Polycom KIRK User manual

ActivAtion Guide

Polycom KIRK Base and Handset Activation Process

Base Unit Activation

Before activating any handsets assigned to the base, you must activate the base unit.

Here’s how:

1. Equipment Connected—Make sure the base (and handsets) you want to activate are connected

and powered up.

2. Order Shipped Email—Refer to the Order Shipped email for the Activation Codes for the base

unit.

3. Turn on a new handset.

• You will see Enter AC (Activation Code) on the phone screen.

• Enter the code 0000 to enable the handset to communicate with the base unit.

Enter AC code...

Number:

00000

OK Exit

Auto-subscription

KIRK

TIP: If you are not prompted to

Enter AC, power down the

handset, wait 2 minutes

and power it up again. If

that fails, please refer to

the Advanced Activation

section of this document

for instructions.

ActivAtion Guide

Polycom KIRK Base and Handset Activation

4. Dial 1 to enable the handset to temporarily connect to the base.

Save Delete

Dialing

KIRK

587421094459#

Mic Mute Loud on

Connected with

KIRK

• Enter the activation code for the base, followed by the #key.

• You will hear a recorded message conrming your activation was successful.

• You will see a ashing red light on top of the base unit while it automatically restarts.

• After a few minutes, you will see a solid green light on the base unit.

You are now ready to activate the handsets for this base.

ActivAtion Guide

Polycom KIRK Base and Handset Activation

Handset Activation

Once you’ve activated the base, you can now connect the handsets to it.

Important: If you have multiple handsets, be sure to activate your handsets in the exact order specied in the Order Shipped email.

1. Order Shipped Email—Refer to the Order Shipped email for the Activation Codes for the handset(s) you wish to activate. This email also

species the order to activate them in.

2. Check Your Base Unit—Be sure you’ve already activated the base unit and it is within 100 feet of the handset(s).

3. Power Down Handset—Power down the handset you are activating by holding down the left softkey for 2 seconds, then press Yes.

4. Power Up Handset—Wait 2 minutes, then hold down the left softkey for 2 seconds to power up the handset.

5. Enter Activation Code—You will see Enter AC (Activation Code) on the phone screen. Enter the 4-digit activation code for the handset.

Enter AC code...

Number:

5683

OK Exit

Auto-subscription

KIRK

TIP: If you are not prompted to

Enter AC, power down the

handset, wait 2 minutes

and power it up again. If

that fails, please refer to

the Advanced Activation

section of this document for

instructions.

After you enter the activation code, you will see Connecting... on the handset screen.

Connecting...

Auto-subscription

KIRK

Shortcut Menu

1002

KIRK

Shortcut

16:57

You will see your extension number on the display. Your handset is ready to use.

ActivAtion Guide

Polycom KIRK Base and Handset Activation

NASDAQ: EGHT

www.8x8.com

The Champion

For Business

Communications

Advanced Section for Activation (use only if needed)

Use this method to manually enter an activation code ONLY if you cannot get the Enter AC prompt or if a connection to the base you want to

connect to fails.

To manually enter an activation code

1. Using the softkey sequence: [Menu] ›[Settings] ›[Advanced] ›[Login] ›[Create Login] ›{Select Base Unit] ›[Enter AC]

2. Enter Activation Code—Enter the activation code and press the # key.

How to select base units

If you have multiple base units, after you select Create Login, you may need to select the base unit you need to connect to from a list of

base units. This is done based on the ARI number printed on the back of the base units. Just select the ARI number of the base unit you are

connecting to.

If you encounter diculty after a few attempts to activate, please contact 8x8 Support at 888.898.8733.

Do not press the reset button on the base unit, unless instructed to by 8x8 Support, as it will do a full factory reset and you

will lose your ability to connect your cordless KIRK phones to 8x8 phone service.

Other manuals for KIRK

Table of contents

Other Polycom Telephone manuals

Polycom

Polycom SoundStation 2Avaya2490 Instruction Manual

Polycom

Polycom SoundPoint IP 4000 Reference guide

Polycom

Polycom VVX 411 User manual

Polycom

Polycom VVX 300 User manual

Polycom

Polycom VVX 500 series User manual

Polycom

Polycom VVX 300 User manual

Polycom

Polycom VVX 400 Series Assembly instructions

Polycom

Polycom VVX 201 User manual

Polycom

Polycom VVX 300 User manual

Polycom

Polycom VVX 500 series Instruction manual

Polycom

Polycom VVX Camera User manual

Polycom

Polycom VVX 501 User manual

Polycom

Polycom Integra VVX 500 Instruction manual

Polycom

Polycom VVX 400 Assembly instructions

Polycom

Polycom VVX-350 Series User manual

Polycom

Polycom Virtual PBX User manual

Polycom

Polycom VVX 450 User manual

Polycom

Polycom Polycom VVX 600 Assembly instructions

Polycom

Polycom Integra VVX 500 User manual

Polycom

Polycom VVX 500 series User manual

Polycom

Polycom VoxBox Manual

Polycom

Polycom SoundPoint IP 600 SIP User manual

Polycom

Polycom VVX 401 User manual

Polycom

Polycom SoundPoint IP 331 User manual

Popular Telephone manuals by other brands

GE 2-9480 user guide

Geemarc

Geemarc PHOTOPHONE 155 user guide

D-Link

D-Link DWR-720/PW user manual

Interquartz

Interquartz Gemini IQ333 operating instructions

SSS Siedle

SSS Siedle HT 840-0 operating instructions

Motorola

Motorola TITANIUM manual

Panasonic

Panasonic ICX Quick reference guide

LG H870DS user guide

Samsung

Samsung GT-I9500 Service manual

AT&T

AT&T Trimline 205 user manual

Selta

Selta zenyth 600 user guide

Doro

Doro AFTI 20 user guide

UNIQCELL

UNIQCELL A1 user guide

Panasonic

Panasonic KX Series User Sheet

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone manual

BT Decor 425 user guide

NEC

NEC SV8500 Reference sheet

Teledex

Teledex PEARL user guide