomenon occurs on pressing the button of the remote controller, the electric

quantity is deficient and new batteries need to be substituted.

This manual suits for next models

Table of contents

Other Premium Air Conditioner manuals

Premium

Premium PPA1207 User manual

Premium

Premium PWA0810N User manual

Premium

Premium PIA12061 User manual

Premium

Premium PAC36007 User manual

Premium

Premium PAC12040A User manual

Premium

Premium PWA1210G User manual

Premium

Premium PPA1208J User manual

Premium

Premium PAC24039G User manual

Premium

Premium PAC9028 User manual

Premium

Premium PAC9060 User manual

Premium

Premium PIA122690A User manual

Premium

Premium PWA1210N User manual

Premium

Premium PIA9066A User manual

Premium

Premium PAC366FC-I User manual

Premium

Premium PIAW9169A User manual

Premium

Premium PAD12060ENW/S User manual

Premium

Premium PIA9064A User manual

Premium

Premium PIA9066A User manual

Premium

Premium PAC3003711A User manual

Premium

Premium PIAW Series User manual

Premium

Premium PAC1203711 User manual

Premium

Premium PIAW9164A User manual

Premium

Premium PWA0510G User manual

Premium

Premium PPA9004J User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual